Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/9/2020 2:36 PM

Seems like only solution. To bad, have like 4pcs of OEM stock bar. Not sure if there is a bar that is as low as 68-69mm.

Added reply in a thread Xtrig Rocs and Xtrig PHDS on SXF450 2019-21 = 10mm higher bar? 8/9/2020 2:34 PM

Fuck that sucks. Really hate the stock bar mounts/clamps, just twist when you lay bike over.

Added reply in a thread K-tech spring cartridges 8/9/2020 2:33 PM

Just the single one for WP AER. Heavy as fuck, made bike very front end heavy. Could not ride with it. Went CV and also KYB and bike was much better balanced.

Added reply in a thread Xtrig Rocs and Xtrig PHDS on SXF450 2019-21 = 10mm higher bar? 8/8/2020 8:02 AM

Is your part numbers Xtrig Rocs (40505003) and Xtrig PHDS (50200001)?

Added reply in a thread Xtrig Rocs and Xtrig PHDS on SXF450 2019-21 = 10mm higher bar? 8/8/2020 8:01 AM

See below. When i did run it with PHDS and Rocs, i instantly felt bars was way higher. Went back to my factory clamp and stock bar mounts, height came back to normal when riding. Took the picture in the garage after the training today, so seem to get ... more »

Added reply in a thread Xtrig Rocs and Xtrig PHDS on SXF450 2019-21 = 10mm higher bar? 8/8/2020 7:59 AM

See picture. In the videos from Xtrig on Youtube, they mount the KTM with the fixed mount without spacer to get the right height i guess. But it also means, PHDS automatically raise the bar position?!

Seem maybe they have done this (user lower ... more »
Started new thread Xtrig Rocs and Xtrig PHDS on SXF450 2019-21 = 10mm higher bar? 8/8/2020 7:55 AM

Has anyone mounted this combo, and successfully gotten OEM height on the handlebar position?

This forum thread has 22 replies

Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/8/2020 7:17 AM

... more »
Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/8/2020 7:15 AM

So adding the xtrig PHDS to the xtrig clamp is 10mm higher than the fixed bar mounts from xtrig that has partnumber 50200001.  I dobt know if xtrig fixed mounts is intended to be -10mm with the fixed bar mounts "as is", or, if they intend that to compensate ... more »

Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/8/2020 6:43 AM

Problem found and fixed. It was two issues 1. Cartridge on KYB fork had some threads visible, so partly lose 2. Xtrig Rocs triple clamp do NOT have the same total height on the bike as the OEM factory triple clamp. About 5mm difference which if i rememer ... more »

Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/6/2020 6:54 AM

It feels like front is high, similar feeling to turning rebound out 10-15 clicks. I have raced with shorter shock, longer linkage, revalved shock that works lower in the stroke and it does not feel like that. It just feel like the front end is raised ... more »

Added reply in a thread Sxf 450 2018 and 2020 suddenly front end high? 8/6/2020 12:52 AM

Im going to open up the fork and check, but issue is same with KYB fork +Trax shock as with OEM WP AER fork and OEM shock.

Started new thread Sxf 450 2018 and 2020 suddenly front end high? 8/5/2020 1:49 PM

Second time now I experience this. First on my 2018 sxf last year, 50h-ish. Did a moto, came back in all was fine. Cone valve and track shock. Went back out for second moto and suddenly front end is high, or rather feel like I have 10mm bar risers mounted. ... more »

This forum thread has 14 replies

Added reply in a thread KYB insert vs Cone Valve 7/18/2020 11:59 PM

I'm at 200lbs, 5.0 springs and 300 oil. 4mm preload.

Added reply in a thread traxx shock clicker settings 7/18/2020 2:00 PM

He will be in ballpark. I have not seen anyone go outside 35-40 on hsc, and 12-20 on rebound and ~10-22 on lsc on trax. No matter what valving. If he has to, valving is off and he will know that at least. If he have a hard time to determine what needs ... more »

Added reply in a thread traxx shock clicker settings 7/18/2020 10:37 AM

Closest to front of bike is hsc.

Added reply in a thread traxx shock clicker settings 7/18/2020 12:38 AM

38 17 17 on shock is a ok start. Fork, 16r 15c 0 preload. That is in ballpark and will not be more than a few clicks off.

Added reply in a thread Do we really want parity? 7/18/2020 12:36 AM

45min would be so fucking boring. Shorten to 25+2 instead, or 20+20+20+1. Last 10 minutes of a 30+2 race is just a sleeper. If it was a bit shorter maybe someone could put up the tempo for a bit longer and challenge.

Added reply in a thread 2020 outdoors 6/23/2020 5:48 AM

I think Bagget will suffer from hands going numb. Armpump will be better with softer suspension, but numbness will be catastrophic when we are now talking about 35min instead of 20min, and outdoor with full revving bikes numbness will set in sooner rather ... more »

Added reply in a thread Strategy for 450 Final Race 6/18/2020 12:40 PM

AC, Bowers, Aray. Four points. End of story. Title is Tomac if kawi want it.