Liked a bike check Mike's bike - 2000 Japan RC250M 11/18/2021 3:34 AM
Mike's bike - 2000 Japan RC250M
Liked a bike check 2004 cr125 with 2022 front end 11/2/2021 3:25 AM
2004 cr125 with 2022 front end
Added reply in a thread So what's Levi going to do at Unadilla ? 8/12/2021 9:03 PM

If he gets decent starts both motos and stays off the ground top 10. We all know he'll be on a bike that can start top 5. I hope he does well and turn some heads!!

Added reply in a thread 2022 CRF250R 7/30/2021 4:10 PM

If they really drop 8lbs that's close to having 1 free horsepower. A good start for Honda on the 2022

Added reply in a thread 1988 Suzuki RM250: Classic Motocross Review 5/7/2021 11:54 AM

Keep em coming Tony, love the videos you make on the older bikes.

Added reply in a thread Backwards Engine YZ250F Dominance 5/2/2021 8:53 PM

To make 54 hp with a 250F i would say around 15,500 RPM's or higher. It would take around 18.5 ft lbs of torque at that RPM to put it around 54 HP which is pretty impressive. 22 ft lbs would be the max torque at a lower RPM.

Added reply in a thread Going up 2 teeth? (not a MXA joke) aka Finding bottom in Hondas 250f 4/15/2021 11:37 AM

2020 has Yosh exhaust, XPR vortex, recluse torque drive clutch, stock gearing and back fire screen removed made a pretty significant difference. Picks up much sooner on the bottom and revs out hard to the increased 14,600 limiter, can use 3rd in most ... more »

Added reply in a thread The visual history of Suzuki's motocross models 1968-2021 3/20/2021 12:52 AM

Thanks for all the hard work in making and sharing all the videos!!

Added reply in a thread 2022 CRF250R 2/7/2021 10:57 AM

When my bike was stock I didn't feel it was a slow bike but the lack low end torque was noticeable. You had to keep momentum through turns. A re-mapped vortex, Yosh exh. air filter screen delete, good fuel and a Recluse torque drive clutch helped mine ... more »

Added reply in a thread Yz125 Cylinder Sleeve 1/20/2021 6:11 PM

Whatever you do, do not sleeve. You will loose a lot of power especially if the ports are pretty far off. I once replaced a sleeved cylinder with a brand new OEM cylinder on a 98 YZ 125 and it was night and day difference on how much stronger the bike ... more »

Liked a bike check Jeremy McGrath KX125 9/2/2020 10:33 AM
Jeremy McGrath KX125
Added reply in a thread 2018 Yamaha YZ450F stops mid moto 7/25/2020 10:09 PM

This started happening to my neighbors 18 yzf450. Picked up the bike used in excellent condition with 5 original hours on it. Bike was solid for about 15-20 motos of practice then just started dying mid moto for no reason but would always start back ... more »

Added reply in a thread Classic Motocross Review: 2000 Honda CR125R 7/25/2020 9:14 PM

Looking good Ryno!

Added reply in a thread Classic Motocross Review: 2000 Honda CR125R 7/25/2020 9:13 PM

Same here, keep the videos coming.

Added reply in a thread Tell me about your 2020 CRF250R 7/24/2020 1:27 PM

I really like mine, great ergos and handling. Suspension pretty good out the box, turns much better and less busy at speed then the last Gen. What I noticed the most over my 14 is it follows a rutted turn a lot better no knifing or tucking. I put on ... more »

Added reply in a thread YZ125 & YZ250... Old & New! 7/24/2020 4:03 AM

Very nice!!

Added reply in a thread 1992 YZ250 back to life 7/24/2020 4:01 AM

Hell of job, that is one great looking YZ. I agree the plated pipe looks sweet on your bike. The plastic came out awesome. I re did a old RM tank and it took a lot of time and effort to bring it back to life and you did all the plastic. Can't say enough ... more »

Added reply in a thread 2015 YZ 250F Big Bore Question 7/24/2020 3:28 AM

No, sorry I forgot to mention the cams, the valves are stock Yamaha. It has mild Jesse Williams cams, nothing radical that takes a lot of spring pressure. I also forgot to mention it was dynoed with a brand new O-ring chain that definitely hurt the power ... more »

Added reply in a thread 2015 YZ 250F Big Bore Question 7/23/2020 12:34 PM

This is a yzf 270 build on a conservative dyno anyone can build with a ported head, exhaust, 14.1 comp. out of the box cylinder works 270 kit with .010" cut off the base, GET ecu on pump gas compared to a stock KTM. I was hoping the peak hp ... more »
Added reply in a thread 2015 YZ 250F Big Bore Question 7/23/2020 11:28 AM

Stock to stock about 1-2 more HP through out the curve.