Added reply in a thread Twitchy front end solutions 6/9/2021 6:51 PM

Have thought about a link but I just put on a new chain. .8 hours on it. I put the forks back to 2.5mm height and that didn’t seem to alleviate it. Messed with air pressure a bit but going higher I think made it feel even more nervous. My track is very ... more »

Added reply in a thread 2000 CR250 Polisport Restyle Kit 6/9/2021 11:43 AM

... more »
Added reply in a thread 2000 CR250 Polisport Restyle Kit 6/9/2021 11:40 AM

Added reply in a thread Twitchy front end solutions 6/9/2021 10:40 AM

Yup got it. I think I will start with sag and then the fork height.

Added reply in a thread 2000 CR250 Polisport Restyle Kit 6/9/2021 6:26 AM

I put one on a 2000 cr125. can send pics if interested. I used a 02 and up fuel tank, and airbox. Can use a newer style subframe but the subframe on the 2000 is the same except for the location of the silencer mount. That I cut off and had welded back ... more »

Added reply in a thread Twitchy front end solutions 6/9/2021 5:22 AM

This is on a 2019 rmz 250. 9 hours on tires. Mx33s. I did try to go a few clicks stiffer on fork compression and the difference in handling was minimal, maybe placebo. But the front end felt then felt pretty rigid and braking bumps and jump landings ... more »

Added reply in a thread Twitchy front end solutions 6/8/2021 8:25 PM

Solid advice haha. I guess more I think about it it’s low to moderate speed. High speed feels ok

Started new thread Twitchy front end solutions 6/8/2021 7:58 PM

Any suggestions for a twitchy feeling front end? Sag is set at 105mm. Fork 5mm up from stock. 12 psi front and rear. New steering stem bearing and have tightened head tube. Front wheel seem to really dance around at moderate speed. Low speed feels ok ... more »

This forum thread has 38 replies

Added reply in a thread 1991 rm125 frame guard help 6/5/2021 6:24 PM

Are you interested in selling??

Added reply in a thread YZ125 Wont Crank Up 6/2/2021 12:48 PM

What compression numbers are you getting? Have you check reeds and cage? I would check to make sure your crankcase isn't full of fuel also. Should have bright blue spark.

Added reply in a thread 1991 rm125 frame guard help 5/29/2021 9:42 AM

Tried out some kydex works ok. Not as sleek as an actual frame guard but definitely better than nothing
Added reply in a thread Herlings secret button 5/26/2021 8:30 AM

Push it and the one on the bars at the same time and it takes a screenshot.

Added reply in a thread Stiffie Brand YZ250 in the works 5/26/2021 7:47 AM

I still can't get over the style on this bike! Can't wait to see the finished product.

Added reply in a thread 2021 RMZ 250 [no longer frugal build, informative thread] 5/24/2021 12:52 PM

Bike looks awesome! Nice work. Will we be seeing a custom seat cover to go with those graphics too??

Added reply in a thread ISO Current Gen RMZ Complete Seat 5/21/2021 12:32 PM

PM'd you

Started new thread ISO Current Gen RMZ Complete Seat 5/21/2021 10:46 AM

Does anyone have a complete seat for a current gen RMZ. Would like to put a bump in one and keep my stock one too.

This forum thread has 5 replies

Added reply in a thread Top-end refresh.. To pull or not to pull 5/21/2021 6:42 AM

I have never pulled a whole engine for simply a top end rebuild.

Added reply in a thread Durable motocross pants 5/19/2021 8:34 AM

I would second the TLD gear. Never ripped a set of TLD pants strictly from wear only if caught on something. Seven gear I have had the worst luck with. Comfortable and great looking but just haven't ever held up well for me.

Added reply in a thread New bike to replace 250f? 5/19/2021 7:53 AM

I'd vote for the 125/150 idea also. I'm 200lbs with full gear and in the fast novice/slow intermediate range and a 250cc 2 stroke is too much power for me to have fun on. I have way more fun pushing a 125cc around. Super good tool for improving carrying ... more »

Started new thread Lowering Links? 5/19/2021 6:46 AM

What's you thoughts on lowering links? I have a 2019 rmz250 and I am 5'9" tall. I have the front and rear suspension set up pretty well for my comfort level now and running 105mm sag. The bike still feels a bit to tall for my liking. I had a kx250f before ... more »

This forum thread has 2 replies