Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/26/2020 3:29 PM

The best and worst twostrokes I've ever ridden were both RC Valve Hondas. One was stock, one was the full on Watts Perfections 02 RC package. Thing revved to the moon and beyond, made power the whole time, and really didn't have a wallop anywhere, a ... more »

Added reply in a thread WW Ranch - Timed Qualifying Bench Racing 9/26/2020 9:08 AM

Led to RCs elective knee clean up

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/26/2020 8:33 AM

Yes, the mounts are diff between 98-99. The swing arm diameter is different too. 99 goes to current. That's where the change is. 88-98 are the same mount points.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/26/2020 1:09 AM

I needed a laptop to tune it with. I could have spent 400 on a new Korean or Chinese Chromebook, but I decided to spend less, and get a ruggedized, somewhat period correct factory refurb Panasonic. The tuning program prob won't work well on a mobile/tablet

... more »
Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/26/2020 1:01 AM

No, I tested the G2 throttle on the KTM for G2. They had some different combos with different custom cables which are now shelf items. I.e. new style throttle with older PWK carb. Old style domino on Mikuni so you can use the quicker cam, ECT ECT. I ... more »

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/25/2020 1:26 PM

Raptor Apex Extreme RX003 Floorboards of Doom.

Added reply in a thread Stiffie Brand YZ250 in the works 9/25/2020 2:43 AM

If you run into any compatibility issues with 90s YZ part, I basically turned myself into Rainman in that regard. 246. Of course there's 4 on the floor.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/25/2020 2:39 AM

I can cut the mystery out if you want to just text him. It's an India phone number. Use WhatsApp.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/24/2020 5:55 AM

Dug these out. This is my gas tank in India. Tried to get the GMX guy in the UK to do it. He wouldn't take my work. "My books are full.". Well, ok. I'm glad he didn't. You can get a better look at how I had him blend the external welds to get a little

... more »
Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/23/2020 10:28 AM

Tell BRC I said to hurry up, I can't wait to roost the shit out of one of those.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/22/2020 10:30 AM

Anyone vinyl guys want to do a set of graphics? Any vinyl guys capable of wrapping a sprinter?

Added reply in a thread Aqua blasting / Vapour blasting 9/22/2020 10:25 AM

If people don't want your money, stop trying to give it to them. Keep looking, eventually you'll find a go-getter.

Added reply in a thread 1999 Honda CR250R project 9/21/2020 1:58 PM

I'd love to break that throttle cable. Nice bike.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/21/2020 11:10 AM

This took awhile to procure. Now I need to figure out how to Bluetooth it.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/21/2020 10:52 AM

The RC Valve Honda guys are even worse. That CamP guy has indoctrinated them all into moronhood. "TMX is too hard to jet." ....so if you can't jet a carb, it's the carbs fault? Probably don't even realize the TMX features an additional fuel circuit in ... more »

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/18/2020 3:27 PM

The "aye caramba" less than 45° is what I run. I also use the end bearing "Jimmy twister" and trim extra 10mm off the right side of the bar to compensate for the bearing. I modify the throttle housing to accept the larger cam. It's a Domino KTM cam, ... more »

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/18/2020 3:54 AM

That would reduce velocity. I use them on all bikes. First three things I buy for a bike are a Loudmouth, hard compound full diamond grips, and a G2 throttle.

Added reply in a thread Let’s see your favorite older body style Yamaha’s 9/18/2020 1:00 AM

96-01 is the best IMO. Waiting on a few things to button this one up.

Added reply in a thread Works Ohlins Yamaha YZ360 doesn't meet minimum friend requirement for Farleigh 9/17/2020 3:59 PM

Those kind of guys; you just have to hit them with what I call "the lightning round". You ask them what their port heights are set at, how many CCs the combustion chamber is, and what the squish was. They'll vanish for a week googling how an engine actually ... more »

Added reply in a thread young and stupid 2011 YZ250 9/17/2020 7:51 AM

The CRM subframe is for living room bikes. Imagine tipping over in a corner, picking your bike up, and that thing has a 6" split in it.