Added reply in a thread 100 percent Armega Goggle 5/20/2020 3:05 PM

I've had that happen on 2 pair, from roost... they were early production goggles. My new goggles have a thicker and shorter post. Haven't had an issue with the new versions. I have 4 pair, awesome goggle system, fit good with am Laett helmet.

Added reply in a thread Rm250 restyle kit or No? 4/14/2020 11:41 AM

Personally I really like the OE style and look of the last generation RM. I have my OE RC edition plastic with graphics. This look is clean and simple... just my .02

Added reply in a thread Post a picture of your Mountain Bikes 4/14/2020 10:55 AM

96 Schwinn S9Six with OEM Rockshox Quarda 21R.

Added reply in a thread 2006 RM250 pc pipe plus other parts , 2019 crf250 front caliper and brake line 4/9/2020 11:30 AM

Thanks... GLWS!

Added reply in a thread 2006 RM250 pc pipe plus other parts , 2019 crf250 front caliper and brake line 4/8/2020 1:36 PM

95240 besides the small dents, is it straight?

Added reply in a thread Motul 710 vs motul 800 3/13/2020 4:03 PM

I used 710 in my GasGas EC200 for enduros with no issues, jetted properly, I"m pretty sure it has a lower ash and combustion burn rate, so it burns pretty clean, but like any oil, jetting and correct mixture ratio is always smart. I currently use the ... more »

Added reply in a thread Where did you ride today? 3/7/2020 6:25 PM

The Oatfield

Added reply in a thread Long time MD Vital member in this pic 3/5/2020 3:52 PM

Looks like a train tracks in the back ground....Marysville? My memory of Hangtown was a bit more trees.......

Added bike check 2005 YZ125 2/20/2020 4:12 PM
2005 YZ125
Added reply in a thread Looking for a heart rate monitor 2/20/2020 9:03 AM

I use a Polar H10, chest strap, go ride practice sessions and down load when I get back to my vehicle. Haven't tried it yet mounted on my bar pad. So far.. super happy with how the device is working.

Added reply in a thread Moto XXX jerseys 2/17/2020 2:33 PM

The white vented jersey is awesome!

Added reply in a thread Im on a really tight parts budget for a 2015CRF250R, any suggestions for top end and clutch? 2/12/2020 3:48 PM

>>> https://oemcycle.com/ <<< Great prices on Pro-X parts!

Added reply in a thread Suzuki's With Gold (Yellow) Wheels 1/8/2020 3:45 PM

Did Troy turn them down? OEM hubs? Looks great!

Added reply in a thread All balls vs Pivot Works? 12/10/2019 2:56 PM

Neither... OEM or ProX, both Japanese quality.

Started new thread Nor. Cal 74 Honda 125 12/5/2019 12:42 PM

Not mine, I know that guy! Looks pretty decent https://sacramento.craigslist.org/mcy/7030926909.html

This forum thread has 1 reply

Added reply in a thread Yamaha yz 2 stroke talon hubs 11/4/2019 10:20 AM

Depending on the Talon part number, with other spacers they can fit older models as well. I have the older Talon hubs on my 05 YZ 125 and the rear required a different spacer to fit the newer bikes.

Added reply in a thread Glen Helen this Weekend? 10/30/2019 12:17 PM

The same 125 you rode this past weekend at DT1?

Added reply in a thread The Great Debate… PREMIX 10/29/2019 10:52 AM

2006 - RM 250 32/1 w/ 110 Sunoco Leaded Motul 800 2005 - YZ 125 32/1 w/ 110 Sunoco Leaded Motul 800

Added reply in a thread Ohlins suspension 10/15/2019 9:40 AM

What bike & year models does this this set fit?

Added a comment to FM851's bike check 10/14/2019 10:47 AM
New 2008 Suzuki RM 125 Factory Replica

sexy!

0 1 1

This setup has 8 comments.