Added reply in a thread 1989 ATK 406 Restoration 12/28/2019 3:17 PM

Cleaned up the wheel, got the new tire and tube mounted, cleaned out the wheel bearings and tried to breath new life into them. They will work for a little bit but eventually they will need replaced.

Added reply in a thread 1989 ATK 406 Restoration 12/27/2019 7:40 AM

I started tearing the bike down to the frame for powdercoat. I was able to salvage the foil VIN tag with some dental floss. I believe that I've settled on white for the swingarm and frame.

Before dropping it with the powdercoat guy, ... more »
Added reply in a thread 98 KX250 opinion 12/18/2019 8:21 AM

Dibs on the clutch fiber plates

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 5:33 PM

I think my argument is pretty clear and it's not that thumpers are bad. I also think you are being too generous to Yamaha in predicting the future of the sport.

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 4:04 PM

The industry is different now. It's more about survival. If the environment were different though, I could see Yamaha doing it again for the same reasons. A reverse cylinder yz350 with a different frame, new bodywork, a pipe like nothing you have ever ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 2:39 PM

No I don't think they will. But what I outlined is basically what already happened with the four stroke. The YZ400F was a fantasy that first needed a big rule advantage, then needed the OEM's to subscribe to (or vise versa). What ultimately happened ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 1:03 PM

I had a good condition cylinder head for a yz250f with missing cam caps. That wasn't very fun trying to fit another set of cam caps in order to save a good cylinder head. I also don't enjoy the extra circuits on the FCR flatslide carbs that PWK 36's ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 12:51 PM

"Really if you can do a 2 stroke top end, you can do a 4 stroke top end. IMO it doesnt take any more or less skill to do it." Just compare the common mistakes between the two and you'll find threads that don't exist with 2 strokes

wink
Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 12:39 PM

That was a response to the question, "i dont understand how changing the displacement rule at the pro level is supposed to make 2 stroke sales increase." I don't expect a rule change or OEM's to care about 2 strokes any time soon, but it wasn't that ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/4/2019 11:01 AM

Its like this, if the rule changes and if the OEM's cared, you would see new CR350's and RM350's and KX, YZ, KTM, etc.... all cranking out beautiful brand new 350cc two strokes to compete with 450's. And that RMZ450 that Suzuki can't give away...how's ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/3/2019 4:55 PM

I have both 2 and 4 strokes. So there!

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/3/2019 4:54 PM

That was an exciting time for the four strokes too. I had friends scrambling for a 400f out of the shear curiosity.

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/3/2019 3:17 PM

The definition of "better" is "of a more excellent or effective type or quality." One engine needs more parts and more cc's to make 50HP and 33ft-lbs. By definition one is actually better. The power delivery could be argued to be "better" with a thumper. ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/3/2019 11:08 AM

Its kind of hard for the market to do its thing when the rule book says a 450 can race against a 250 smoker. And especially when Honda cuts its two stroke market for 2008. The market isn't driving four strokes - the manufacturers are. And the dealers ... more »

Added reply in a thread Twisted Development, $7000-dollar question, can you afford it?? 12/3/2019 9:18 AM

I recently restored a 1992 YZ250 and a 2002 YZ250F. Both were in very similar condition - basically total roach jobs with each bike coming with a new cylinder. I paid more for the 92 and ended up with considerably less invested. Each bike needed split

... more »
Added reply in a thread Cringy worthy motocross fashion items 12/3/2019 8:59 AM

I liked the gear. But I wore it for comfort, not to be a bro.

Added reply in a thread 1989 ATK 406 Restoration 11/23/2019 8:40 AM

Thanks! That pipe you posted is for the newer 406. I can still get pipes for the older ones but I'm just trying to reuse what I can

Added reply in a thread 1989 ATK 406 Restoration 11/23/2019 7:37 AM

I think I'm pretty much done. It didnt turn out as I hoped but it does look better.

... more »
Added reply in a thread 1989 ATK 406 Restoration 11/13/2019 8:15 PM

Thanks for the tips! I can use all the help I can get.

smile
Tonight I went back over my welds. In my defense I really had no idea how much weld to build up in each dent. This time around I had an idea...and I went a little more generous in each ... more »
Added reply in a thread 1993 Husqvarna CR125 - Semi-build 11/12/2019 2:14 PM

That's as bad as I've ever seen! Was he running no air filter??