Added reply in a thread Hrc hyd clutch set up 12/15/2017 5:01 PM

It's not a big deal to do. If you look on any 2012+ Honda case the mold is there for a hydro slave cyl. All you need to do is have the holes drilled and tapped for the slave cyl. Not sure if they are the same bolt pattern as a ktm. If it were it would ... more »

Added reply in a thread 2018 Honda 125 Two Stroke!!! 12/15/2017 4:58 PM

?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️?‍♂️ ... more »

Added reply in a thread Ok, guys. Show me your 5 favorite team bikes, ever! 12/15/2017 4:53 PM

You wouldn't Believe what I had to do to get these graphics for my bike. Still think the ice one huskeys are the sexiest bikes ever made besides a charmichael cr250 two stroke.

Added reply in a thread YZ65 12/13/2017 11:23 AM

Just got confirmation February 30th 2018!! Stamp it.

Added reply in a thread 2018 Husqvarna FC 450 Rockstar Edition 12/10/2017 8:14 PM

But is the exhaust side number plate still gonna melt after the first ride on this one too???????

Added reply in a thread First Look: 2018 KTM 450 SX-F Factory Edition 12/4/2017 10:29 AM

Well that was a huge let down. Let's hope the performance updates are better than the little aesthetics changes.

Added reply in a thread Best Suspension Company for 4CS Forks 12/4/2017 7:04 AM

Your local garbage company can put them to good use. My 16 Husky has them and have been revalved twice. Still like pogo sticks. Worst fork out there imo.

Added reply in a thread 2018 CRF250R delivery date? 12/1/2017 10:21 AM

Live in ny and mine came in today. Going to get it after work.

Added reply in a thread Is this the 2018 Husky factory edition? 11/30/2017 2:03 PM

Can you elaborate any more? Did he say what forks/shock would be on it?

Started new thread Is this the 2018 Husky factory edition? 11/28/2017 8:44 AM

Looks like a AER cone valve fork with a very production warning sticker on it. ??‍♂️

This forum thread has 146 replies

Added reply in a thread 2007 CR250? 11/16/2017 9:47 AM

Have a 06. V force reeds, pic pipe and shorty silencer, shaved cylinder base .030 had the crank balanced and if you do anything put a PWK air striker carb on it. This fixes the finicky jetting issues and prety much makes it run crispy in any condition. ... more »

Added reply in a thread Alta Redshift Fast Charger? 11/8/2017 8:32 AM

Literally lol when I read this. Haha

Added reply in a thread Confused about 2-stroke vs 4-stroke 11/3/2017 12:25 PM

glad some one else caught this too lol

Added reply in a thread Confused about 2-stroke vs 4-stroke 11/3/2017 10:06 AM

Actually a two stroke has two strokes a intake and a exhaust. Up is intake and down is exhaust. When the piston goes up it draws fuel in through the reeds. When it goes down it pushes the exhaust out and when it goes down even further it lets the intake ... more »

Added reply in a thread Hydraulic Clutch on Honda 10/29/2017 7:00 PM

The cases have the set up for a ktm style slave cylinder. You just need to machine out the cases and drill and tap the holes. And make a block off plate for the cable actuator arm. Google factory Honda and you will see Cole Sealys bike with one. The ... more »

Added reply in a thread ML, pit bits on stankdogs 250sx? Ronnies CR250? 10/23/2017 6:56 AM

I would say everyone on a twostroke was running MRX02 as it's the best twostroke fuel you can buy. Unless reed hit up the Yamaha warehouse and got some pre 2004 twostroke fuel they had laying around. I run the MRX02 in my 06 cr and what a difference ... more »

Added reply in a thread Has anyone tried nitrogen in air forks? 10/10/2017 11:29 AM

I use nitrogen for my job all the time so I have it ready available and free to me. I used it in my 13 Honda forks and it never changed more than 1psi throughout the day and it also never leaked out over time. I was religious about checking the pressure ... more »

Added reply in a thread Justin Barcia's MEC Bike 10/10/2017 11:19 AM

Looks bitchin!!!

Added reply in a thread Ktm Owners Question 10/10/2017 11:18 AM

Get bigger rivvit nuts.

Started new thread 2018 CRF250 at dealers?? 10/9/2017 7:15 AM

Just wondering when these things are suppose to be available. My dealer is telling me late December and I have to order it because they don't have any coming in on regular stock order.

This forum thread has 11 replies