Added reply in a thread Snapped frame 2020 yz250F 11/1/2020 6:58 AM

You worded your complaint wrong , it should have been your frame snapped causing you to crash... as far as the guys ragging on KTM at least they stand behind their products and take care of their customers.

Added reply in a thread Anybody had problem with their fuel pump on their KTM ? 10/1/2020 10:08 AM

Problem with the gas line is that their made to fit the XC tank also so the gas line is on the long side.

Added reply in a thread High point regional called out by reporters 5/22/2020 4:30 PM

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 3:52 PM

Well that's number four, 😂I just got off the phone with a buddy of mine who works on race cars he told me that is probably around 36 foot pounds the 180 degree torque so this kind of makes sense. he works on some expensive stuff so I trust him.

... more »
Added reply in a thread Beta 300 RX to be announced, let the speculation begin 5/20/2020 12:36 PM

S*** I thought you worked for them to 😂 I used to be like that for certain product that I don't care to endorse anymore my kid always asked me if I was on the payroll.

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 12:07 PM

I actually had a reused one in a bike that was ran. it was a while back I don't remember what the guy did wrong but he didn't want me to buy new gaskets cuz he just bought them. it worked that's not something I would personally do my own bikes, once ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 11:52 AM

yes the base is a single layer Steel

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 11:38 AM

Yeah this is my next debate that means I have to buy a new clip for the piston ,I put the Pistons in on the bench. freaking $90 for a head gasket 60 for the base. I did ask the guy at KTM if I just backed off on the nuts a little and started at the second ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 11:19 AM

Thank you ,so KTM was right . now I have to go buy another torque wrench.

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 10:56 AM

Just like I posted, member on here tells me it's still 35 foot pounds he just did his bike. KTM tells me step 3 is 180 degrees , the manual on my phone says step 3 is 50° . I now have three different Torx for the head just need to know which one is right

... more »
Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 10:29 AM

Okay and now I'm even more confused the above gentleman says the manual hasn't changed still 35 lb he's going to send me copies of the pages later, and thank you. manual that I have my my phone says 50 degrees and I just got off at the phone with KTM ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 9:57 AM

Yes I would appreciate ,I think the mystery is solved though I'm pretty sure European bikes have different specs than us maybe somebody here can confirm

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 9:45 AM

It is a cairoli maybe they use different specs in Europe

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 9:41 AM

I got that from a shop manual online. do you have the 19 shop manual it would be the same , maybe the one I was looking at was european-spec .I think it did say Corolla replica which I don't think they brought to the US . I have to go look at it again ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 8:17 AM

you guys are all full of good news LOL, I'm still waiting to hear back from KTM I'll post here what they say in case somebody stumbles across this tread with a similar question. I tried looking the price up on those studs there dealer only. all my service ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 4:55 AM

I'm trying to convince myself the same thing basically nothing looks different from the pre 2016 engine and 35 lb was fine for them. I'm hoping to get a hold of somebody I KTM and they tell me just send it, until then my OCD has me overthinking it lol. ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 4:28 AM

😂

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 4:19 AM

I think it would be over torqued then, I need to back off to the 23 foot pounds and then do the third step. I'm worried that I have it over torqued at 35 lb. if I have to take it apart to replace the studs then the gaskets are ruined , pretty sure they're ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/20/2020 2:25 AM

Now you got me wondering if they do want the studs replaced, I noticed on the previous torque page they had a torque listed for them I've never seen that in the manual before. I was looking at the manual online kind of a pain to scroll through the pages. ... more »

Added reply in a thread Torque sequence question( somebody with a 2018 KTM 350 manual please read) 5/19/2020 6:47 PM

They've been running the same torque spec Sense 2001 the engine changes weren't that drastic , I don't understand them changing it . maybe somebody will come along and let me know what the 50° degrees equates to in foot pounds