Zeke27G's Forum Activity

Reply to Source for NLA or obsolete clutch and break cables 9/15/2021 6:30 AM

Terry Cable will either have them in stock or they can make them custom and I feel they are much better quality than Motion Pro. http://www.terrycable.com/

Reply to MXerDW 9/1/2021 11:13 AM

Sending positive vibes Dwayne's way!! Be strong my friend!

New thread VINTAGE 26” MALCOLM SMITH MS RACING MTB 8/30/2021 7:30 AM

Searched for one of these for years and unfortunately this frame size is too small for me. It’s a medium Pro Comp XT model and best for those under 6ft tall I’d say, unless you're just using it to cruise the pits? It’s ready to ride with a new sealed

... more »

This forum thread has 0 replies.

Reply to '12 KX450? 8/26/2021 5:41 AM

Would second all of the info above as I had a '12 KX450 as well and loved it. The only issue I had was with the cylinder temp sensor throwing a code and the fix was having Jonny Lightning in Corona, CA, installing some super high end German water-tight ... more »

Reply to KX500 Chassis Setup for motocross? 8/13/2021 5:30 AM

14-48 is what I run as well. Can't remember the triple clamp offset, but it was what Emig Racing recommended.

Reply to KX500 Chassis Setup for motocross? 8/12/2021 3:17 PM

2014 YZ250F KYB forks. Emig Racing lower triple clamp with custom Luxon Engineering upper triple clamp. Emig Racing dog bones. Frame and subframe gussets added throughout, plus mounts to accept KX450 foot pegs. 2 piece clutch cover mod. Moto ... more »
Reply to Just an FYI...Newmann Thread 8/12/2021 9:14 AM

From my interactions with him here and when I was in need of a PVL ignition for my '74 Yamaha MX360, he was always more than helpful and he had a great attitude. Rest easy Newmann.

Reply to 1989 125 and 500 Golden State Nationals from Carlsbad 8/10/2021 8:42 AM

Yes, and it was sponsored/hosted by XTREME.

Reply to Tough weekend for New England motorsports.... RIP #24 and #24 8/10/2021 8:27 AM

Years ago when Pete24 posted photos of his '89 KX inspired graphics on his KX450, I had to do the same with my '12 KX450. Fast forward to my recent 2003 KX500 build, and it also has '89 KX500 graphics. Pete was an inspiration and from my interactions ... more »

Reply to Jett & Hunter Lawrence SHRED a CR500 Two-Stroke! 7/28/2021 8:25 AM

Definitely seemed like Hunter was having a good time on the ol' 500! And regarding the incorrect answer to Jett's question about Johnny O' riding "dual shock" bikes:

Reply to Art For Petrolheads “Beware” 7/26/2021 7:40 AM

Had no idea Cousin Eddie was so talented. Good luck with the refund!

Reply to Let's see/review those 2019 kx450s 7/19/2021 12:46 PM

So radical!! Had a '93 KX125 and loved that bike. Did you consider having the fork tubes anodized blue?!
Reply to Jo Shimoda quietly flying the PC Flag 7/13/2021 6:11 AM

Reply to What is AP wearing? 7/3/2021 8:36 AM

THOR stands for “Torsten Hallman Original Racewear”. Do some research on Torsten Hallman aka Mr. Motocross and you’ll soon learn he’s a hero and legend of our beloved sport.

Regarding the gear in question, THOR came out with a 70’s throwback ... more »
Reply to Mis-matched triple clamp colors 6/25/2021 5:50 AM

A photo would speak volumes, but it could be that one clamp is cast aluminum and the other is machined. Or it could also be that one clamp was polished before anodizing and the other was left with the rough machine finish. And yes, it could also be a

... more »
Reply to Moto Memorabilia 6/24/2021 8:25 PM

Very cool!

Reply to Question for those who wear the 6D ATR-2. 6/23/2021 9:45 PM

Very happy with my ATR-2’s, I’m on my 3rd currently and I think their fit is great on my Elvis sized XL dome!

Reply to Recommended coolers 6/23/2021 9:20 AM

Had one...used it til' the wheels fell off.

Reply to Recommended coolers 6/23/2021 5:29 AM

Figure you might enjoy a little YETI humor...here's and oldie but a goodie! https://www.instagram.com/tv/B1H1XjKhpdv/?utm_source=ig_web_copy_link