Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/31/2020 6:51 AM

Yeah. I get it on a roll, make templates, trace them, stack them, and when I do graphics I just replace that piece too. I'm probably going to just make my own airbox all together out of aluminum and weld it in to my subframe on V2.0. Looks pretty good

... more »
Added reply in a thread Turn Two Tree 8/31/2020 6:12 AM

This is how fear became a virtue. If you're not afraid of what I'm afraid of, you're wrong, unsafe, and therefore a bad person according to my paradigm.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 3:57 PM

I made it.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 1:25 PM

Everything but linkage and axles is Ti. I was talked out of it by the Mettec guy. Said it's just not a good metal for those positions because of drivetrain shock. I think there's also an article on this website somewhere about it. Explains why when someone ... more »

Added reply in a thread Geico Leaving The Sport? 8/30/2020 1:16 PM

Maybe it's being looked at wrong and HRC is going to absorb the team and have one big Honda 450/250 team with Moto Concepts as the SX satellite team. Explains why Jeff and Christian bailed, and Dungey slid to straight HRC.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 12:39 PM

I got this nice 24x60" board, sanded it to about 600grit, rounded the front edge. Stained it with Danish oil over the course of about 3 days. I'm happy with how it came out.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 11:52 AM

Rear rotor was a pain. These were 220mm instead of the customary 240 they are now. The only company making them is Brembo, So I had to order a rotor from Italy. Cool thing is, if I feel like it, and I probably will, I'm just going to cut the brake hanger

... more »
Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 11:16 AM

I've sent Willy 9 emails over the course of 4 months. Fuck that guy. Just trying to buy a shelf product. I'm not going to beg someone to take my money. I'll just use another product, because at the end of the day the "product" is my ignition curve. Meaning, ... more »

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 8:45 AM

Is anyone a Vortex vendor? I need a CDI

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 4:11 AM

I like these clocking brake lines. Venhill UK. Ti banjo.

Using one of these kill clamp jobbies, not a weight weenie, didn't weight things on a little drug scale but the goal was to stay at 214 dry, with that big cylinder, crank, piston, pipe, ... more »
Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/30/2020 2:17 AM

The Yamaha won't be what I get hurt on. Going to do a Piranha 140 and build a small trailer for it, with a 35G water tank so I can cruise over to the spicket. I'm using the water tank as an excuse to tell myself that "it definitely needs 25hp and beadlocker

... more »
Added reply in a thread 2002 Honda CR250 Build 8/30/2020 2:09 AM

If you swap that 20 year old Taiwanese powervalve servo motor for a Japanese Mabuchi 365 "short can", those bikes run better. 2 wires. Solder.

Added reply in a thread 1986 Kawasaki KX80 8/29/2020 11:30 AM

wish Dave Miller could see it

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/29/2020 10:05 AM

Speaking of across the pond, check the thread title change and start connecting dots

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/29/2020 9:29 AM

I always wanted a fresh set of DID shoulderless wheels. Tracked a set down across the globe. Stainless Excel spokes, and alloy spline drive nips. Rim builders will advise against these because they're tedious compared to traditional nips. I will say

... more »
Added reply in a thread Does anyone have an all white KTM 250SXF? I’d like to see what it looks like. Comment or DM me on instagram @jones.421 8/29/2020 5:37 AM

Bud, To build bikes effectively, you have to be able to "see" it without asking for pics of it. That's the whole point.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/28/2020 4:18 PM

They are. That's the "more on that later". I'm deciding what I want to do there. Because they work, these are the one thing they seem to get right, but I am prob going to snag Mylers. Sortve place holders like the OEM pegs. Can't decide what pegs I want ... more »

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/28/2020 2:44 PM

This cylinder kit was NOS, everything unused, except the cyl itself came from a build that was floating around the internet...he had it dipped that fake carbon look paint shit. I rescued it and knocked the extra chromosome back off and it's unmolested.

... more »
Added reply in a thread 2020 YZ250 smoker dream build full send :-D 8/28/2020 1:07 PM

Just make an alloy tank.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 8/28/2020 11:55 AM

Thats my goal. If you know the hanger bolts to your fork leg that's step one. Accommodates a 270 rotor is step 2. Then just measure the distance between the two holes for.thw caliper sliders. One slider is on the hanger, ones on the caliper. Measure ... more »