Added reply in a thread 04 rm125 rebuild 9/14/2020 1:38 PM

Parts starting to show up for my next build. Anyone with some trick yz125 parts for sale let me know what you have. I’m looking for anything carbon and if someone has a new rtech kit they are not using I would be interested.

Added reply in a thread 2004 RM 125 Rebuild 9/14/2020 10:45 AM

I just did a 04 I love these bikes.

Added reply in a thread 04 rm125 rebuild 9/13/2020 7:31 PM

Still need to do some final touches. Modifying the seat currently and I’m still waiting on a jd Cdi that procircuit had in their old stock. I didn’t use the carbon engine covers on this motor I have a 06 bottom end that I’m going to match to this cylinder

... more »
Added reply in a thread WTB RM125 Carbon Bills can 9/12/2020 7:55 PM

Did you contact them direct? I talked to them 3 weeks ago and they had one

Added reply in a thread Bleeding brakes? 9/12/2020 3:51 PM

I’m going to take you guys step by step what I’m doing. Fill syringe with fluid. Connect syringe to bleeder valve, open bleeder valve with cap off master and pump fluid in until master is full. Close bleeder valve, pump lever. If I don’t have desired ... more »

Added reply in a thread Bleeding brakes? 9/12/2020 3:31 PM

Shouldn’t they retract then if I open the bleeder and let some out?

Added reply in a thread 04 rm125 rebuild 9/12/2020 1:52 PM

Good what got me started rebuilding this thing was I needed more top and over rev. Hopefully I achieve the curve I’m looking for. I went with the dep shorty and I have a bud carbon silencer as well. I considered hgs but with no experience with them on ... more »

Added reply in a thread Bleeding brakes? 9/12/2020 11:08 AM

Got it yea the syringe didn’t make anything easier you still have to bleed them.

Added reply in a thread 04 rm125 rebuild 9/12/2020 10:10 AM

Working on getting the lectron to fit better. I got a new Oem intake boot and took the rad valve off and it fit a little better but not how I would like. It binds the air boot up a little so after a little research I think I may put the rad valve back ... more »

Added reply in a thread 04 rm125 rebuild 9/12/2020 10:02 AM

Update motor is done an bolted up! Wheels are on as well!

... more »
Started new thread Bleeding brakes? 9/12/2020 9:43 AM

I have new everything on a 04 rm125. I rebuilt the front caliper replaced all hardware and pistons and same thing with the master cylinder. The pads and rotor are new as well. I used the Pryme Mx tool to bleed the brakes it’s a syringe with a line that ... more »

This forum thread has 8 replies

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 10:24 AM

Are you having issues getting the hpi?

Added reply in a thread Pirelli Mid soft tire set 8/29/2020 4:00 AM

I’m interested I need a 80/100-21 front and 100/90-19 rear if you have that combination?

Added reply in a thread 04 rm125 rebuild 8/29/2020 3:31 AM

Thanks that’s good information. Was the 05 profile slimmer?

Added reply in a thread 2020 YZ250 smoker dream build full send :-D 8/28/2020 8:43 PM

Is the rtech stuff lighter than stock?

Added reply in a thread Hard chrome plating transmission 8/28/2020 4:03 PM

I have tried that as well and do agree it does feel smoother. I am told hard chrome would increase hardness I’m wondering if you would get that same smooth effect you get from the isf process. I’m also curious if it would prolong life. I haven’t heard ... more »

Started new thread Hard chrome plating transmission 8/28/2020 3:15 PM

From what I have read it seems like this would be a great option for a serious racer? I’m curious if anyone has done it or has any insight on it. Thanks

This forum thread has 10 replies

Added reply in a thread 04 rm125 rebuild 8/27/2020 3:45 PM

As long as my tires show up by the weekend I can finish this think! I do have to do some work to the seat. I ordered a complete motoseat and its great fits perfect but I hate the seat foam. It’s not as flat and just looks taller although it’s not their ... more »

Added reply in a thread 04 rm125 rebuild 8/27/2020 3:23 PM

I love the look of these clamps. They except the 2020 plastics with no brackets and the angle of the front plate is right.

It wasn’t easy finding rainbow ti with the right size head for the front caliper but I found some and they ... more »
Added reply in a thread 2006 KX 250 restyle kit, were to buy ? 8/27/2020 6:22 AM

You made them for Jon?