Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 4:19 AM

I think it would be over torqued then, I need to back off to the 23 foot pounds and then do the third step. I'm worried that I have it over torqued at 35 lb. if I have to take it apart to replace the studs then the gaskets are ruined , pretty sure they're ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 2:25 AM

Now you got me wondering if they do want the studs replaced, I noticed on the previous torque page they had a torque listed for them I've never seen that in the manual before. I was looking at the manual online kind of a pain to scroll through the pages. ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 6:47 PM

They've been running the same torque spec Sense 2001 the engine changes weren't that drastic , I don't understand them changing it . maybe somebody will come along and let me know what the 50° degrees equates to in foot pounds

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 6:13 PM

Do you think it'd be okay to back off to the second torque or do you feel the gaskets would be ruined bike hasn't been started or fluid put back in it.

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 5:59 PM

No they don't require the studs to be replaced.. I'm going to call KTM Tech hopefully somebody's there to see if the 35 lb is okay, not sure why they changed it.

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 5:34 PM

I never even heard of that I just looked it up, this is for KTM 350 they are always 35 foot pounds I was doing a rebuild on a 2018 decided to check the torque spec just in case something change. I hope I didn't screw up $150 worth of gaskets since they're ... more »

Started new thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 5:14 PM

What does step 3 in this torque sequence mean ?

This forum thread has 54 replies

Added reply in a thread Weirdest mechanical failure or problem 5/11/2020 3:54 PM

... more »
Added reply in a thread Weirdest mechanical failure or problem 5/11/2020 3:51 PM

Yes I am photos on next page because I have big thumbs

Added reply in a thread Weirdest mechanical failure or problem 5/11/2020 2:56 PM

my kid ran hour during a Hare Scramble with his chain like this.

Added reply in a thread Let’s talk WP Aer 48 Fork 5/9/2020 10:44 AM

Ok , I'm expecting it around Wednesday or Thursday. he didn't have them in stock he had to order it and valve it before sending it to me.

Added reply in a thread Let’s talk WP Aer 48 Fork 5/8/2020 2:21 PM

I got a little lucky I guess ohlins had a sale Dean Burke still had two sets of the reduce priced Forks left, I believe normally there 3300. I have a flow shock coming to and he revalves them for free.

Added reply in a thread Let’s talk WP Aer 48 Fork 5/8/2020 1:20 PM

I just fixed my kids air forks.

Added reply in a thread Can someone show me a picture of a KX front wheel in a cross 3 pattern 5/8/2020 4:13 AM

thank you, I have the right spokes I just didn't know the spacing it's 6 instead of 4. When I started doing it didn't look right to me thanks for the good picture 👍

Started new thread Can someone show me a picture of a KX front wheel in a cross 3 pattern 5/7/2020 2:21 PM

just like the title says I have an aftermarket wheel off of a 19 KX450 and the guy wants me to change it to a cross 3 pattern

This forum thread has 3 replies

Added reply in a thread Interesting release from Factory One Sherco 4/29/2020 5:43 PM

Like I said in my previous post, my observations go back a few years I'm sure the bikes have much improved. I know Kyle to he does do well on them.

Added reply in a thread Interesting release from Factory One Sherco 4/29/2020 3:23 PM

Enduros aren't the same as GNCC,we have a local kid Thorn Devlin that does really good at Enduros on betas also.

Added reply in a thread Interesting release from Factory One Sherco 4/29/2020 4:21 AM

It says he got two seconds and a third ,it doesn't say he finished third for the season. I was thinking of guys like Nick Davis who was always getting hurt on the bike ,Jessie Gerome who's results suffered his first race back with a KTM on a borrowed ... more »

Added reply in a thread Interesting release from Factory One Sherco 4/28/2020 7:25 PM

wow that sounds like a bunch of bulshit so the guy gets his knee fixed and they're going to fire him for that..

Added reply in a thread Help identify autograph 4/28/2020 1:53 PM

I guess you're the only old guy on here thanks ! 😂