dazza2's Forum Activity

New thread Suzuki rm 125 porting 5/30/2019 10:44 AM

just want some opinions on my cylinder i bought this bike a while ago and told it was ported im not a 100% what im looking at it does look like its had some grinding done so i thought i would get some pics while i

ts apart see what anyone thinks ... more »

This forum thread has 30 replies.

Reply to Looking for hinson clutch parts for suzuki rm125 5/17/2017 11:54 PM

cheers mate ill keep that in mind if I have no luck with the other stuff I have found somewhere that supposedly has them in stock so will be interesting to see if they do or if its just a mistake on the website

Reply to Looking for hinson clutch parts for suzuki rm125 5/16/2017 11:26 PM

I had a feeling that the case does anyone know if somebody makes any comparable parts

New thread Looking for hinson clutch parts for suzuki rm125 5/16/2017 12:52 PM

Probably a long shot but looking for good used hinson clutch parts for my late model suzuki rm 125 im after the inner clutch hub and pressure plate leave a comment if you have any of those for sale would appreciated

This forum thread has 5 replies.

Reply to 08 suzuki rm 125 squish help 1/24/2017 11:21 AM

Thanks I will order one of them while ordering some service parts I come across these random markings on the cylinder just wondered if would be an insight into who did the cylinder work or who it belonged to as I was told it was a factory cylinder or

... more »
Reply to 08 suzuki rm 125 squish help 1/21/2017 10:55 AM

Just checked the plug it say ngk r7376-10 is this the correct one

Reply to 08 suzuki rm 125 squish help 1/21/2017 8:17 AM

lol yeah thats fair I would like to work on my own bike myself in future as much as possible It did have a B piston in it and the new one is a B also my brother said he knows someone who can check the bore for me hes a car mechanic so hes pretty helpful ... more »

Reply to 08 suzuki rm 125 squish help 1/20/2017 11:18 AM

hi thanks for the advice I will look into that when I change the piston next but the shop fitted the piston that is in there now so I would hope that they put the correct size in there

Reply to 08 suzuki rm 125 squish help 1/19/2017 2:11 AM

also thanks to everyone who helped

Reply to 08 suzuki rm 125 squish help 1/19/2017 2:07 AM

hi everyone quick update finally got the bike to the mechanics have been a bit busy lately with other non bike related stuff so I have roughly 2 possibly 3 more hours on the same piston that has blow by on it before getting it to the garage they have ... more »

Reply to 08 suzuki rm 125 squish help 11/7/2016 11:55 AM

I will double check the plug next time I get the bike out im pretty sure its the right one I wouldn't dare run the incorrect have read about that I will talk to the garage about the cylinder when I get it booked in haven't had chance to get it in shop ... more »

Reply to 08 suzuki rm 125 squish help 11/7/2016 11:49 AM

Thanks for the advice ive I managed to find the handbook surprisingly easy I will have a read when I get chance I will give the av fuel a try probably try something like 60% premium pump fuel 40 av see if it works if doesn't then I will bite the bullet ... more »

Reply to 08 suzuki rm 125 squish help 11/6/2016 8:49 AM

hi thanks for the advice I have to admit im starting to get a bit confused with the whole squish thing at first I thought if you have it too tight then you will get detonation then I thought if its too big it causes detonation im going to try and do ... more »

Reply to 08 suzuki rm 125 squish help 11/1/2016 1:19 PM

hi thanks for the help will look into them but just out interest does any part of my setup so far sound like it could be the cause ie squish ignition or anything else that I failed to mention also what would the signs of a possible air leak be not saying ... more »

Reply to 08 suzuki rm 125 squish help 10/27/2016 2:23 AM

Thanks for the replys kott0n my piston are getting blow by at low hours and some detonation on the previous one there is some faint scrape marks on the new one think I may have been a tad lean when it was at a sand track running rock oil synthesis 2 ... more »

Reply to 08 suzuki rm 125 squish help 10/26/2016 10:58 AM

managed to get round to measuring my squish today it measured 0.90mm which is roughly 0.35" which is standard for vhm heads so has me wondering why im having piston problems if its not too tight squish and im running premium pump fuel anyone have any ... more »

Reply to anodising cast 10/20/2016 3:47 AM

hi I think for the hubs and engine cases in the colour your talking is called cerakoat its a different process to anodizing if im not mistaken but im no expert but I have seen hubs and cases in a almost bronze sort of colour that had been cerakoated ... more »

Reply to 08 suzuki rm 125 squish help 10/17/2016 12:25 PM

ive ordered some 1.5mm rosin core lead solder now seems to be what everyone else is using from what I have read just got to wait for that to turn up also looking at the vhm heads that mine has and the domes squish say 0.90mm 0.039" so will be interesting ... more »

Reply to 08 suzuki rm 125 squish help 10/16/2016 10:24 AM

what thickness solder and what type of solder do you use for a 125 personal preferences I did read it should be rosin core i can get 1.6mm thickness in that if thats any help on what I have read if its correct info

Reply to 08 suzuki rm 125 squish help 10/14/2016 3:45 AM

Thanks for the advice yeah im from the UK ive been using v power nitro + as there's a station just down the road from me so hopefully can stick with that safely I think I will try and set it to what has been and see how it feels on the track and if its ... more »