Started new thread showa shock springs. 5/14/2017 5:45 PM

These were on my 2017 kx450, I've lost some weight and had to keep getting softer springs. should fit other bikes. 6.3kg race tech spring. blue in color has abut 15 hours on it. $65 5.8kg I think it was rcr brand. black in color has about 5 hours on ... more »

This forum thread has 3 replies

Added reply in a thread Kick a** two strokes! 3/31/2017 9:15 AM

This is my 04 rm i just refreshed. I completely rebuilt it a few years ago and It was starting to look pretty hammered.

... more »
Added reply in a thread Help ID'ing Possible Factory Pipe 3/25/2017 5:05 AM

In 2003 one of the guys I rode with a lot bought a new kx and Kawasaki was giving pc pipes with the purchase of the bike and If I remember his said lusk also.

Added reply in a thread Bill's Pipe YZ125, anybody use/used? 2/4/2017 10:43 PM

I cant speak on the yz pipe, but the bills I put on my rm 125 was noticeably faster than the fmf and pc I tried.

Added reply in a thread 2016 KX450 Anybody got one? 1/26/2017 1:01 PM

It was all stock on pump gas. It popped on decel all the time and ran lean in colder weather. Remap took all that away. Seems to start easier now also. well worth the $100.

Added reply in a thread 2016 KX450 Anybody got one? 1/26/2017 9:15 AM

My 17 needed remapped. It was detonating in colder weather. I sent it to Tokyo mods and had them do it. It's much better now, also it doesn't pop on deceleration anymore.

Added reply in a thread 16 Showa SFF TAC Fork 1/11/2017 5:46 PM

I have race tech revalve in my 17 kx and I'm running 175 inner,6 outer, and 173 balance. I weigh 250 lbs and I'm very happy with how they work. if the track starts getting rough I usually bump up the balance a couple psi and it makes it plusher.

Added reply in a thread Do newer YZF Pegs fit on 2-Stroke YZ 250? 11/29/2016 1:10 PM

Yea they fit. I have a set off a 2014 450 on my 07.

Added reply in a thread 2014 crf450r won't start 10/8/2016 8:24 AM

I had a friend that had his cam gear spin on the cam throwing it out of time. They spent a lot of time trying to get it running before realizing what happened, just something to check.

Added reply in a thread 16 KX450 rebuild, OEM or aftermarket 9/21/2016 7:15 PM

I had a 2010 kx450f and used oem pistons in it without any problems, the bottom end had 90 hours on it also with no problems. I just bought a new 2017 kxf and when rebuild time rolls around it will get oem parts. I think they fixed the piston cracking ... more »

Added reply in a thread Show Your RMZ450's 9/9/2016 6:30 PM

This was my 2014. I really loved this bike.
Added reply in a thread New Bike time 9/8/2016 9:09 AM

I just got a new kx last week. It is one of the best stock bikes I have ever ridden. I did ride a new Ktm and yzf and while they were very good bikes the Yamaha felt akward to me and the Ktm didn't impress me as much as I thought it was going to, maybe ... more »

Added reply in a thread trying to achieve 22mm offset 9/2/2016 7:02 PM

I put a set off a 10 yz450 on my yz 250, had to bore the top clamp 2mm and swap stems.

Started new thread Parting out 1980 cr 80 Elsinore. 8/4/2016 4:39 PM

Bought this bike for a project but it needs way more than I want to put into it. Most of it is original as far as I can tell except for a maier rear fender ,some hacked on silencer, and random hardware. Frame is junk and the cases have a hole in the

... more »

This forum thread has 3 replies

Added reply in a thread Any 200 pounder + 7/14/2016 9:13 AM

I'm about 245 in street clothes and have an 04 rm 144. I love riding it, the extra torque from the big bore helps a lot. Its worth having the suspension set up for your weight also.

Added reply in a thread Suzuki engine cases 5/2/2016 9:05 AM

Partzilla is the cheapest online oem retailer I have found.

Added reply in a thread rmz possible problem??? 3/21/2016 4:53 PM

No it only did it when it was running.

Added reply in a thread rmz possible problem??? 3/21/2016 9:08 AM

The connecting rod bearing went on my 14 at 50 hrs. It would still start up and run fine but made a chattering noise similar to that. There was lots of metal shavings in the screen and filter. I would drain the oil and see what it looks like. I know ... more »

Added reply in a thread Build my own swing arm bearing removal/installer 12/29/2015 1:06 PM

I use a peice of 1/2" all thread with a couple washers and nuts. Works like a charm and doesn't crush the bearing as easy as a vice does.

Added reply in a thread Tusk Wheels - Issues? 12/29/2015 12:59 PM

I have 60 hours on a set and they've held up awesome. I know of a kid that broke a hub just like that on a set because he didn't check his sprocket bolts.