Added reply in a thread 16 Showa SFF TAC Fork 1/11/2017 5:46 PM

I have race tech revalve in my 17 kx and I'm running 175 inner,6 outer, and 173 balance. I weigh 250 lbs and I'm very happy with how they work. if the track starts getting rough I usually bump up the balance a couple psi and it makes it plusher.

Added reply in a thread Do newer YZF Pegs fit on 2-Stroke YZ 250? 11/29/2016 1:10 PM

Yea they fit. I have a set off a 2014 450 on my 07.

Added reply in a thread 2014 crf450r won't start 10/8/2016 8:24 AM

I had a friend that had his cam gear spin on the cam throwing it out of time. They spent a lot of time trying to get it running before realizing what happened, just something to check.

Added reply in a thread 16 KX450 rebuild, OEM or aftermarket 9/21/2016 7:15 PM

I had a 2010 kx450f and used oem pistons in it without any problems, the bottom end had 90 hours on it also with no problems. I just bought a new 2017 kxf and when rebuild time rolls around it will get oem parts. I think they fixed the piston cracking ... more »

Added reply in a thread Show Your RMZ450's 9/9/2016 6:30 PM

This was my 2014. I really loved this bike.
Added reply in a thread New Bike time 9/8/2016 9:09 AM

I just got a new kx last week. It is one of the best stock bikes I have ever ridden. I did ride a new Ktm and yzf and while they were very good bikes the Yamaha felt akward to me and the Ktm didn't impress me as much as I thought it was going to, maybe ... more »

Added reply in a thread trying to achieve 22mm offset 9/2/2016 7:02 PM

I put a set off a 10 yz450 on my yz 250, had to bore the top clamp 2mm and swap stems.

Started new thread Parting out 1980 cr 80 Elsinore. 8/4/2016 4:39 PM

Bought this bike for a project but it needs way more than I want to put into it. Most of it is original as far as I can tell except for a maier rear fender ,some hacked on silencer, and random hardware. Frame is junk and the cases have a hole in the

... more »

This forum thread has 3 replies

Added reply in a thread Any 200 pounder + 7/14/2016 9:13 AM

I'm about 245 in street clothes and have an 04 rm 144. I love riding it, the extra torque from the big bore helps a lot. Its worth having the suspension set up for your weight also.

Added reply in a thread Suzuki engine cases 5/2/2016 9:05 AM

Partzilla is the cheapest online oem retailer I have found.

Added reply in a thread rmz possible problem??? 3/21/2016 4:53 PM

No it only did it when it was running.

Added reply in a thread rmz possible problem??? 3/21/2016 9:08 AM

The connecting rod bearing went on my 14 at 50 hrs. It would still start up and run fine but made a chattering noise similar to that. There was lots of metal shavings in the screen and filter. I would drain the oil and see what it looks like. I know ... more »

Added reply in a thread Build my own swing arm bearing removal/installer 12/29/2015 1:06 PM

I use a peice of 1/2" all thread with a couple washers and nuts. Works like a charm and doesn't crush the bearing as easy as a vice does.

Added reply in a thread Tusk Wheels - Issues? 12/29/2015 12:59 PM

I have 60 hours on a set and they've held up awesome. I know of a kid that broke a hub just like that on a set because he didn't check his sprocket bolts.

Added reply in a thread 2014 rmz450 rebuild hours? 12/14/2015 1:21 PM

The big rod end bearing on the crank went out of my 14 at around 60 hours. I wouldn't go over 75 without at least pulling it apart and check everything out.

Added reply in a thread looking for a 2005 rm 125 shock 11/28/2015 10:51 AM

I have suspension off an 06 rm 125 that was just valved and springed for a 150lb rider if your interested. I would wanna sell the forks with it.

Added reply in a thread Rm 125 Triple Clamps? 11/17/2015 9:24 AM

I have a universal top clamp off my 04 with the oversize mounts I'll sell you.

Added reply in a thread Mount a 2005 rm 125 rear brake caliper on a 2004 rm 125? 10/12/2015 2:48 PM

The bike was kind of a basket case when I got it, I never rode it with the 04 stuff. The 06 mounting bracket slid right onto the swingarm.

Added reply in a thread Mount a 2005 rm 125 rear brake caliper on a 2004 rm 125? 10/12/2015 2:20 PM

I bought the complete rear brake system off ebay from an 06 and put it on.

Added reply in a thread Mount a 2005 rm 125 rear brake caliper on a 2004 rm 125? 10/12/2015 9:18 AM

It'll work, I have one off an 06 on my 04.