ecmx274

ecmx274

Lives in: Thurmont, MD USA

Member since: 12/09/19

Recent Activity Filter:

Added reply in a thread Cylinder bore measuring? 4/30/2020 11:36 AM

it’s brand new never been bolted on a bike. I’m assuming it will end up being an a piston but figured I should check anyway. I guess I will be purchasing a bore gauge can’t hurt to have for future measuring as well. Thanks for the help

Started new thread Cylinder bore measuring? 4/30/2020 9:52 AM

I have a brand new 05 rm125 cylinder. Manual says to measure perpendicular to crank 17mm down. I don’t have a bore gauge so I’m using a telescopic gauge and measuring it with micrometer. I have measured it about 10 times and get 53.96 almost every time. ... more »

This forum thread has 6 replies

Started new thread ISO/wtb 2005 rm125 triple clamps apllied/factory/ride 4/29/2020 4:22 PM

Looking for triple clamps that fit 05 rm125. Im not looking for a certain brand just something in good shape.

This forum thread has 2 replies

Started new thread What is the best way to fix this? 4/27/2020 2:42 PM

Does it need cut off and a new piece made and welded on? Can I fill it with weld and grind it smooth? Would using a brazing rod instead of weld be a bad idea? Is it fine as is? It’s not wore through yet. How would you guys fix it?

This forum thread has 6 replies

Added reply in a thread Where to find bolt Size/Lengths? 4/25/2020 3:45 PM

Just measured the lower shock t bolt it is m10x44. I have never been able to find the t bolts is stainless but mettec sells them in ti. If you look under cr125 on mettecs website you can get the right size t bolts I don’t know why they don’t list them ... more »

Added reply in a thread Where to find bolt Size/Lengths? 4/25/2020 3:38 PM

So on my 04 rm125 the upper subframe is m8x100, upper shock is m10x65, the two lower subframe bolts are m8x25, one of the linkage bolts is m12x83, the other linkage bolt is m12x100, the longer t bolt on the linkage is m12x112 I will get the lower shock ... more »

Added reply in a thread Where to find bolt Size/Lengths? 4/25/2020 7:10 AM

Is it for your rm? If so what bolts?

Added reply in a thread Iso rm250 seat 4/7/2020 3:45 AM

I have one with a brand new motoseat cover already installed it’s black with white ribs

Added reply in a thread ISO rm125 2005-07/ rm250 04-08 triple clamps 4/2/2020 10:00 AM

If you don’t have one yet I have one with stem and bar mounts it’s off an 05 rm125 but I used it on a 04

Added reply in a thread ISO: 04-07 Suzuki RM125 complete motor 4/2/2020 9:50 AM

Pmd back

Added reply in a thread 2004 rm125 build 4/2/2020 3:43 AM

I will post up more tonight when I get more done. I’m modifying or renewing everything on this build so I hope it turns out good!

Added reply in a thread 2004 rm125 build 4/2/2020 3:39 AM

Some Kashima color anodizing. I originally polished these but maintaining raw aluminum to stay looking new is a lot of work so I decided to get everything anodized.

Added reply in a thread 2004 rm125 build 4/2/2020 3:33 AM

As you can see in the photo I did the sight glass delete mod on the master cylinder.

Added reply in a thread 2004 rm125 build 4/2/2020 3:32 AM

Some cerakote

... more »

Started new thread 2004 rm125 build 4/2/2020 3:29 AM

Fresh powder coat

This forum thread has 5 replies

Added reply in a thread ISO: 04-07 Suzuki RM125 complete motor 4/2/2020 2:52 AM

I have a set of 05 cases in good shape I have some other bottom end parts as well. I also have a 04 top end it’s a 134 kit ported for mid to top and head is cut for race gas. Eric Gorr did the top end work.

Added reply in a thread Anyone want to swap RM swingarms? 3/31/2020 5:51 PM

Is that tank clear anodized or anything or straight raw aluminum?

Added reply in a thread Anyone want to swap RM swingarms? 3/31/2020 4:26 PM

I have been wondering if the swap would work also. I know the swingarms are different but do you know if the 04 caliper will still work on the newer swingarm? I know the rear caliper is different from 04 to 05. I did not compare them side by side but ... more »

Started new thread Engine pros please help 3/12/2020 8:35 PM

I have had a 125 motor with all brand new parts bolted up, with the holes taped off and the entire thing wrapped in shrink wrap sitting on my shelf in my garage for about 6 months. Everything was lubed and I coated the cylinder walls lightly with oil. ... more »

This forum thread has 6 replies

Added a comment to motardchris's bike check 3/12/2020 3:25 PM
2002 RM250 2020 refresh

This setup has 12 comments.