dang472's Forum Activity

New thread KX65 clutch help 9/7/2021 10:57 AM

I’m kinda stumped with a clutch disengagement problem on my kid’s KX65. I’ve probably rebuilt over 40 of these motors since 2001 but I’ve never had an issue with the clutch not disengaging completely. I originally used a new Pro-x clutch kit and filed ... more »

This forum thread has 2 replies.

New thread Looking for .46 and 5.3 F/R springs for Showa TC 8/27/2021 7:48 PM

I’m looking for springs for my 2005 RM125. 47mm Twin Chamber forks and stock shock. CR and early CRFs are the same. Need .46s for the fork and 5.3 or 5.4 for the shock. Email is dang472@hotmail.com

This forum thread has 0 replies.

New thread KX65 factory rebuilds X2 8/17/2021 12:08 PM

I recently finished up 1 of the 2 KX65s I’ve been restoring over the last few years. I picked one up as a barn fresh 2002 with a locked up crank. The other was a basket case 2003 with a bad crank and cylinder. Frames, swingarm, and rims got powder coated

... more »

This forum thread has 14 replies.

New thread Looking for 05-07 RM125 exhaust valve 7/31/2021 10:31 AM

Hey, I’ve got a new cylinder that needs the entire exhaust valve setup. Let me know what you have laying around. Thanks, Dan

This forum thread has 1 replies.

New thread Longshot: American Suzuki employee contact 7/7/2021 7:48 AM

I know this is a longshot, but does anybody have contact info for Suzuki Offroad’s tech Kevin Macahilig? He’s the only name referenced in the 2019 RMZ/RM125 aluminum frame conversion and I’d like to ask him a few questions. The SwapMotoLive article made ... more »

This forum thread has 0 replies.

New thread Custom front sprocket offset work? 7/6/2021 6:22 AM

Hey, I’m looking for a custom countershaft sprocket for my 2005 RM125. I need one with a 140 thousandths offset towards the outside to make an aluminum frame conversion work. Basically mill that offset from the face of the sprocket and add it to the ... more »

This forum thread has 2 replies.

New thread FC red metallic shock springs 5/17/2021 2:29 PM

Does anybody know where a stash of Factory Connection red metallic shock springs are? I’m looking for probably a 5.2/5.4 for a 05 RM125. Thanks, Dan

This forum thread has 1 replies.

New thread Contrary to the news..(Malcolm) 4/28/2021 2:24 PM

I’m not sure if it was mentioned in the race thread, but the crowd reaction for Malcolm’s podium should remind everyone things aren’t as bad as the news wants you to believe. It seems like every story tries to divide us nowadays but we had a French guy/Japanese ... more »

This forum thread has 100 replies.

New thread WTB: 04-07 RM125 bottom end/complete engine 4/22/2021 7:39 AM

I’m looking for a bottom end, preferably one needing a new crank. Email at dang472@hotmail.com

This forum thread has 10 replies.

New thread 2019-20 RMZ JGR suspension link help 4/4/2021 5:57 AM

I bought a JGR link for my 2020 RMZ250 chassis but the link to too small for my frame. I’m not sure if it was supposed to come with thicker spacers or it’s the wrong model.

... more »

This forum thread has 6 replies.

New thread Ride Engineering 2018-2025 RMZ triple clamps A-kit 3/21/2021 8:15 AM

I’m selling a set of blue Ride Engineering 22mm offset clamps bored for Showa A-kit. Bar mounts not included. My email is dang472@hotmail.com. Asking $350 shipped to conus.

... more »

This forum thread has 10 replies.

New thread Anyone have an old RMZ fuel pump laying around? 3/15/2021 6:12 AM

I’m looking for a broken/old/unwanted RMZ fuel pump. I’m in the process of throwing a 125 engine into a RMZ chassis and am needing a way to plug the bottom of the fuel tank and mount a petcock. I know I can have a plate made but would like to see if ... more »

This forum thread has 1 replies.

New thread Any Scalvini dealers here? 1/22/2021 2:17 PM

I’m looking for a couple full sets. Please email me dang472@hotmail.com Thanks, Dan

This forum thread has 4 replies.

New thread WTB 18-21 RMZ suspension 1/20/2021 7:25 AM

I’m putting some feelers out for a set of newer RMZ suspension. I’d prefer the 2019 250 shock. I’m not opposed to kit stuff but I feel like the stock forks are close to my old A-kit on my 2 strokes minus coatings. Thanks, Dan

This forum thread has 12 replies.

New thread Free/Pay it Forward....Christmas Time CRF50 plastic 12/10/2020 7:34 AM

I thought I’d offer up this set of blue plastic for a Honda CRF50 and clones to someone. It’s the typical $90 eBay set that my kid used for half the year. A few scuffs and bubbles but I’d rather give it away to someone that might need it.

This forum thread has 0 replies.

New thread WTB KLX110L Midwest area 10/6/2020 10:25 AM

I know the market is crazy for 110s right now but just checking if anyone has a decent up for sale within 6hrs of Northern Illinois.

This forum thread has 4 replies.

New thread Looking for 2019-up RMZ250 rolling chassis 7/29/2020 12:09 PM

It might be a long shot but I see people parting out newer bikes on here all the time. It can even be just the hard parts such as frame, swingarm, subframe, airbox, etc. Thanks, Dan

This forum thread has 12 replies.

New thread Looking for a new OEM KX65 exhaust 5/5/2020 5:43 AM

I’m hoping someone has a new OEM take off pipe for a KX65. I don’t need the silencer, just the pipe. Ideally I need 2.

This forum thread has 0 replies.

New thread Looking for KX65 parts 4/18/2020 12:40 PM

I’m doing 2 frame up rebuilds on a couple 03 KX65s. New parts preferred such as chains, sprockets, handlebars, exhausts, etc.

This forum thread has 2 replies.

New thread ISO/WTB Suzuki RM Showa A-kit fork lugs 49mm 3/5/2020 3:54 PM

Looking for a set of fork lugs. I’m hoping someone has a set laying around, condition isn’t a huge deal. Most of the kit forks for sale are for the RMZ and I’d really like to keep my wheel sets the same for my RMs. My 2-strokes are 04-07 but the thought ... more »

This forum thread has 0 replies.