Added reply in a thread Lets See Your Pitbike Builds! 1/16/2019 10:48 AM

Kx85 with custom wound springs for fat guys. Loudest in the pits with full pro circuit exh.

Added reply in a thread Are KTMs super unreliable? 1/11/2019 9:42 AM

I think that stigma got earned when they really did suck. The last 10 years they have obviously turned it around- but before that you were a fool to buy a ktm over any Japanese bike. Not only did they not work right but parts were 3X as much and they ... more »

Added reply in a thread Ufo flo green fenders 1996-2002 2003-2007 kx 125/250 1/3/2019 9:35 AM

Would have been worth a fortune last year lol

Added reply in a thread Kellerdienst exotica! '91 Husqvarna CR125 *It's running!* 12/14/2018 8:49 AM

Crush it- that will cost you 4000$ at least for it to run. No carb- motor most likely needs completely restored and you won’t be able to buy a single part for it. Thing is a parts bike at best

Added reply in a thread Tom Morgan YZ315 Stroker (Red Bull Straight Rhythm) 9/24/2018 10:42 PM

Is there any bind in the exhaust system? Is your subframe straight? I try and go over everything to make sure bolts just slide right in and nothing is pulling on anything or binding, the subframes get tweaked pretty easily and make the exhaust not line ... more »

Added reply in a thread Tom Morgan YZ315 Stroker (Red Bull Straight Rhythm) 9/24/2018 9:12 PM

I had an original turbine core and my exh. Gasket always annoyingly leaked even when wrapping with high quality teflon tape. Switched to an R304 PC silencer and that solved all my problems and runs better as well. I had to go up a size on my main jet ... more »

Added reply in a thread 1998 kx250 team green build (or 94?) 9/17/2018 10:31 PM

Nice, UFO is doing a limited run of flo green plastic for these bikes, get it while you can

Added reply in a thread Pro circuit ignition cover/ axle blocks yz250 9/17/2018 5:35 PM

I'll take the used one please, I'm In ca

Added reply in a thread Pro circuit ignition cover/ axle blocks yz250 9/17/2018 9:27 AM

I would like one, are the bolts included? I still have the stock Phillips head crap

Added reply in a thread 2013 ktm 250sxf/ warms up then shuts off! 9/8/2018 5:51 PM

Had those symptoms after chasing the problem for a while it turned out the rings were seized in the ring lands and lost compression when hot

Added reply in a thread Help finding 1996 KX purple plastic 8/29/2018 10:03 PM

2077309619 text is best. I have one oem one and a pair of acerbis

Added reply in a thread Help finding 1996 KX purple plastic 8/29/2018 10:01 PM

I have a set of fork gaurds

Added reply in a thread Is this 85 CR80 too far gone??? 8/25/2018 7:56 AM

Junk

Added reply in a thread WANTED: FORKS TO FIT 2004 YZ250 8/1/2018 8:35 AM

05 forks will require 05+ triple clamps and steering stop modification on an 04- best to do the Triple S forks if going that route

Added reply in a thread WANTED: FORKS TO FIT 2004 YZ250 7/31/2018 1:28 PM

I can ship them if you pay for it- I was looking for about ~200usd - I could include gytr triple clamps with no steering stem for the asking price

Added reply in a thread WANTED: FORKS TO FIT 2004 YZ250 7/31/2018 12:08 PM

I have a set setup for a 185 lb intermediate

Added reply in a thread Another 2004 KX125 rebuild? Yessir! 7/26/2018 2:24 PM

Drop it at a powder coater to have blasted and powdercoated, I think the common color used for swingarms is a BMW silver

Added reply in a thread Yamaha yz 125/250 2 stroke ohlins 05-18 7/22/2018 3:29 PM

How much for the five gallon bucket of mayonnaise?