Added reply in a thread Delet 8/1/2020 9:01 PM

Yes I was using the same forks. What year rm250?

Added reply in a thread 2003 kx125 triple clamps 8/1/2020 4:25 PM

I just checked applied they have them applied race.com

Added reply in a thread 2003 kx125 triple clamps 8/1/2020 4:21 PM

You may be able to have emig racing make you a set. They make them for other brands. You can try topar racing as well. Applied racing or ride engineering doesn’t make them any more?

Added reply in a thread 04 rm125 rebuild 8/1/2020 10:41 AM

Seat showed up I went with a complete seat from Moto seat.

Added reply in a thread 04 rm125 rebuild 8/1/2020 9:36 AM

Front master rebuilt! I had to bolt the lever up I wanted to see how the rubber guard looked over stock. Also got my glide plate I feel is a must on a rm125.

... more »
Added reply in a thread 2006 YZ250F Part Out 7/31/2020 5:14 PM

How much do you want for the shock?

Added reply in a thread Delet 7/31/2020 4:31 PM

So I did get new calipers I have 53 top and 58 bottom

Added reply in a thread Delet 7/31/2020 2:35 PM

If those measurements seem off please let me know my calipers may need replaced.

Added reply in a thread 04 rm125 rebuild 7/30/2020 7:28 PM

Thanks and I got them from fast metric

Added reply in a thread Delet 7/30/2020 4:02 PM

So I measured them up and came up with 54.5 on the top holes and 58.8 on the bottom holes.

Added reply in a thread 04 rm125 rebuild 7/30/2020 3:30 PM

I’m stuck on what i should do with the wheels. I don’t know if I want to go with gold or black rims and I think I have decided on hann hubs but not sure on color yet. I am keeping the stock wheels for spares.

Added reply in a thread 04 rm125 rebuild 7/30/2020 3:26 PM

I had icw weld the seams on my radiators and make sure they were straight with no leaks. He does great work and has really fast turn around

new galfer rotors I got a great deal off another vital member! Not sure if I will use the front ... more »
Added reply in a thread 04 rm125 rebuild 7/30/2020 1:42 PM

More

Added reply in a thread 04 rm125 rebuild 7/30/2020 5:49 AM

So I sent the bottom end out to be rebuilt months ago and the builder I sent it to never touched it so I had him send it back. I should have done it myself but at the time I did not have time and I need this done by September so I sent it to a local ... more »

Added reply in a thread 04 rm125 rebuild 7/30/2020 4:25 AM

Close up of the rear master! You can see I used some ti bolts in some areas as

Added reply in a thread 04 rm125 rebuild 7/30/2020 4:19 AM

I went with the nickel plated bolts for the engine.

Added reply in a thread 04 rm125 rebuild 7/30/2020 4:16 AM

This is where I’m at now with it. There’s a few things i may change. The mud flap is new but I have a carbon one on the way so that will be swapped out. I may get some ti pegs as

Added reply in a thread 04 rm125 rebuild 7/30/2020 3:55 AM

Started bolting stuff up. The shock turned out great. Racetech resprung/revalved it and anodized the shock body. I had the smaller parts of the shock anodized blue to match the spring. I had some new ims ss pegs laying around so I bolted those on with

... more »
Added reply in a thread 04 rm125 rebuild 7/30/2020 3:37 AM

More parts!

... more »
Added reply in a thread 04 rm125 rebuild 7/29/2020 6:46 PM

Excited to try out a lectron I have never had one till now!