Added reply in a thread Do you know someone like this? 7/12/2019 7:59 PM

Sweet bike.

Added reply in a thread Honda CR125 1991(dyno video + charts) + CR125 1992 + YZ125 1996 7/12/2019 6:12 PM

This is to show you just how weak the early and mid 2000 Honda's were. It's hard to imagine Honda let this happen. I know it was the time when the rave of the 4T were coming in but still. 7-8 HP is hard to even comprehend. Lol. They made some ... more »
Added reply in a thread Honda CR125 1991(dyno video + charts) + CR125 1992 + YZ125 1996 7/11/2019 11:58 PM

This is an awesome build, you did a great job!!! I'm a Honda die hard and my 07 CR 125 is down for a rebuild and I will look at doing some of the case mods you did. Compared to my older HPP bikes I've owned the 07 runs strong with the mods I have but ... more »

Added reply in a thread Holy s*** 2020 kx250 7/11/2019 10:27 PM

I'm looking to get a 2020 250f, I'm a Honda guy so I'm hoping the new changes improve the bike. If not it's good to know the Kawi made some good changes and I would consider it.

Added reply in a thread 2020 KX250 FIRST RIDE 7/11/2019 9:27 PM

That's good to know, making my decision on a 2020 250f is getting harder and harder, there all really good bikes. I'm a Honda guy so I'm just waiting on some test with the new changes they made. Glad you like it!

Added reply in a thread Holy s*** 2020 kx250 7/11/2019 1:35 AM

I'm like you, I'm surprise all the motor changes and no electric start. I'm assuming basically the same cases as last year. The bean counters must of jumped in and said, wait till next year. It will affect some people's decision not having an electric ... more »

Added reply in a thread Holy s*** 2020 kx250 7/11/2019 1:03 AM

From the test is seems the riders liked the motor a lot. 4th brand to go finger follower set up, more cam, bigger bore, shorter stroke and bigger valves for more rev. I guess this is the new 250f trend, just hope this new high RPM trend doesn't start ... more »

Added a comment about product review First Impression: 2020 Kawasaki KX250 7/11/2019 12:17 AM
Added reply in a thread 2018 CRF250R runs hot 7/10/2019 3:36 PM

Does anyone know what Honda did to address the problem on the 19' and 20'?. I know in the past on a supercharged mustang Mobil 1 synthetic oil would drop the water temperature down about 8-10 degrees over conventional oil which is a good bit. We did ... more »

Added reply in a thread 1997 CR125 low hr refresh 7/9/2019 7:12 PM

You tried contacting them? I know the guy from Italy with all the nice Mugen CR's speaks highly of the Messico pipes and I think I may try and locate one for my 07, I took the PC off my 07 and put the stock pipe back on and it seems to have broader power ... more »

Added reply in a thread 1997 CR125 low hr refresh 7/9/2019 6:34 PM

Great find, I had a 97 put on a Bills pipe, tightened up the squish and re-jet. All the HPP motors screamed, fun times indeed. So funny when I got my 2000 it was so slow I thought something was wrong with it. lol, That's the first time I said I should ... more »

Liked a comment on the item Vital MX 2019 Dream Bike Winner Announcement! 7/9/2019 6:14 PM

Well Shat! I mean, congrats Kaden!

Added reply in a thread 1986 CR125 alive again! she is done! 7/8/2019 4:13 PM

Your doing a great job on one of the best 125's ever. Keep up the good work, this is good build to follow. I've been trying to hunt down a 87 to restore and these older bikes are getting harder and harder to find!!

Added reply in a thread 1989 CR125 Project... 7/8/2019 3:33 PM

Gonna be a sweet looking bike, the 89 screamed on top . I always loved the older CR 125's, they always have the motor department covered starting in 1986 to about 1996. If you look at the later years Yam, Suzuki and Kawi cylinders they pretty much copied ... more »

Added reply in a thread Who can re-anodize fork tubes? 7/8/2019 8:06 AM

I thought about that also, just spoke to a guy at Surface Technologies in Houston. They have done fork tubes before around $90 both tubes. I will check into aluminart. Thanks.

Added reply in a thread Who can re-anodize fork tubes? 7/8/2019 6:38 AM

Thanks guys!

Added reply in a thread Who can re-anodize fork tubes? 7/7/2019 3:04 PM

Thanks!

Started new thread Who can re-anodize fork tubes? 7/7/2019 2:48 PM

Rebuilding a older CRF250 and looking to see if anyone can recommend or knows of a shop who can re-anodize the fork tubes. Thanks

This forum thread has 14 replies

Added reply in a thread YZ125 97 Bob Moore project 6/19/2019 11:46 PM

This is a good build to follow. Good job

Added reply in a thread DMC or TUF racing? 6/19/2019 11:32 PM

Yes, thanks for sharing, that's a sweet looking bike and photo in general. The good old days!!