Added reply in a thread Kx/kxf Technical Touch KYB fork w/ clamp- $1900 obo 7/1/2020 2:56 AM

Here, shoot me an email. Trevmorris85@gmail.com When I'm ready to buy, I'll hit you up. Figure the worst you can say is they are sold.

Added reply in a thread Kx/kxf Technical Touch KYB fork w/ clamp- $1900 obo 6/30/2020 11:49 PM

If you still have these in two weeks, I may snag them off you. Glws, those look primo πŸ‘

Added reply in a thread Star protesting Gieco for fuel 6/28/2020 11:36 PM

Sorry, I checked out after people got into a pissing match over religion. Any update on the fuel test?

Added reply in a thread Thursday after Supercross at Glen Helen 6/27/2020 11:38 AM

Sounds like a great day for riding, still bummed I didn't make it out. I will never understand why people trash talk Glen Helen. GH, along with Cahuiila, have always been my favorite tracks to ride. Glad you got to go out, first time at that place is ... more Β»

Added reply in a thread J law thread deleted 6/7/2020 3:08 AM

I doubt the mods axed it. Nobody was really trashing him or running their mouth. Most had good memories to share about the guy and just touched on how disappointed they were with the path he took, especially considering his talent.

Added reply in a thread Vet Regional, Riverside Raceway, and what to expect when you go to your regional- 6/6/2020 5:34 PM

Why not just buy a transponder to use at all races you enter? Or am I missing something?

Added reply in a thread GoPro Hero 8 Black 6/6/2020 5:20 PM

My advice, mount it on the helmet under the visor. My friend runs it this way and it's a fantastic POV.

Added reply in a thread Why did my Disappointed in Kenny get put in the Dumbdgeon?? 6/5/2020 7:48 PM

You aren't wrong. If Vital was Vegas, the Dumbgeon would be Fremont Street. It's where the real entertainment resides πŸ˜‚

Added reply in a thread Who knows of some good gun stocks? 5/31/2020 9:28 PM

I was legit going to post "Well, I use a McMillan A3 on my 700." πŸ˜‚

Added reply in a thread Companies who can scan and machine parts for CNC 5/31/2020 4:04 PM

Well, that sucks. Was hoping it'd be a grand or less. Thanks for the insight from you and everyone else here. Figured no harm in asking.

Added reply in a thread Companies who can scan and machine parts for CNC 5/30/2020 9:30 PM

I didn't even think about him. Thank you. Ideally, I'd love to go to a moto savy place and he probably forgets more in a day than I've learned in my life.

Added reply in a thread Companies who can scan and machine parts for CNC 5/30/2020 6:55 PM

Full honesty, I literally got them for the cool factor and it was cheaper than getting the machined KYB lugs that are on the kit forks. This is nothing more than me purely having my moment as a parts geek.

Added reply in a thread Companies who can scan and machine parts for CNC 5/30/2020 5:23 PM

That's the issue though. It's a works part that I don't have blueprints for and I figured scanning would be the most cost effective way to measure everything. I think he was speaking to 10+ hours of actual CNC time. I don't see an ignition cover being ... more Β»

Added reply in a thread Fitting KYB shock onto 2018 & 2020 kx450 5/30/2020 5:18 PM

So if I upgrade to a newer frame, better off just selling it with the bike?

Added reply in a thread Fitting KYB shock onto 2018 & 2020 kx450 5/30/2020 12:31 PM

Oh nice. I figured there wasn't any difference from '08 or '09 up to '18. So sounds like I'll be ok with my current ride once the shock arrives. Still curious about the '19 and '20 models. I shouldn't have ridden one 😭

Added reply in a thread 2020 yz450f or factory edition ktm 450 sxf? 5/30/2020 11:15 AM

Yikes, $9k plus taxes for the Yami? I would've ran away, too. Sounds like you made the right decision. That thing is gorgeous πŸ‘πŸ‘πŸ‘

Added reply in a thread Companies who can scan and machine parts for CNC 5/30/2020 11:12 AM

Honestly, for some factory lugs replicated it'd be worth it to me. But yeah, that seems way too high to justify for an ignition cover.

Added reply in a thread Fitting KYB shock onto 2018 & 2020 kx450 5/30/2020 10:46 AM

Preferably, with as little modification as possible. I can't find them but I remember seeing threads on the prior gen bikes. Haven't seen anything pop up for them on the newer bikes though.

Started new thread Companies who can scan and machine parts for CNC 5/30/2020 10:11 AM

Anyone know of any reputatable companies who offer services to 3d scan parts for CNC'ing? Looking to have some fork lugs and an ignition cover made.

This forum thread has 30 replies

Started new thread Fitting KYB shock onto 2018 & 2020 kx450 5/30/2020 10:01 AM

What needs to be done to fit a kyb shock from a 2009 kx450 to a 2018 kx450f, and also a 2020? Currently have an '18, but may upgrade to a newer model and want to keep my suspension. Thanks, gang πŸ‘

This forum thread has 10 replies