Added reply in a thread 2019 KTM 150sx questions 5/27/2020 9:06 AM

We have a 2019 SX 150 and had the same issue's with the forks getting it set up for my son. Leave the air pressure up around 120 psi. Drop the oil height in each fork to 160 ml. Back the comp clicker all the way out. That was a huge improvement. From ... more »

Added reply in a thread SXF 250 2017 stock shock spring length 5/25/2020 8:46 AM

The first number is the spring rate = 42 NM. The second number is the free spring length = 247mm. Looks like you need a new suspension supplier.

Added reply in a thread KTM SX125 does not want to rev out proper unloaded 5/19/2020 5:47 PM

Pull the power valve covers off and run the bike. That should give you an idea if the PV is working properly.

Added reply in a thread KTM master cylinder piston stuck 5/19/2020 5:45 PM

You could try blowing compressed air into the MC form the line side. Wear safety glasses.

Added reply in a thread 2019 125SX High Compression Head or Get KTM 150 kit 5/18/2020 6:10 PM

Wrong year. OP is asking about 2019 XC tanks. 2016 - 2018 come complete with gas cap, 2019 comes complete except for the gas cap. 2018 and earlier XC tanks do not fit on the 2019-20 SX 150.

Added reply in a thread 2019 125SX High Compression Head or Get KTM 150 kit 5/17/2020 11:59 AM

For what year OEM?

Added reply in a thread 2019 125SX High Compression Head or Get KTM 150 kit 5/17/2020 8:21 AM

Hey Chuck, no new plastic or seat for the XC tank, bolts right on other than the gas cap and a shorter fuel line. I did all the Jarvis mods - drain bolt holes, drilled out baffle holes, crimped over flow tube and filed slide. We are at elevation 4000 ... more »

Added reply in a thread 2019 125SX High Compression Head or Get KTM 150 kit 5/16/2020 9:26 PM

No flywheel weight but I built this for my son who is racing Pro XC/HS. We have the bike working very well offroad, Bud carbon muffler, raised compression, blue PV spring, JD jet block kit, Jarvis mods, 5.25 slide, JD needle, opened up the air box. He ... more »

Added reply in a thread 2019 125SX High Compression Head or Get KTM 150 kit 5/16/2020 8:32 PM

Built a 2019 XC 150 from a 2019 SX 150, a 2019 XC 250 tank fits perfect.You will need a different gas cap for the XC tank.

Added reply in a thread Anyone ever shined their carbon helmet? 5/11/2020 6:32 PM

You could try SC1 detailer.

Added reply in a thread ZRT throttle tube 5/11/2020 10:51 AM

I would need the Bark Buster version ZRT offers - it is $322 CND. That is bonkers.

Added reply in a thread Looks like Beta is about to Release a/an MX Model/s 5/10/2020 4:33 PM

click the arrow on the photo, there is a 2nd photo.

Added reply in a thread Cracked axle block. Rideable? 5/9/2020 5:46 PM

I would not ride it, if it fails it will throw the wheel out of alignment and could possibly derail the chain that could pile up at the cases. If you turn the adjuster bolts in then flip the axle blocks 180 I would ride it like that.

Added reply in a thread KTM 19-20 SX/F Big Bikes Subframe setup 5/1/2020 9:23 AM

JT is correct. I would not cut more than 10mm out of the subframe. As well as exhaust fitment issue's you will also have issue's with the air boot. In the past when I have removed 10mm on older KTM's the air boot was made of a much softer rubber, so ... more »

Added reply in a thread Oversized fuel tank for 2020 250sx??? 4/30/2020 5:50 PM

2019 XC 250 gas tank will fit. We used this tank on a SX150 and it works perfect. XC tank requires a different gas cap and a shorter supply hose. Picked up the XC tank from my local KTM dealer.

Added reply in a thread Interesting release from Factory One Sherco 4/28/2020 8:15 PM

Besides his out spoken criticisms of Sherco in his RacerX interview, another piece of this puzzle that no one knows about, is around the first week in January he grenaded a Sherco 2 stroke and 4 stroke.

Added reply in a thread Canadian MX - Inside X Talk Show 4/26/2020 9:47 AM

Have you heard anything recently on the Pro Nationals Mav ? With the announcement last week by the Alberta Government, the earliest they will be racing in Alberta is Sept 1st.

Added reply in a thread pwk air striker vs oem mikuni 4/20/2020 8:12 PM

Yes there is a difference between the older CR Mikuni's and the one's showing up on the KTM/Husky. The Jet block is a different design between the two.You have to remove the Jet block to see this.

Added reply in a thread New GASGAS pics? 2/27/2020 1:48 PM

Is it the clutch cover throwing you off ? KTM changed the Husky clutch covers and I believe that is what is happening here as well.

Added reply in a thread Nitro Mousse 2/27/2020 12:13 PM

Poke a hole in the tape and hit it with the compressor. After the bead seats plug the hole with a little silicone sealant.