Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 5:27 PM

I don’t think so But here’s some more photos, all these where taken long time ago, the bike is running new piston since then for about 40 hours. It is just starting to feel like little slower and lacking compression that was one of the triggers to this

... more »
Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 3:49 PM

Ok, 20-30 hours will be from now on What about the exhaust bridge? Should I do something with it? In the photos stock vs big bore, you can see the difference

... more »
Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 3:30 PM

It is make sense that it comes from the exhaust bridge becaus this point located just in front of it This is exactly what i asked initially Maybe should I sand it little with fine sand paper 1500+? or maybe even diamond paper?

Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 1:32 PM

Well this is Eric Gorr kit... I wanted my CR to be a gnarly weapon and he did very good job with it My bike fells very good and have lot of torque from idle, too bad he have no double ring set up

Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 11:58 AM

If so, why the surface of the piston that come in touch with the piston bridge seems to get more friction It can’t reduce compression and piston “life”?

Added reply in a thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/18/2019 11:54 AM

How many “too many hours”? This piston was taken off after 68 hours as for preventative maintenance, not because of lack of performance. The service manual says every 7.5 hours if i am not wrong but it refers to pro guy that race and taking a factor ... more »

Started new thread CR125 big bored to 144cc has marks on the exhaust bridge (photo) 3/17/2019 10:57 PM

Hi, i have a Honda CR125R 2007 With big bore that done by known workshop in US, on the first rebuild I’ve seen that the exhaust bridge is not polished good but i am not sure if it came that way So, before i am paying for shipping to US (i live in Israel)

... more »

This forum thread has 31 replies

Added reply in a thread WP 4CS Conversion to KYB SSS 2/11/2019 12:04 PM

Did you check if you can put KYB sss internals in Showa TAC forks first? Is this conversion can work?

Added reply in a thread 2016 KTM 450 (Craigslist scam) 1/12/2019 12:24 PM

Well you’re right, all sounds legit except the price lol... In Israel you can’t buy set of wheels for this bike in that price Here new 450 KTM’s go arround 75,000NIS, it is more than 20,000$ Each year of use is lost of 10% value

Added reply in a thread 2016 KTM 450 (Craigslist scam) 1/12/2019 9:57 AM

i dont get it, it is on craigslist but he wants payment thru ebay? i am not familiar with craigslist because i am an "oversea purchaser" and use ebay but if this scam has somthing to do with ebay i will be glad to know

Added reply in a thread brembo master cylinder 12/31/2018 7:37 AM

Either one of you still have the master cylinder?

Added reply in a thread Looking for CRF Lugs for Showa A kit 12/30/2018 11:07 PM

Well, i live in Israel so the only problem is that the shipping will double the price otherwise we where allready on paypal... Is it the old version with the bigger damping rod? I think it worth more than what you price it

Added reply in a thread Looking for CRF Lugs for Showa A kit 12/23/2018 11:53 PM

Well, it looks good but you can find complete forks for this price

Added reply in a thread Looking for CRF Lugs for Showa A kit 12/23/2018 1:56 PM

Thanks mate, i will go for any of A kit lugs as long as they’re not broken It will be nice to have the Honda one but i am open to offers

Started new thread Looking for CRF Lugs for Showa A kit 12/23/2018 11:53 AM

Hi, looking to get A kit lugs for Showa A kit 49mm dual spring fork Currently have RMZ lugs. Yotam21@gmail.com Thanks

This forum thread has 17 replies

Added reply in a thread Wanted: Cr 250 2007 aftermarket parts 12/14/2018 11:55 PM

i have applied triple clamps red color if interested 200$ shipped from Israel. i dont check messages here on vital so only Emails please yotam21@gmail.com

Added reply in a thread STIC Metering block Jetting 12/13/2018 1:40 PM

finally i maid it to dial in the jetting. the .115 tube is defiantly better set up. i ended up with 190, 52, 3rd clip blue marked JD jet kit needle for CR 1999 (parallel to CCK\CCL, see photos), 1 turn on the air screw.

the bike is running ... more »
Added reply in a thread ISO OEM Honda 2008 CRF450 triple clamps 12/9/2018 12:21 PM

Well, i took it off CRF250 2009 but i did not buy it new so I can’t tell what the previous owner did Thanks for the info and sorry for the miss understanding

Added reply in a thread ISO OEM Honda 2008 CRF450 triple clamps 12/9/2018 12:10 PM

I have oem Honda triple clamps for 47mm showa forks without steering stem. 50$ exclude shipping. And i have Applied triple clamps red color 200$ exclude Located in Israel Shipping should be around 30 - 50$ depends if you take it with bar mount and steering

... more »