Added reply in a thread Where to find bolt Size/Lengths? 4/25/2020 3:38 PM

So on my 04 rm125 the upper subframe is m8x100, upper shock is m10x65, the two lower subframe bolts are m8x25, one of the linkage bolts is m12x83, the other linkage bolt is m12x100, the longer t bolt on the linkage is m12x112 I will get the lower shock ... more »

Added reply in a thread Where to find bolt Size/Lengths? 4/25/2020 7:10 AM

Is it for your rm? If so what bolts?

Added reply in a thread Iso rm250 seat 4/7/2020 3:45 AM

I have one with a brand new motoseat cover already installed it’s black with white ribs

Added reply in a thread ISO rm125 2005-07/ rm250 04-08 triple clamps 4/2/2020 10:00 AM

If you don’t have one yet I have one with stem and bar mounts it’s off an 05 rm125 but I used it on a 04

Added reply in a thread ISO: 04-07 Suzuki RM125 complete motor 4/2/2020 9:50 AM

Pmd back

Added reply in a thread 2004 rm125 build 4/2/2020 3:43 AM

I will post up more tonight when I get more done. I’m modifying or renewing everything on this build so I hope it turns out good!

Added reply in a thread 2004 rm125 build 4/2/2020 3:39 AM

Some Kashima color anodizing. I originally polished these but maintaining raw aluminum to stay looking new is a lot of work so I decided to get everything anodized.

Added reply in a thread 2004 rm125 build 4/2/2020 3:33 AM

As you can see in the photo I did the sight glass delete mod on the master cylinder.

Added reply in a thread 2004 rm125 build 4/2/2020 3:32 AM

Some cerakote

... more »
Started new thread 2004 rm125 build 4/2/2020 3:29 AM

Fresh powder coat

This forum thread has 5 replies

Added reply in a thread ISO: 04-07 Suzuki RM125 complete motor 4/2/2020 2:52 AM

I have a set of 05 cases in good shape I have some other bottom end parts as well. I also have a 04 top end it’s a 134 kit ported for mid to top and head is cut for race gas. Eric Gorr did the top end work.

Added reply in a thread Anyone want to swap RM swingarms? 3/31/2020 5:51 PM

Is that tank clear anodized or anything or straight raw aluminum?

Added reply in a thread Anyone want to swap RM swingarms? 3/31/2020 4:26 PM

I have been wondering if the swap would work also. I know the swingarms are different but do you know if the 04 caliper will still work on the newer swingarm? I know the rear caliper is different from 04 to 05. I did not compare them side by side but ... more »

Started new thread Engine pros please help 3/12/2020 8:35 PM

I have had a 125 motor with all brand new parts bolted up, with the holes taped off and the entire thing wrapped in shrink wrap sitting on my shelf in my garage for about 6 months. Everything was lubed and I coated the cylinder walls lightly with oil. ... more »

This forum thread has 6 replies

Added a comment to motardchris's bike check 3/12/2020 3:25 PM
2002 RM250 2020 refresh

This setup has 12 comments.

Added reply in a thread RM125/250 and RMZ Parts for sale 3/5/2020 5:21 AM

What year rm clamps are they?

Started new thread Psf2 vs sff air 3/3/2020 7:40 PM

I’m swapping them onto a rm125. Do you think one would work better then the other after being set up for the lighter bike?

This forum thread has 4 replies

Added reply in a thread Garage sale! Suzuki items 2/18/2020 2:30 PM

Can you post a picture of the 2016 rmz stock clamps

Added reply in a thread YZ250 YZ125 Carbon Fiber seat base group buy 2/18/2020 3:21 AM

Hey if he’s having trouble with staples tell him to try a crown stapler with heavy duty staples they have them in 1/4 and up lengths and they are much thicker than your normal heavy duty air staples. I don’t have anything carbon to try it on but I’m ... more »

Added reply in a thread Swingarm repair help! 2/15/2020 8:08 AM

Yea no side to side play. I have to use a lot of strength to get the bearing in or out but I have never had any bearing be able to go in by hand. It being extremely cold in my garage wouldn’t have anything to do with it would it? I know bearings shrink ... more »