Added reply in a thread Tc125 cutting out. 8/6/2017 7:28 PM

https://youtu.be/ILLK51VOv_0 After the 0:50 mark of this video you can hear it again multiple times. Both videos with the jetting mentioned first, I tested again at the same track, same ambient temps with the two steps richer main and the richer needle. ... more »

Added reply in a thread Tc125 cutting out. 8/6/2017 7:21 PM

... more »
Started new thread Tc125 cutting out. 8/6/2017 7:17 PM

2015 Husqvarna TC125 I have this odd issue, bike seems to want to cut out up top and not really pull as hard as I would like or as cleanly once around half throttle and up. Have had this issue for about 20 hours or so, bike has 43 on it. I got the SXS

... more »

This forum thread has 25 replies

Added reply in a thread 4cs springs fit cone valves? 7/5/2017 7:05 PM

That is exactly the info I am looking for, thank you! Will probably take them to Factory Connection once I blow a seal to save a little.

Started new thread 4cs springs fit cone valves? 7/5/2017 3:53 PM

Does anyone know if 4cs springs work in the cone valve forks? I have the correct spring rate for me in my re-worked 4cs forks and the cone valves I bought have a spring in them for a 180lb rider. Don't get me wrong the CV forks feel absolutely amazing,

smile
... more »

This forum thread has 3 replies

Added reply in a thread Cone Valve forks on a Tc125! 7/2/2017 4:42 PM

First moto at Cahuilla Creek: Hit most everything, track was pretty smooth. Tad stiff for my liking. But insanely better than the 4cs. Second moto: Took out all the pre-load as suggested by Joe, and went two out on the compression adjusters. Third moto: ... more »

Added reply in a thread Cone Valve forks on a Tc125! 7/1/2017 12:18 PM

Sweet! I will do a few laps as they are set and then start tweaking them a little. Thank you for the input and suggestions!

Added reply in a thread Cone Valve forks on a Tc125! 7/1/2017 10:26 AM

Thanks for the input, I assumed as much! Still cannot wait to try them out

smile
.
Added reply in a thread Cone Valve forks on a Tc125! 6/30/2017 10:42 PM

I LOVE that bike first of all. That is kind of what I was thinking, mine are off a 350f, setup for a 180lb rider and different skill level (according to him). I am already thinking it will need to go down a spring rate, as they are setup for a 180lb

smile
... more »
Added reply in a thread Cone Valve forks on a Tc125! 6/30/2017 5:58 PM

I did not know that Cahuilla was open Monday? I thought they were strictly Saturday, Sunday and Monday? Mmmmmm that traxx shock looks nice. Honestly I think my rear shock is pretty decent, all I have done is gone two clicks slower on the rebound, I think ... more »

Added reply in a thread Cone Valve forks on a Tc125! 6/30/2017 5:55 PM

This life is short, if you can budget other areas in your life then spend the extra on fun things

wink
. That is what I have been doing anyways haha, maybe I am doing things backwards.
Added reply in a thread WP Cone Valve 48mm forks 1850$ 6/30/2017 1:05 PM

Really great price on these forks!

Added reply in a thread Cone Valve forks on a Tc125! 6/30/2017 12:57 PM

I will bring my 4cs forks to Cahuilla when I ride Sunday and do a moto on each when the track is smooth vs. rough

smile
. It is hard for me to ride that track with my 4cs towards the end of the day on a day when the track is really rough/beat. So ... more »
Added reply in a thread Cone Valve forks on a Tc125! 6/29/2017 10:51 PM

Sunday!! Going to Cahuilla MX to test them out

smile
. Should be sweet. It gets pretty rough there later on in the day, should be great!
Added reply in a thread Cone Valve forks on a Tc125! 6/29/2017 9:14 PM

Hahahaha I'm breathing heavy too from the financial stress these just caused me

Added reply in a thread Cone Valve forks on a Tc125! 6/29/2017 8:35 PM

Added reply in a thread Cone Valve forks on a Tc125! 6/29/2017 8:33 PM

Added reply in a thread Cone Valve forks on a Tc125! 6/29/2017 8:31 PM

Started new thread Cone Valve forks on a Tc125! 6/29/2017 8:30 PM

Title says it all! Just got a set after dealing with the 4cs far too long, my setup was ok but hoping these make the bike for me. If not, I have cone valves I can transfer to other bikes

This forum thread has 30 replies

Added reply in a thread 2017 KTM 150 SX Talk 10/14/2016 6:38 PM

That's what I run. So id assume the FMF variant shorty is essentially the same.