Added reply in a thread WTB Cone valve or A kit for 2020 Ktm350 6/22/2020 6:57 AM

I have a freshly built set of KYBs if that's something up your alley. Custom KYB forks KTM/Husqvarna

Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 4/23/2020 5:31 PM

I have another set, black uppers, gold lower tubes. Please PM me.

Added reply in a thread Suzuki restyle kit or stock? 4/11/2020 6:43 PM

Added reply in a thread Suzuki restyle kit or stock? 4/11/2020 6:39 PM

It's a matter of taste. I am on the restyle bandwagon currently, but a clean, oem looking zook with rmz front fender/plate is a good looking bike also.

Added reply in a thread ISO cone valves 4/9/2020 5:26 PM

Hey, I have a set, was planning to post it up tomorrow. hit me up through message if that's something that might interest you.

... more »
Added reply in a thread 2005 Suzuki RM125 restyle rebuild 4/1/2020 1:40 PM

Added reply in a thread 2005 Suzuki RM125 restyle rebuild 4/1/2020 1:12 PM

... more »
Added reply in a thread 2005 Suzuki RM125 restyle rebuild 4/1/2020 1:08 PM

... more »
Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 4/1/2020 1:00 PM

A couple of small nicks from roost on the upper, other than that the forks are perfect. DLC is flawless, all threads intact, lugs in decent shape.

... more »
Added reply in a thread 2005 Suzuki RM125 restyle rebuild 3/31/2020 5:31 PM

Shock showed up. It is a KXF shock but I've used KXF shocks in the past on my RMs (WP trax an Ohlins) so I cannot see a reason why this one wouldn't fit. Any experiences with fox podium RC3 shocks?

Added reply in a thread 2005 Suzuki RM125 restyle rebuild 3/31/2020 5:27 PM

Forks:

Added reply in a thread 2005 Suzuki RM125 restyle rebuild 3/31/2020 5:23 PM

Custom steering

Added reply in a thread 2005 Suzuki RM125 restyle rebuild 3/31/2020 5:21 PM

Hey mate, those are 2008 yzf 250 (or 450, can't remember) forks, which had the upper tubes replaced with a newer yamaha tubes (as I needed 54mm in the upper clamping area). This allowed me to use either RM axle and wheel (with one standard, and one shortened ... more »

Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 3/31/2020 6:23 AM

Shock is sold, thank you Matt! Forks are still available. 2700USD shipped

Added reply in a thread Anyone want to swap RM swingarms? 3/31/2020 6:02 AM

RM build - sweeet!!! Ryan, keep in mind 04 and 05+ swingarms are different on a 250 (05+ swingsrm is more rigid due to some added material), and I think 125 and 250 swingarms are a bit different too. I will check it later today and report back.

Added reply in a thread 2006+ RM250 20mm triple clamp offset experience 3/29/2020 2:41 PM

For SX it might make sense. For MX with stock 22.5 offset the bike is twitchy at high speeds already. I wouldn't want to sacrifice any more of the stability. Bike turns razor sharp with stock offset anyway IMO

Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 3/29/2020 2:30 PM

Hey mate, I can sell the shock separately, even though I would prefer to keep it as a set. 1400 Shipped for the shock seems like a fair deal?

Started new thread 2005 Suzuki RM125 restyle rebuild 3/28/2020 2:39 PM

So here it is. The bike is not yet finished - they never are. Fox rear shock coming next week. What makes it different from all other RMs - KYB SSS suspension up front, adapted from a Yamaha, I used Kawasaki triple clamps with RM stem. I made some new

smile
... more »

This forum thread has 12 replies

Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 3/28/2020 12:55 PM

Thanks mate, at this point 3 fast forward 3 months is just as unknown as the next week... Hopefully they will make someone happy soon!

Added reply in a thread WP Cone Valve forks KTM Husqvarna '16+ 3/26/2020 6:16 PM

Still available