Added reply in a thread The search for elusive traction... 1/3/2016 6:00 PM

A 110 rear is not going to stress the motor at all, but it will help with better traction with the wider contact patch. You're not giving anything up with power either.

Added reply in a thread Chad Sanner article 12/31/2015 6:40 PM

I'll say this about Chad. He remapped my ecu for a Honda, and it came back way too lean. It was obvious, so I called him and he made it right. He next day aired me a couple to try, and said to send him back the ones that I didn't like. He was easy to ... more »

Added reply in a thread Race Tech Gold Valve HPSD 12/28/2015 6:24 PM

I've had a couple done by FC. They valve it as stiff as they can get it, makes a huge difference.

Added reply in a thread Lets See Your Suspension Coatings!! 12/27/2015 6:10 AM

What kind of performance improvements have you guys noticed after having the coatings put on?

Added reply in a thread update..110 vs 120 on a 450... 12/27/2015 5:17 AM

The 110 & 120 MX32 is a little narrower than the old MX31 for whatever reason. I run a 120 on my CRF250R most of the time, and yes I have the wider rim.

Added reply in a thread Hinson Complete clutch CRF250R 2010-2015 12/26/2015 12:12 PM

Awesome deal! If I didn't have one already, I'd grab this in a second.

Added reply in a thread Any surprise moto gifts? 12/25/2015 4:25 PM

Lol

Added reply in a thread WTB "Woody" Cr250 Graphics Ricky carmichael 12/25/2015 2:00 AM

I'd try a Throttle Jockey, I believe they were the ones that made them for Honda. Matt would probably make you a set if their not on their website.

Added reply in a thread Alias deals 12/19/2015 2:41 PM

I wondered about that when they started selling direct. I like the gear, but I thought they were going BK. Instead they just shafted their dealer network, never to return again.

Added reply in a thread KYB semi factory forks crf 250-450 12/19/2015 8:45 AM

Added reply in a thread KYB semi factory forks crf 250-450 12/19/2015 8:37 AM

Do you have the shock too? And yes, that's the kit I was told was stock suspension with coatings done only. Let me add this though too. I had asked about a new KYB Factory Kit from Technical Touch USA, and that would be the air forks. Well known suspension ... more »

Added reply in a thread Alias deals 12/19/2015 5:50 AM

Alias is good stuff!

Added reply in a thread KYB semi factory forks crf 250-450 12/19/2015 5:49 AM

So these will bolt right up on a '14 250R? Here's what I was told from a well known suspension shop, correct me if I'm wrong. The KYB factory kit is just stock suspension with coatings, nothing is different with the internal parts? Is that right?

Added reply in a thread 2014 Sprinter Van MX Build 12/16/2015 7:17 PM

Tell her it's your way or the highway. Get the Van.

Added a comment about feature ​Vital MX 12 Days of MXmas, Day 4 12/13/2015 5:36 PM
j368

I'll take it.

0 0 0

This feature has 146 comments.

Added reply in a thread 2016 KTM 350 SX-F - draining gas 12/11/2015 6:16 PM

If you're concerned about it put some Seafoam in there.

Added reply in a thread Gloucosmine 12/9/2015 6:28 PM

It does work, but you have to take it every day. Takes about 3 weeks for it to take real effect.

Added reply in a thread TLD knee braces vs. Mobious??? 12/8/2015 7:36 PM

You forgot about these. Some of the best. http://www.ossur.com/injury-solutions/products/knee

Added reply in a thread Bell Flex Moto 9 Large $475 shipped 12/8/2015 4:26 PM

If you can't get the liner changed out, and you decide you want another one let me know. I'll get one for you at my cost + tax I have to pay. UPS freight is less than $20.

Added reply in a thread help setting up a trailer 12/7/2015 7:30 PM

2 can go in facing forward, and 1 facing rearward. But I'm usually just carrying 1 bike and a pit bike, so I've got plenty of room. As others have said, the less decals on the trailer the better. Preferably no decals at all. That way you don't attract

... more »