Added reply in a thread No sx on FS1 tonight... (in Canada) 1/28/2017 5:05 PM

Daily Motion

Added reply in a thread Fork Conundrum 1/28/2017 5:01 PM

1 up on the spring rate won't make a difference, valving will...

Added reply in a thread Whats your favorite YZ250 clutch basket? 1/28/2017 4:58 PM

The GYTR is not a restamped Hinson. GYTR engineers left Hinson and went to work for GYTR...

Added reply in a thread 2016 yz450f engine noise 45 hrs 1/28/2017 4:56 PM

Why new plug? I would be looking at the cam chain...

Added reply in a thread Another Ken Roczen Update: Latest Elbow Surgery 1/22/2017 7:28 AM

Added reply in a thread Fork Conundrum 1/22/2017 7:13 AM

Outside the refresh, it could be a number of things such as worn parts, bent shims, bent fork tube, etc etc. I would check and make sure your wheel and fork are in alignment first as that will effect performance. But assuming everything is good, it's ... more »

Added reply in a thread Headlight Bulb Angle for woods bike? 1/21/2017 9:05 PM

You've got some hurdles. First, your running a AC system on your 05, LED require DC or a converter.. You'll lose a decent amount of your available watts during the conversion and your 35w AC watts will drop to about 15-20. Personally, abandon you current ... more »

Added reply in a thread Headlight Bulb Angle for woods bike? 1/21/2017 7:03 PM

I have to somewhat agree with you and the Task lighting. In comparison, my Baja Designs stuff blows them out of the water...

Added reply in a thread Headlight Bulb Angle for woods bike? 1/21/2017 6:49 PM

I have to somewhat agree with you and the Task lighting. In comparison, my Baja Designs stuff blows them out of the water...

Added reply in a thread TC 250 flywheel on TX 300 1/21/2017 6:33 PM

The short and simple answer is no regarding the flywheel. Different ignition systems (stator is external on the TX vs internal on the TC), different crank shaft (to accommodate the different stator/flywheel), different flywheel (ring gear on the TX for ... more »

Added reply in a thread CR250R Engine Rebuild Advice 1/21/2017 6:19 PM

I would look into the Wrench Rabbit deal... Apparently it's EVERYTHING needed when doing a motor job...

Added reply in a thread Clutch upgrade question? 1/21/2017 6:17 PM

I would buy the Rekluse stuff for the added benefits of what a Rekluse provides...Whether it's Rekluse or Hinson it's going to cost you. But all that being said, unless you 'need' a new basket, pressure plate and hub, stock is going to be just fine. ... more »

Added reply in a thread Fork Conundrum 1/21/2017 6:10 PM

When's the last time they had a service?

Added reply in a thread Headlight Bulb Angle for woods bike? 1/21/2017 9:32 AM

What bike? Stock headlight mask? What bulb?

Added reply in a thread cone valve 48mm used , for sale 1/21/2017 7:16 AM

Yes, PM sent bam

Added reply in a thread cone valve 48mm used , for sale 1/20/2017 1:22 PM

PM sent

Added reply in a thread cone valve 48mm used , for sale 1/20/2017 1:09 PM

Man, why shouldn't I be buying these?

Added reply in a thread YZ 250 head mod 1/17/2017 10:44 AM

+1

Added reply in a thread YZ 250 head mod 1/17/2017 10:43 AM

Reshape the dome when you so the head and you can run premium octane pump gas all day...

Added reply in a thread 2017 Adelanto Grand Prix 1/14/2017 4:24 PM

If it wasn't 1300miles away I would be there. I enjoy the GP format as we don't have it here in Canada