Added reply in a thread Removing clutch hub without special tool 9/14/2019 3:30 PM

I plan to buy the tool but I couldn't get it before a race this weekend. Thanks

Added reply in a thread Removing clutch hub without special tool 9/13/2019 8:21 PM

Thanks for the advice. The impact would work well for removal but I would still need to use a torque wrench to install.

Started new thread Grooved clutch hub 9/13/2019 7:51 PM

I searched for videos on "fixing" grooves in clutch hub and basket but the only thing anyone seems concerned with are the fingers on the basket. Is it not just as important for the hub to be smooth? I would think that hanging steel plates would have ... more »

This forum thread has 3 replies

Added reply in a thread Removing clutch hub without special tool 9/13/2019 7:46 PM

I planned on making a tool with old plates but they were thrown out. I will use the next set for that when they wear out. Thanks.

Added reply in a thread Removing clutch hub without special tool 9/13/2019 7:44 PM

Ahh yes, I was thinking about the gear reduction leverage wrong. Thanks.

Started new thread Removing clutch hub without special tool 9/13/2019 6:03 PM

Does anyone see a problem with this technique that I'm not thinking of? Put the transmission in 1st gear and place a bar through the rear wheel and resting on the swingarm. This will allow removing and installing the clutch hub nut but will it cause ... more »

This forum thread has 11 replies

Added reply in a thread Yzf 250 2020 mapping?? 9/7/2019 9:37 AM

You designate map 1 and map 2 on your phone from the list of available maps.

Added reply in a thread Yzf 250 2020 mapping?? 9/7/2019 4:54 AM

When map 2 is selected the button will light up blue, if it's not blue then you are in map 1. The wifi connection will drop a minute or so after the bike if off.

Added reply in a thread Congrats AC! 8/24/2019 10:55 AM

So happy for AC! Congrats!

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/22/2019 4:34 AM

You sold me. I'm gonna try them. Thanks for taking the time to reply.

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/21/2019 5:13 PM

Thanks for the info and reply.

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/21/2019 5:12 PM

Thanks for the pics, looks like a significant drop and back compared to stock. It looks like the pegs are lower than the mount. Does your boot try to rest on the mount or is not an issue?

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/20/2019 4:38 PM

Yes, please do. Also let me know exactly which pegs you bought so I make sure to get the right ones. Thanks a lot.

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/20/2019 3:29 PM

Thanks for the reply. Are they lower than your stock ones were? 12mm lower?

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/20/2019 3:28 PM

Thanks for the reply. I looked at System Tech because I saw it in a thread for tall guys but I didn't see anything for the four strokes. I will search their site some more tho.

Added reply in a thread Confirm- any lower pegs for 2019 YZ250F? 8/20/2019 2:56 PM

Started new thread Confirm- any lower pegs for 2019 YZ250F? 8/20/2019 12:49 PM

Fastway says their pegs do not work in the lower position on Yamaha and Flo says that they are not certain if their pegs are actually lower than stock because they think that Yamaha lowered the pegs in 2019. Does anyone have a set of pegs that they can ... more »

This forum thread has 15 replies

Added reply in a thread Ty Masterpool --- Because Science!! 8/19/2019 2:56 PM

I always watch AC's go pro footage and my jaw dropped when I saw that. There is another face of a jump before this happened where Ty goes from power sliding one direction to power slide the other direction to a scrub. Mad skills and luck.

Added reply in a thread Yzf 250 2020 mapping?? 8/11/2019 8:23 AM

Yes, you can save 2 maps to the bike and toggle between them with the button on the bars at any time without getting back into the app.

Added reply in a thread Yz85 clutch won’t disengage. 7/16/2019 6:37 PM

Aside from all of the above advice, the metal discs probably have a "sharp" side and they should all be facing the same direction. If you remove the clutch discs and reinstall them, feel each metal plate at the edges to make sure that the sharp sides ... more »