dazza2's Forum Activity

Reply to purpose of the cut out in the side of 2 stroke piston 6/20/2019 1:35 PM

so its only a weight thing then wonder why wiseco didn't bother with them i borrowed my friends scales so i could compare weight of wiseco and vertex i didn't think it was too bad considering its forged vs cast

... more »
Reply to Suzuki rm 125 porting 6/20/2019 1:29 PM

thanks for the input psr i remember you saying they done yours when i had problems last time i tried another place just because they are closer to me i will try gibbs at a later date

Reply to purpose of the cut out in the side of 2 stroke piston 6/18/2019 7:06 AM

cheers for the response not sure i follow what do you mean by mixture i have emailed wiseco to see what they say but no response yet

Reply to Suzuki rm 125 porting 6/18/2019 12:10 AM

thanks for the reply im going to get it all back together this time around then maybe next time try and find someone to send it to i did email a company here in the uk but they didn't seem keen as someone else has done work to it which is fair enough ... more »

New thread purpose of the cut out in the side of 2 stroke piston 6/17/2019 12:45 PM

just bought a new piston and it doesn't have the cut out like the other one does anyone the purpose of this what difference does it make

... more »

This forum thread has 7 replies.

Reply to Suzuki rm 125 porting 6/17/2019 5:28 AM

hi thanks for the reply i will look into that its not too bad to ride but compared to the kx its completely different my measurements may not be the most acurate i probably wont dig too deep into whats been done this time around just want to get it up ... more »

Reply to Suzuki rm 125 porting 6/11/2019 2:33 PM

power valves out at the moment not a 100% sure if its had any work though

... more »
Reply to Suzuki rm 125 porting 6/11/2019 9:48 AM

Reply to Suzuki rm 125 porting 6/11/2019 9:46 AM

Reply to Suzuki rm 125 porting 6/11/2019 9:44 AM

Reply to Suzuki rm 125 porting 6/11/2019 9:43 AM

Reply to Suzuki rm 125 porting 6/11/2019 9:42 AM

so i re measured it and i think its more like 27

... more »
Reply to Suzuki rm 125 porting 6/10/2019 2:45 PM

I've measured the exhaust port height with the calipers it wasnt as easy as i had hoped i used the step measurement and done it a few times it came out about 28. some low digit it wasnt the most accurate i also tried it with a tape measure and got about ... more »

Reply to Suzuki rm 125 porting 6/9/2019 10:38 AM

its 08 same as 07 it definitely seemed like a more top end motor last time i rode it especially compared to my 98 kx 125 which is the polar opposite to the rm ill measure the exhaust port height tomorrow

Reply to Suzuki rm 125 porting 6/8/2019 9:47 AM

thanks for all the relplys i will check on monday with the calipers and see if it has been raised or not do you know what sort of effect raising the exhaust port will have where does it move the power too any info would be appreciated

Reply to Suzuki rm 125 porting 6/4/2019 1:55 AM

thanks for the info thats the sort of feedback i was looking for had me a bit concerned when it got called rough as long as it useable ill leave it as is for now maybe send to someone in the future Thanks

Reply to Suzuki rm 125 porting 6/4/2019 12:39 AM

bumping this back up would still like a bit of feedback if its a good or bad job and the reason why

Reply to Suzuki rm 125 porting 5/31/2019 12:16 AM

does it not look like its a very good job then the pictures aren't the best the lighting makes it look a bit patchy

Reply to Suzuki rm 125 porting 5/30/2019 1:44 PM

thanks for the confirmation nice to know i didnt get miss sold

Reply to Suzuki rm 125 porting 5/30/2019 10:47 AM

... more »