Added reply in a thread Yamaha Fork clicker question 7/19/2012 5:40 PM

Anytime, happy to help

Added reply in a thread Yamaha Fork clicker question 7/19/2012 12:05 PM

For your bike compression is on top and rebound on bottom. You have a twin chamber fork. Older bikes have open cartridge forks with the rebound on top and the compression clicker is on bottom.

Added reply in a thread Honda cr125r suspension adjusting 7/13/2012 12:31 AM

Start by getting the right springs for your weight and application. MX-Tech's or Race Tech's site will provide you with recommended rates. Also it does hurt to start with fresh suspension fluid and wear parts (if needed).

Added reply in a thread Search for KX125 PC Links 7/12/2012 5:03 PM

Kenny, I dont know where you can find a link for that bike, but there is another option..... But first, as you stated the PC link is 2mm longer. This is important as the rear shock is now closer to the rear wheel, which means the wheel has less leverage ... more »

Added reply in a thread 2012 Ktm 450 FE Rear brake problem 7/9/2012 1:12 PM

Yeah I noticed that too about 2012 not being posted. Give your local KTM dealer a call. They should be able to find it on their KTM dealer network.

Added reply in a thread 2012 Ktm 450 FE Rear brake problem 7/8/2012 6:12 PM

The plunger seal inside the master cylinder can wear and not adequately seal. Therefore when you press the pedal sufficient pressure doesn't build to engage thw piston/pads. Think of it as an engine piston with bad rings, you will have a lot of blow ... more »

Added reply in a thread 04 yz250f 7/3/2012 7:28 PM

Have you tried letting the bike cool down, adjusting the oil to the proper amount, and restarting it? (Assuming you didnt hear any malfunctioning noise) That is difficult to accurately diagnos without a tear down. Too much oil generates excess pressure ... more »

Added reply in a thread Bog in my 2003 CR125 7/2/2012 2:57 PM

Like XNationalWrench said sounds like float level. But also check your reeds, they could be chipped/worn and not sealing 100%.

Added reply in a thread Help 6/29/2012 12:19 PM

You need a fly wheel puller. Only Chuck Norris can pull off fly wheels by hand.

Added reply in a thread Fork help 2002 CR 125 6/29/2012 12:18 PM

Exactly what that guy said ^^^^^^^^^^. Your triple clamp is the best vice to hold it.

Added reply in a thread Soooo .... is it safe to buy an Atlas? 6/28/2012 8:02 PM

Hmmmm, that woman looks familiar.......just kidding.

Added reply in a thread 2 Stroke Crank 6/27/2012 2:27 PM

Crank Works in Tempe, Arizona does awesome work. (A lot of professional MX and Off-Road teams use them, including the factories) http://www.crankworks.com/ We use them for all of our crank work and have always been very pleased with the results. Send them your crank with ... more »

Added reply in a thread air fork question? 6/20/2012 2:45 PM

In regards to the KYB PSF fork for on the Honda CRF450 and Kawasaki KX450F.... -The entire fork is pressurized with air (the oil seal does hold this air in fork) -There is no bladder like the WP CC forks. -A leaking oil seal will still hold the air pressure. ... more »

Added reply in a thread Piston & kits.... 6/19/2012 11:07 PM

Stock is always good too and fair priced.

Added reply in a thread 2002 honda cr 125 6/16/2012 3:40 PM

Stock jetting is a good starting point to work from, espeically since you said the bike is stock. Also check the condition of the reeds.

Added reply in a thread Speedworld May be forced to close! 6/16/2012 1:50 AM

I was there tonight for the Friday Night race. The track shaped up really well. Dan looked to be in good spirits from what I saw. Im hoping everything gets resolved.

Added reply in a thread Tell me about the 08-10 Suzuki Showas 6/14/2012 7:48 PM

Do you not plan on having the forks revalved? WP CC forks are great forks and well designed. Since that fork has come out 5 years ago (believed it came on a 07 SXF model) there has been development by KTM/WP and aftermarket tuners. A good tuner will ... more »

Added reply in a thread 97 cr125 clutch issue 6/12/2012 7:54 PM

Verify the cable is the correct one. Could be too long. I would pull your clutch back apart. Then print out the microfiche for the clutch assembly on your bike. That will show you the order the plates should be in. Or find a mechanic is that more experienced ... more »

Added reply in a thread Whats this noise? 6/12/2012 2:05 PM

Good find! Yes, definitely replace the gasket, along with the exhaust header gasket.

Added reply in a thread 2002 cr80 fork seals 6/11/2012 9:42 PM

That style of a fork is pretty easy to service. The tools that will help the most is a real seal driver and oil height setting tool. Here is a video link of someone building forks very similar to yours. http://www.youtube.com/watch?v=MJCwpCiCfpU