RussB's Forum Activity

Reply to Removing Launch Control Button RMZ 3/22/2018 1:01 AM

I've removed mine from my 15 RMZ450 as I didn't feel it made any improvement to my starts what so ever! Remove the tank, then remove the launch control button and wire. Unplug it where it joins to the rest of the loom. I then sealed up the plug end at ... more »

Reply to Iso 2018 Suzuki rmz 250 lightweight parts 3/17/2018 2:18 AM

I saved a fair bit of weight from my 450 using various different techniques, see the build thread below:,46/2015-Suzuki-RMZ450-Proper-Build,1312131 I've personally used the 26'' fat bike inner tube before successfully ... more »

Reply to Is there a difference between cheap and expensive Airfilters 3/9/2018 1:37 AM

Another vote for DT-1 from me. Very good quality filter and very well made. I always use a DT-1 for longer Enduro races, or any track that is notoriously dusty. As above, they seal on the airbox better than any other filter IMO

Reply to Suzuki RMZ 250 450 OEM and aftermarket parts for sale 3/8/2018 3:39 PM

Put me down for the Carbon rotor guard and caliper guard. Also interested in your Ti as well. I've bought from you before, will drop you an email.

Reply to Boots for injured ankle, SG12 / tech 7 3/3/2018 7:11 AM

I found the same when they are new. To speed up the breaking in process and open out the boot a little, I lightly wedged something (i used a trainer placed in sideways, one in each boot) and then left over night. This opened the boot out and took the ... more »

Reply to The fastest brother duo right now? 3/2/2018 11:07 AM

Matt and Jake Moss were pretty handy on dirt scooters

Reply to Pro Circuit Ti-6 Sytem for CRF 250 '18....HEAVY !! 3/1/2018 8:23 AM

Good work Nino, thanks for reporting. I don't own a CRF250 but it's good to see stuff like this. If more people reported their findings it would give everyone else the chance to make a more informed decision before dumping a load of money only to be ... more »

Reply to Showa a-kit question 2/27/2018 12:00 AM

Not the exact answer you are looking for... but I raced a guy last year who has done what you are looking to do. He managed to fit an Ohlins from a later model CRF (2015 I believe) to his 1989 CR250. He was fast and his bike looked as though it handled

... more »
Reply to Showa TAC... I am getting lost. 2/26/2018 5:18 AM

Ah the Showa TAC.... I spent many frustrating days with it on my RMZ450. Sounds to me as if you have something quite serious going on, its normal for the main inner chamber to increase in PSI a little due to heat build up in the fork and temperature ... more »

Reply to What does Honda do? 2/26/2018 3:15 AM

Did you guys not hear? Larocco is making a come back to reclaim the All Time SX Starts title. That Honda has his name all over it

Reply to Ryno Power Hydration Fuel 2/26/2018 1:52 AM

Good job! Nice going. Glad the camelback tips worked out for you. I'm also new to the Enduro scene, coming from a Motocross background. It definitely takes time to adapt and change your mindset to suit, but keep at it and you will figure it out pretty

... more »
Reply to RM 250 Jetting Question 2/23/2018 1:46 PM

Turning in the power valve adds powervalve spring tension, delaying the opening of the powervale, making for a smoother power delivery. So if you want lots of hit, run LESS preload (turn anti clockwise). This is a very good tuning tool and is free. In ... more »

Reply to Ryno Power Hydration Fuel 2/23/2018 3:14 AM

Do both. I mix a 500ml bottle and drink in the morning leading up to race. Then I mix another 500ml bottle, then chuck that and 1 litre of straight water into my 1.5L camelbak, creating a weaker mix. It's worth experimenting to see what works for you. ... more »

Reply to Suzuki RM250 Enduro Build - Complete with Pics 2/20/2018 3:22 AM

Thanks! Almost... the shock lengths are identical. However the area above the upper shock mount is much beefier on the KYB compared to the stock Showa. As a result the KYB just fouled on the upper shock mount, and contacted the tube that the subframe ... more »

Reply to RM 250 Jetting Question 2/19/2018 11:54 PM

lcgordon - Just to add re assurance, you can 100% trust what digger (and Digger29) is saying. digger is a very knowledgeable guy and helped me out a ton with jetting a while ago for my RM250. Squish wise - my 08 was 1.38mm stock, I dropped it down to ... more »

Reply to Suzuki RM250 Enduro Build - Complete with Pics 2/19/2018 6:32 AM

Nooo no no. I put the KYB's back in for the photos

They're just too damn pretty to leave off the bike. The KYB's are set up for MX and the stock Showas have been revalved for Enduro. I didn't want to make the RM just an Enduro bike, as its ... more »
Reply to Boots for injured ankle, SG12 / tech 7 2/19/2018 4:11 AM

SG12 100%. A really great boot, I wont buy another brand now since switching to Gaerne. I'm on my 2nd set but they last ages and don't go loose even after 2 seasons use.

Reply to Suzuki RM250 Enduro Build - Complete with Pics 2/19/2018 3:36 AM

First round of the Rock Oil Hare and Hound championship yesterday at Wymeswold. Based on a motocross track and then using the surrounding fields. Around 6 miles per lap. The track section was super wet with lots of standing water. The field sections

... more »
Reply to Telford off road show today 2/19/2018 12:54 AM

Yep good show as always. It seemed bigger and busier to me this year? Always a good sign. I scored some good parts for the 89 RM250, kickstarter gear assembly and a complete gearbox assembly for £45. Will save me some money! Also got a Race Tech gold ... more »

Reply to Drill holes in rmz Airbox 2/19/2018 12:01 AM

The RMZ air filter comes cage comes stock with a fairly fine metal mesh across it. For what reason I have no idea! The RM250 uses the same size and shape filter cage but does not have the mesh, allowing for better air flow. A quick and simple mod that ... more »