Wink's Forum Activity

Reply to Perch Mounted Handguards 2/18/2021 4:50 AM

We run magura clutch and brembo brake on YZ450FX and run Husky white handguards, hydraulic clutch is a must have

Reply to WTB Showa damper mount for KTM 12/17/2020 6:44 PM

Mount sold but have damper $150 shipped in the US

Reply to WTB Showa damper mount for KTM 12/14/2020 4:45 AM

Yes $100 shipped, I’m in NC, also have Showa damper if interested

Reply to Help with ktm plz! 11/4/2020 8:23 PM

No concern here, the 250 and 350 will occasionally develop a slight oil leak in this area, just remove the valve cover and put a bead of gasket maker in the U channel

Reply to Help with ktm plz! 11/4/2020 5:00 AM

That’s the cam chain tensioner plug, nothing to worry about, you can replace copper crush washer,, most folks replace the stock tensioner with dirt tricks tensioner, great investment ,, better than stock

Reply to Ktm front brake spongy after crash, Help! 9/26/2020 6:41 AM

I would put in a new plunger, the. leave master cylinder cap loose and pull lever towards the grip and zip tie it in the pulled in position ,, let sit overnight to get all air out of system

Reply to KTM Trax PDS shock excellent condition 9/4/2020 3:52 PM

Do you still have a pds shock

Reply to Ktm XC kickstand removed, what to fill hole with? 7/29/2020 4:47 AM

Clear silicone

Reply to FMF exhaust for KTM 150sx 7/27/2020 4:31 AM

Would you take $100 shipped to NC, zip 27021

Reply to FMF exhaust for KTM 150sx 7/26/2020 6:31 PM

Do you still have your VForce

Reply to Keihin 38mm Airstriker carb 6/28/2020 6:46 AM

I’m interested, where are you located, I’m in NC

Reply to 1981 YZ465 for sale, 6/21/2020 7:42 PM

I’m interested, can you send a pic

Reply to 2017 350 sxf part out 10/1/2019 1:21 PM

My email is wink_radford@comcast.com

Reply to 2017 350 sxf part out 10/1/2019 1:20 PM

I’ll take the radiators, how much shipped to zip 27021

Reply to 2017 350 sxf part out 9/24/2019 6:59 PM

Do you still have the radiators? If so are they in good shape ?

Reply to 2017 350 sxf part out 9/24/2019 6:53 PM

Do you still have the radiators? Are they in good shape?

Reply to 2017 350 sxf part out 8/31/2019 5:25 AM

I will take the radiators, how much?

Reply to Rubber wire ties and crimp style hose clamps 4/3/2019 4:32 AM

Sharing my KTM secret. The hose clamps are Pex clamps for home water piping, sold at Lowe’s or Home Depot, need Pex Crimp tool to crimp on, cost approx $60 in stores, I found good ones on amazon for $30

Reply to Rubber wire ties and crimp style hose clamps 4/3/2019 4:28 AM

Sharing my KTM secret. The hose clamps are Pex clamps for home water piping, sold at Lowe’s or Home Depot, need Pex Crimp tool to crimp on, cost approx $60 in stores, I found good ones on amazon for $30