Added reply in a thread Help needed with carb tuning 9/6/2021 7:10 PM

So PC site says standard needle, standard main, standard pilot but clip in 2nd position. Manual says 4th position. 2nd would make the needle higher. Does that sound right?

Started new thread Help needed with carb tuning 9/6/2021 6:45 PM

I have a 1991 rm125 that I need some carb expert help with. Bike starts, idles, and runs great up to mid rpms. Then almost sounds like a 4 stroke rev limiter. On the track, it’s hit and miss. If you hold it on while it’s blubbering for awhile it’ll take ... more »

This forum thread has 10 replies

Added reply in a thread What happened to "The Gear Industry is over-saturated"? 9/1/2021 12:44 PM

I'm always for more options, whether it's gear, graphics, or bikes in general. If there were only a few options things would get pretty boring and repetitive pretty fast.

Added reply in a thread Fasthouse Gear 8/30/2021 8:02 AM

I just got my first set of Fasthouse pants and went up one size from my normal size. I am normally 32 and the Fasthouse 32 fit but I would say were slightly more snug than what would be comfortable for a full day of riding. My 34s now are probably a ... more »

Added reply in a thread Anstie out... 8/27/2021 8:58 AM

Ya that sucks for him. He's had a pretty rocky season and the past few races looked like things were starting to click and improve.

Added reply in a thread Non ethanol gas 8/27/2021 6:37 AM

T4 is a great replacement for pump gas. I looked to it for the same reasons your are, just didn't want fuel with ethanol. Bought one 5 gallon can and never looked back. If you do a quick youtube search you can find ways guys are using to extract ethanol ... more »

Added reply in a thread 91 RM125 clutch basket ISO 8/18/2021 9:22 AM

Oddly enough I was going to cerakote it burnt bronze. I media blasted it and a few days later it looked like this. After a week or so it had some oily spots on it so I blasted it again and now it just looks raw aluminum. I'd like to get that color back ... more »

Added reply in a thread 91 RM125 clutch basket ISO 8/18/2021 9:15 AM

If its possible could you have him snap a pic?

Added reply in a thread Cobra 125 8/17/2021 9:35 AM

I would sell both my bikes if I could get a Cobra 125 that looked like those 2021 Cobra SRX50 FWE

Added reply in a thread HRC, Kxf, team Suzuki parts. Make offer. 8/17/2021 8:40 AM

What years does the suzuki shifter fit?

Added reply in a thread Just an idea… please help! 8/13/2021 6:13 AM

I think you have a solid idea there. I think $10 is a decent rate but I would not take the risk of you doing the washing. If the customer washes the bike themselves that takes away liability from you if parts are ruined, bikes won't start and blame it ... more »

Added reply in a thread Electric start vs kick starting. 8/9/2021 8:39 AM

I don't know if anyone is arguing that kickstart is better than estart. I think its more that a kicker on a bike, for many consumers, is not a make or break deal and can still serve a purpose for some riders who choose it over a battery is all.

Added reply in a thread 91 RM125 clutch basket ISO 8/9/2021 6:19 AM

I never found a stock pipe. The bike came with a dented FMF and stock silencer. I was able to finally find an FMF silencer and was able to get that looking like new. For the pipe I bought a dent kit and it worked really well. It's not as perfect as I ... more »

Added reply in a thread Electric start vs kick starting. 8/9/2021 6:12 AM

In a race type scenario like this an estart button is a huge advantage. Also, in a race type scenario like this not stalling at all would be best! I have an rmz250 and a two stroke 125. No estart on either of course. However, I have a buddy that bought ... more »

Added reply in a thread 2014 ktm 50sx no start 8/7/2021 7:26 PM

Did compression test and was good. Ohmed out old stator and was weak. New one tested good. Did not do a leak test. I did pull reeds and they did not look like they were sealing well. I tried to flip reeds but still could not get a good seal. Could that ... more »

Added reply in a thread RMZ 250 Hinson Clutch hub and Pressure Plate 8/7/2021 9:53 AM

How many hours on it?

Started new thread 2014 ktm 50sx no start 8/7/2021 8:59 AM

Working on a 2014 ktm 50sx with no start issue. Has spark but looks never narrow and white. Replaced flywheel rotor, stator, spark plug, boot, wire, and coil. Tried unplugging kill switch. Still no start, still weak looking spark. Maybe spark like that ... more »

This forum thread has 3 replies

Added reply in a thread Tire changing help 8/6/2021 7:54 PM

Check out jay Clark on dirtbiketv. His tips changed my life. I used to hate changing tires and took them to my local shop. Anymore it’s one of my preferred tasks when working on a bike. Now it takes me less than 15 mins to peel off an old tire, replace ... more »

Added reply in a thread 91 RM125 clutch basket ISO 8/6/2021 6:06 AM

Ah good find! Thank you!

Added reply in a thread BAR-X SUZUKIS 8/5/2021 1:37 PM

A pretty decent number of Suzuki’s are actually doing really well at lorettas.