Added reply in a thread 08 suzuki rm 125 squish help 10/14/2016 12:22 AM

awesome thanks I have been watching some youtube videos on how to measure it but do you or anyone have any tips/advice on doing it taht may help would be appreciated Thanks Darren

Started new thread 08 suzuki rm 125 squish help 10/13/2016 11:15 AM

hi so I started a thread about why my suzuki rm pistons keep getting blow by im on my second piston with about 3 hours on it and Its starting to get blow by already so I put pics up and some of the old piston a few things were sugested one thing was ... more »

This forum thread has 30 replies

Added reply in a thread rm 125 piston problem maybe 10/13/2016 4:25 AM

ah ok then I will stick with what I have been doing to avoid confusing myself does anyone what the squish should be so that I can run premium pump fuel

Added reply in a thread rm 125 piston problem maybe 10/13/2016 1:02 AM

so one thing I have just found out is suzuki recommend 30 /1 I have been using 32 / 1 would this be the cause of my problems and if I start using 30 / 1 would I have any jetting issues

Added reply in a thread rm 125 piston problem maybe 10/12/2016 4:01 AM

I didn't think of that I just assumed that most top of the line oils would do the same job I will look into the other stuff and see what the mechanic says about that and see if they have any experience with rock oil may consider a change . thanks

Added reply in a thread rm 125 piston problem maybe 10/12/2016 12:49 AM

hi thanks for the reply guys the piston has roughly 3 hours on it fuel ive been using is 99 or 100 octane I believe is the same as your 93 over there I think ours is research octane number jetting is fairly close to stock it was running lean on the pilot ... more »

Added reply in a thread rm 125 piston problem maybe 10/11/2016 3:06 PM

What I should ad is the bike is running 32 to 1 v power nitro + unleaded from petrol station rock oil fully synthetic jetting is 37.5 pilot jd jetting needle red 3rd clip 360 main just under 2 turns out it was quite hot weather when I last rode this ... more »

Added reply in a thread rm 125 piston problem maybe 10/11/2016 2:27 PM

so just had a look at the old piston and doing some reading up on it has me pretty paranoid now I will post pics of old piston to what anyone else thinks but from what ive read is it would possibly be caused by the bike running hot or possibly lean

... more »
Added reply in a thread rm 125 piston problem maybe 10/11/2016 2:07 AM

Thanks that would actually make sense as thats what he said might have caused my other piston to go I just didn't think of that as I just assumed it was all good after he had changed the piston I will post up if i find out if its that that caused it ... more »

Added reply in a thread rm 125 piston problem maybe 10/10/2016 1:31 PM

hi thanks for the quick reply I assume so to there quite a reputable family run business I will keep an eye on it then and if it gets any worse ill will give them a call if you think its not too bad there seems be a slight scratch on as well any idea ... more »

Started new thread rm 125 piston problem maybe 10/10/2016 12:14 PM

hi new here usually post on mxtrax as im in the UK but site seems to have a problem with pop ups quite new to motocross don't race just been to practice tracks and doing a bit of woods riding type stuff to get used to the bike so my problem is ive just

... more »

This forum thread has 16 replies