Added reply in a thread Tesla pickup truck reveal tonight 11/21/2019 8:47 PM

Something conspicuously absent from the specs is curb weight, and GVWR

Added reply in a thread Tesla pickup truck reveal tonight 11/21/2019 8:42 PM

That thing looks like the APC from Aliens and the Johnny cab from Total Recall had a drunken

sick
Added reply in a thread Tesla pickup truck reveal tonight 11/21/2019 11:34 AM

Supposed to be 11PM ET https://www.theverge.com/2019/11/21/20975927/tesla-cybertruck-announcement-watch-live-stream-elon-musk-online-how-to-date-time

Added reply in a thread Tesla pickup truck reveal tonight 11/21/2019 11:30 AM

I'll check it out, but realistically, a TSLA pickup wouldn't be practical for me with the amount of long distance driving I do.

Added reply in a thread F1 World Championship 2019 11/17/2019 9:39 PM

Apparently not

Added reply in a thread MX track insurance? 11/17/2019 1:29 PM

If you don't carry insurance you;re asking to be bankrupted. Also, some insurers will require you to have EMS on site for practice days, and every one I've ever heard of requires on site EMS for races (going to cost at least $125/hr for an ALS ambulance), ... more »

Added reply in a thread Powder coating frame black ? 18 crf 450 11/17/2019 1:17 PM

If you do it get some clear vinyl to put over the spots where your boots rub it. Then when it starts looking like crap just get a heat gun, peel off the old, and put fresh on.

Added reply in a thread Dented cradle tubes 11/12/2019 10:07 AM

you'd need to heat the metal to the point where you change the grain structure and make it brittle in that area. after that, it's more likely to crack where the heat was applied

Added reply in a thread Longest lasting mousse 11/10/2019 9:04 AM

I'm running a Dunlop bib in my 450 GNCC bike. It's been through 2 tires, and it's getting pretty soft. I know plenty of people rinning Nitro Mousse that swear by them. It's like tires...one may hate Dunlop, and love Kenda, while another may love Maxxis, ... more »

Added reply in a thread Rm250 no spark 11/10/2019 8:59 AM

The troubleshooting procedure in the manual gives specific voltages for the coils, as well as resistance values. The white/blue to plug cap should be 13k-20k ohms resistance so you need to be on the 1k ohm range to properly check that If you don't have ... more »

Added reply in a thread The bathroom tile project. 11/4/2019 9:03 AM

sumdood, are there any shops near you that have optical scanning capability and a waterjet? if so you could potentially take all your fish shapes and have them scanned and have the tiles cut out to accomodate them. Unless you prefer the satisfaction ... more »

Added reply in a thread Yz 250 Tusk clutch kit ? 10/30/2019 11:17 AM

I used a tusk competition clutch kit with HD springs in a 250f with a built engine several years ago...did nothing but spin...the friction material wore off in hairs and clogged the oil pickup. Destroyed the engine. Never again will I run a Tusk clutch. ... more »

Added reply in a thread Steering stem problems... 10/28/2019 2:03 AM

Not only that, but did the OP tighten the bearing but under the top triple clamp properly?

Added reply in a thread 2019 crf450r starting issue plz help 10/28/2019 1:59 AM

Main fuse is probably blown. You'll find it with the starter relay

Added reply in a thread Easiest clutch lever to pull 10/23/2019 1:23 AM

Either that or ASV. ASV lever/perch changes the leverage ratio, and the adjustable lever allows you to put the lever wherever you like it

Added reply in a thread How do the pros get their tires to keep spinning so easily? 10/23/2019 1:21 AM

Why use a sealed chain when you get a new one put on every time you ride the bike? Definitely less parasitic drag with a solid roller chain though

Added reply in a thread Amsoil out, CBD in 10/23/2019 1:14 AM

If Feld is going to prohibit the display of other CBD companies' logo, then those slimeballs ought to pay base wage for the privateers. Or perhaps they should be sued for anticompetitive business practices.

Added reply in a thread 2019-2020 CRF 450 valve adjustments 10/22/2019 11:08 AM

I have a 2018 450RX...basically the same engine as the R. Adjusted 1 valve at 100 hours. The Honda valve train is pretty solid.

Added reply in a thread Crf 450 2019 10/21/2019 10:31 AM

I use a ASV clutch lever and perch. It makes the lever pull a bit lighter, and the adjustable lever allows you to put the engagement point exactly where it works best for you

Added reply in a thread CBD Sponser reason for no CR22 at all on MEC? 10/20/2019 12:33 PM

Lol... Keyboard warriors on Vital: Chad Reed is a tool, should retire, etc, blah, blah... Chad Reed: Puts together a privateer bike like 2 weeks before Monster Energy Cup, gets on the track with basically zero seat time, doesn't get a decent lap in qualifying, ... more »