Added reply in a thread “Brand New” 2015 KX250f Build 7/7/2021 9:43 AM

Not saying that is your issue but a good place to start seeing as the bike has sat for awhile. Good maintenance too for a bike that is 6 years old. If that doesn't cure it I'd check injector streams. These bikes have two. One at the throttle body and ... more »

Added reply in a thread “Brand New” 2015 KX250f Build 7/7/2021 8:59 AM

https://www.partsgiant.com/p387683-all-balls-fuel-pump-rebuild-kit?m=22184706&gclid=EAIaIQobChMI9crX66nR8QIVRW1vBB1rbQD1EAQYAiABEgLvbvD_BwE

Added reply in a thread “Brand New” 2015 KX250f Build 7/6/2021 7:04 AM

I had a 2015 for three years and loved that bike. As far as the cutting out goes I’d say pull the pump and replace the filter.

Added reply in a thread Tracks near Sioux falls? 6/27/2021 8:56 AM

I’m from about an hour and a half from Sioux Falls. Homer Nebraska has Fiddler Creek which is a really nice facility. Yankton sd also has a track. Diamond park mx in lakefield mn also. I believe most of these places operate on yearly membership programs ... more »

Started new thread When is it time to sell? 6/25/2021 6:41 AM

I am 34 years old, work a job plus own my own business. I have always had a dirt bike since I was around 7 or 8 years old. With kids, business, getting older, I just don't find much of anytime to ride. Maybe 1-2 times a month if I am lucky and then in ... more »

This forum thread has 38 replies

Added reply in a thread What happened to Klotz? 6/25/2021 5:28 AM

I currently run klotz supertechniplate in all my two strokes. Almost no spooge and smells amazing.

Added reply in a thread 06 kawasaki 450f no start 6/23/2021 6:10 AM

Stretched valves or valve springs are compressed passed service limit? Just had this on a high hour CRF.

Added reply in a thread Dilan Schwartz, Top 10 6/21/2021 8:13 AM

Good to see him gaining momentum and be great for him to get an offer from a factory team...that being said, sure is nice seeing him giving some success to BarX and Suzuki and putting the yellow bike in the mix. There was an interview with him recently ... more »

Added reply in a thread Bike shifts on stand but not riding 6/12/2021 7:12 PM

Took it for another ride. I can go first into second and then not third. On the stand, can go first into second and then second to third take a bit of playing with the rear wheel then fourth, fifth fine and all the way down to first is fine on the stand. ... more »

Added reply in a thread Bike shifts on stand but not riding 6/12/2021 6:11 PM

Yes shifts into first then that’s it. On the stand spinning the wheel shifts through al gears like normal. Basket was notched but couldn’t find a new one so I filed down the old. Still felt little notching but nothing insane.

Added reply in a thread Bike shifts on stand but not riding 6/12/2021 5:29 PM

Nope all shifted fine before and after cased assembled. Forks looked ok and nothing looked over warn. Put cases together and shifted good. Put in bike and shifts good. When riding won’t shift though.

Started new thread Bike shifts on stand but not riding 6/12/2021 4:52 PM

1991 rm125. Just did a complete rebuild. Every shifted fine on engine stand. Put bike all back together and shifted fine in the bike and on the stand. Then riding I can’t through the gears. Bent shift fork?

This forum thread has 8 replies

Added reply in a thread 2016 rmz250 more low end?? 6/11/2021 8:12 PM

Ya try that. I’m wondering if it’s a fuel delivery problem maybe

Added reply in a thread 2016 rmz250 more low end?? 6/11/2021 6:19 PM

Does the problem get better or worse if you use one of the other mapping plugs?

Added reply in a thread Twitchy front end solutions 6/11/2021 4:15 PM

Never mind, 2 lower in front and rear calls for the same as stock

Added reply in a thread Twitchy front end solutions 6/11/2021 4:08 PM

Ya looks like 2 rates lower in front and shock stock is 5.6 and my recommended is 5.48 and says use the closest so I’m in between stock and one rate lower

Added reply in a thread Twitchy front end solutions 6/11/2021 6:52 AM

Ya I am no where in the realm of pro. I'm 33 and upper end of C class on a good day. I don't race but maybe once a year anymore and ride strictly for the fun of it. With full gear on I am at 205 lbs. Race Tech calls for .46 springs and stock is .50. ... more »

Added reply in a thread Twitchy front end solutions 6/10/2021 6:59 PM

So I tried tires at 14 and it did seem like I had more front end bite in corners but didn’t really change the straight line nervous feeling. I dropped the compression on the forks 2 clicks and found out I’m at the end of my clickers. It was maybe marginally ... more »

Added reply in a thread Twitchy front end solutions 6/10/2021 2:29 PM

Thanks for the input everyone. Hopefully tonight I can test again. Gonna try and lower my fork compression and try. Then give the tires a try at that 16 psi area.

Added reply in a thread 2022 rmz's 6/10/2021 12:27 PM

Will there be all this hate when the yz125 and yz250 comes out with the same model again since 2006 with no e start? Funny how Suzuki is always the one taking it.