If you Are you running Brake pads that squeal like a real hard race senter, that's what's breaking the spokes. Had the same problem almost couldn't finish a race so many spoke would break on the brake side of the wheel. Ask the same question on KTM talk. ... more »

You worded your complaint wrong , it should have been your frame snapped causing you to crash... as far as the guys ragging on KTM at least they stand behind their products and take care of their customers.

Problem with the gas line is that their made to fit the XC tank also so the gas line is on the long side.

Well that's number four, 😂I just got off the phone with a buddy of mine who works on race cars he told me that is probably around 36 foot pounds the 180 degree torque so this kind of makes sense. he works on some expensive stuff so I trust him.

S*** I thought you worked for them to 😂 I used to be like that for certain product that I don't care to endorse anymore my kid always asked me if I was on the payroll.

I actually had a reused one in a bike that was ran. it was a while back I don't remember what the guy did wrong but he didn't want me to buy new gaskets cuz he just bought them. it worked that's not something I would personally do my own bikes, once ... more »

yes the base is a single layer Steel

Yeah this is my next debate that means I have to buy a new clip for the piston ,I put the Pistons in on the bench. freaking $90 for a head gasket 60 for the base. I did ask the guy at KTM if I just backed off on the nuts a little and started at the second ... more »

Thank you ,so KTM was right . now I have to go buy another torque wrench.

Just like I posted, member on here tells me it's still 35 foot pounds he just did his bike. KTM tells me step 3 is 180 degrees , the manual on my phone says step 3 is 50° . I now have three different Torx for the head just need to know which one is right

Okay and now I'm even more confused the above gentleman says the manual hasn't changed still 35 lb he's going to send me copies of the pages later, and thank you. manual that I have my my phone says 50 degrees and I just got off at the phone with KTM ... more »

Yes I would appreciate ,I think the mystery is solved though I'm pretty sure European bikes have different specs than us maybe somebody here can confirm

It is a cairoli maybe they use different specs in Europe

I got that from a shop manual online. do you have the 19 shop manual it would be the same , maybe the one I was looking at was european-spec .I think it did say Corolla replica which I don't think they brought to the US . I have to go look at it again ... more »

you guys are all full of good news LOL, I'm still waiting to hear back from KTM I'll post here what they say in case somebody stumbles across this tread with a similar question. I tried looking the price up on those studs there dealer only. all my service ... more »

I'm trying to convince myself the same thing basically nothing looks different from the pre 2016 engine and 35 lb was fine for them. I'm hoping to get a hold of somebody I KTM and they tell me just send it, until then my OCD has me overthinking it lol. ... more »

😂

I think it would be over torqued then, I need to back off to the 23 foot pounds and then do the third step. I'm worried that I have it over torqued at 35 lb. if I have to take it apart to replace the studs then the gaskets are ruined , pretty sure they're ... more »