Added reply in a thread Suspension and triple clamp gurus please help! 7/4/2020 5:15 PM

Yea unfortunately I think it’s a design flaw and they use the same stem for multiple bikes but I haven’t been able to get ahold of bud France to find out. I’m to the point I’m just going to buy some different clamps. I can’t use my stock stem because ... more »

Added reply in a thread Suspension and triple clamp gurus please help! 7/3/2020 6:12 AM

So I still have not heard anything from bud France. I had a spacer made but I am unsure if it will work. Everything is tight now no gaps. My concern is when I tighten the spanner nut down it locks the nut so the stem turns inside the nut. Should the

... more »
Added reply in a thread Scammers Mdanny 6/29/2020 6:03 PM

This has been going on for awhile he used to try the same scam under a different name I think it was Peter Crebassa. He had a Nigerian PayPal account.

Added reply in a thread Titanium Questions - RaceTech Titanium 6/25/2020 4:53 PM

They really are great. They made me a custom part and I had it within two weeks. Pricing was extremely fair. Thanks Racetech titanium

Added reply in a thread Deglazing cylinder 6/24/2020 4:32 AM

It is but I’m not trying to remove material so couldn’t I get away with what kB said or do I still need a diamond hone just to deglaze?

Started new thread Deglazing cylinder 6/23/2020 3:10 PM

How are most of you deglazing your cylinders? Are you using a 320 grit flex hone on a drill? Are you doing it by hand? Is it risky to use a drill?

This forum thread has 10 replies

Added reply in a thread RM 2 stroke brake pedal fitment 6/14/2020 4:02 PM

The as3 one is great! I have used them on several bikes and it’s all I buy these days. Have one on my rm right now and love it. Shipping is fast from as3 I ordered one when the covid stuff was in full effect and it took less than 2 weeks to get to Maryland. ... more »

Added reply in a thread 2002 rm125 dampner help 6/14/2020 2:31 PM

Do you have a pic I may know where you can get some if it’s what I think your talking about?

Added reply in a thread Are Rm125 Rear brakes interchangeable 6/3/2020 12:55 PM

No it’s not a direct bolt on. You might be able to convert it by using the same year swingarm linkage an so on but I’m not sure if that would even work you would have to check measurements of every part.

Started new thread 2001-2008 rm125 wheels 6/2/2020 6:22 AM

Have a set of wheels off a 05 rm125 with powder coated stock hubs and warp 9 rims. The front tire is brand new and rear is almost brand new. New tubes rim tape and rim locks as well. The rims are old but do work good and all spokes are tight. I had the

... more »

This forum thread has 1 reply

Added reply in a thread 2004 RM “Corona” build - updated 11/1 5/28/2020 3:20 AM

Interesting info. Thanks

Added reply in a thread 2004 RM “Corona” build - updated 11/1 5/27/2020 7:12 PM

Why wouldn’t the 05 work? I’m just curious because when you buy a prox or hot rods they use the same crank from 04 on.

Added reply in a thread Works kyb shock rm250 pichon. $975 5/25/2020 12:29 PM

What year did he run this shock?

Added reply in a thread Suspension and triple clamp gurus please help! 5/22/2020 9:19 AM

Thank you I was about to press it flush. I am waiting to here from bud. I agree on getting the correct parts. I was trying everything I could To make sure it’s not my wrong doing. Bearings and seals are now right. The only thing it can be now is the ... more »

Added reply in a thread Suspension and triple clamp gurus please help! 5/22/2020 9:11 AM

The stem is only pressed into the clamp about 1mm to far so yes it would close the gap up by 1mm. Still leaves about 3mm of a gap. I measured it and the stem is close to 10mm longer. The stock stem will not fit the top clamp so I can not use the stock ... more »

Added reply in a thread Suspension and triple clamp gurus please help! 5/22/2020 5:26 AM

Bud pressed it in. It looks like its about 1mm to far I’m going to press it flush see if it fixes it. I think with the mm and a new nut it may be right. This spanner nut was in bad shape and they were on back order so I had it polished and anodized at ... more »

Added reply in a thread Suspension and triple clamp gurus please help! 5/22/2020 4:46 AM

So I did receive the new bearings and seals last night. Top bearing and seal was different and it solved the issue of the spanner nut tightening down. It did not solve the space from the top clamp to the spanner nut though. It did make the space only

... more »
Added reply in a thread Mikuni 38 off 04 rm125 5/22/2020 3:46 AM

180 but if I’m off my rocker make an offer.

Added reply in a thread Racetech motor work 5/20/2020 4:04 PM

What bike is it?

Added reply in a thread Mikuni 38 off 04 rm125 5/20/2020 3:54 PM

... more »