bowens971's Forum Activity

Reply to Cheyenne Harmon practice crash 4/5/2019 9:16 AM

That was a nasty crash, luckily he did get up briefly after hitting the ground. threw it sideways and the bike locked up in the air. Watching him ride I was thinking to myself “man I hope that bike doesn’t float a valve” the entire time, lots of revs. ... more »

Reply to Troy Lee Designs 12/8/2018 5:42 PM

I used Alias the first two years of its release, been TLD since then. Always have had good luck with their gear.
Reply to 2009 CRF450 running issue, HELP! 10/6/2018 5:09 PM

Yes I’ve played with the idle a lot, if I set it absurdally high it will keep it going. I unfortunately don’t have a setup to test the TPS, seems odd that it would get out of wack halfway through a ride though. I’m considering the ECU as a possible cause. ... more »

Reply to 2009 CRF450 running issue, HELP! 10/6/2018 12:43 PM

https://youtu.be/nRIl9BYCqho

New thread 2009 CRF450 running issue, HELP! 10/6/2018 12:41 PM

I have a 2009 CRF450 that started having a running issue halfway through my ride the other day. The bike runs amazing on the gas, as soon as I let off it completely goes dead. I suspected a fuel pump, put in a new one and I have the same issue. The bike ... more »

This forum thread has 6 replies.

Reply to Seattle SX - Night Show Discussion 4/7/2018 8:56 PM

So cringey. It would be great if they’d just do away with that bit for all involved.

Reply to How many of you ride with plates and screws? 12/7/2017 12:42 PM

I’ve got a plate on my left clavicle and a plate on my left femur. The collar bone will give me trouble with most roost guards and neck braces are an absolute no go due to damaged nerves (3 breaks, on the second plate now). The leg doesn’t even give ... more »

Reply to Best gear company for tall riders? 11/23/2017 5:26 PM

I’m 6’4” as well. I’ve never had a set of gear that I felt was too short, though my preference had been TLD and Alias.

Reply to ISO-- 2015-2016 KX250F PARTS 11/16/2017 3:27 PM

Dubya wheelset featuring Talon carbon hubs, Excel A60 hoops, Excel spline drive spokes. $1500 obo. Like new condition

New thread 06+ KXF Dubya wheelset Talon carbon hubs, Excel A60 hoops 11/16/2017 3:25 PM

For sale is a perfect condition wheelset from Dubya. Talon brown carbon hubs, Excel A60 hoops, Excel spline drive spokes, Braking 270mm front rotor, Braking rear rotor, Renthal sprocket, Dunlop MX3S tires. The wheels have five rides only. These will ... more »

This forum thread has 3 replies.

Reply to 2002 CR250 build 10/3/2017 7:47 PM

Galvan takes care of me though I will say that the retail number he gave was $2500 with valving done and everything replaced. The down time is pretty lengthy on the Kashima so plan ahead. Plans to ride the bike stock are now out the window. My good friend ... more »

Reply to 2002 CR250 build 10/2/2017 8:32 PM

Thank you I appreciate that. I absolutely cannot stand plated two stroke pipes, I'm working on stripping the paint off the stocker until I get a freebie Pro Circuit refurbished. It's all personal preference!

Reply to 2002 CR250 build 10/2/2017 8:59 AM

After several months the suspension is back on the bike! I still have a few more things to do before it's ready for the track but I couldn't resist a couple pictures. I will get better pictures soon, but for now here's these.

... more »
Reply to 2002 CR125 Build *Complete* 10/1/2017 6:38 AM

A trick I learned from long time team green mechanic Jeff Chambers, use Muriatic Acid on that cylinder. It will take the aluminum deposit and marks right off.

Reply to 2002 CR250 build 9/30/2017 5:52 PM

The 02 crank has a tin casing around it, from what I've read it's come apart in some cases. The 07 crank drops right in and solves any of those problems. If I recall it's weighted differently as well. All of my knowledge on the subject has come from ... more »

Reply to 2002 CR250 build 9/30/2017 10:46 AM

A couple pictures from Galvan (@evo412 on instagram)

... more »
Reply to 2002 CR250 build 9/30/2017 9:26 AM

I'm going to put some time on it as is so that I will appreciate it more. When the time comes for a new piston I plan to have the cylinder and head worked over. So far I can't complain about the power, not near as much hit as the KTM 300 kit I had on ... more »

New thread 2002 CR250 build 9/30/2017 7:11 AM

I'm horrible at remembering to take process pictures but anyhow, I came up with this extremely clean CR250 a few months ago. I've always loved the look of the third gen CR's so this was perfect. I traded my heavily used 05 YZ125 straight across for this

... more »

This forum thread has 21 replies.