Added reply in a thread 250 ktm sxf throttle body to yz250f conversion Can it be done ? 3/23/2020 1:11 PM

How does it go with the ktm throttle body?

Started new thread Crf 250 19 compression 3/23/2020 1:01 PM

Hello How good is the crf 250 19 conrod? Is thinking about bumping my compession up from 13.9:1 to 14.5:1 And set the cams back to stock times. But can the conrod on the crf 250 last?

This forum thread has 2 replies

Added reply in a thread Racing the Vet (+40) class on a 250f? Good idea? 3/8/2020 3:18 PM

I ridning a crf 250 19 in 30+ vet :-D

Added reply in a thread Ktm sx 250 2020 12 hours old jetting problem 3/2/2020 1:47 PM

The dealer say he has run it too lean so they will not cover it.. I try to make a air valve and little pressure in the engine for a time so I can see if it leak air.

Started new thread Ktm sx 250 2020 12 hours old jetting problem 3/2/2020 12:06 PM

My freind has a sx 250 with 12 hours and the bike is now broken with a 450 mainjet so it need a new cylinder and piston... He buy a used 300 kit of me and the bike is now running again but it can take all the fuel I give it.. First mainjet was 470 and ... more »

This forum thread has 4 replies

Added reply in a thread A new 2018 YZ250 build 3/1/2020 3:41 PM

Have you ever tried a PPS pipe? Do you ever have problems with your transmission? Do you ride ONK in 2018?

Started new thread Crf 250 camshafts 18/19 1/3/2020 4:47 PM

Is there anyone here there have good experience with some of all the aftermarket camshaft? Pro circuit , dcr , webcams?

This forum thread has 2 replies

Added reply in a thread Think Technology Seat Foam - Order Problem 1/2/2020 12:54 PM

Same here... but that's years ago...

Added reply in a thread 250 ktm sxf throttle body to yz250f conversion Can it be done ? 12/29/2019 12:00 PM

https://www.ebay.com/itm/KTM-SXF-450-SXF450-SX-450F-2016-KEIHIN-THROTTLE-BODY-79041001000/163786723989?fits=Submodel%3ASXF%7CMake%3AKTM&hash=item2622731295:g:Y5QAAOSw5BVdNZJA there is many pic of the new ktm throttlebody

Added reply in a thread 250 ktm sxf throttle body to yz250f conversion Can it be done ? 12/29/2019 11:58 AM

I have same idea when i run yzf... But I don't know if it work... If it was me I will try the 2nd injector

Started new thread Bills pipe 12/15/2019 2:09 PM

Where do you buy Bills pipe?

This forum thread has 2 replies

Added reply in a thread BD full tilt copy cat build, the electronics 12/13/2019 2:28 PM

How does the bike run?

Added reply in a thread Husqvarna tc250 2018 dyno 12/13/2019 12:52 AM

I Think ecomaxx is running the Stock carb so there must be a good setting😁

Added reply in a thread Husqvarna tc250 2018 dyno 12/8/2019 1:45 PM

Do you have raised the port timing when you clean the ports? Maybe this is the light in the pic with the exhaust port but the middel transfer port look really big? On my old ktm sx 250 17 I could ride 3 gear in all corner with one touch on clutch or ... more »

Added reply in a thread More front end traction.... 12/3/2019 12:46 PM

I am vet b rider, around 50 hours a year on the bike

Added reply in a thread More front end traction.... 12/3/2019 1:46 AM

I think it might be a feeling so I can't push so hard in turns. I will try some of the things you all mention. Thanks.. I run 13.5 psi in my front tire..

Started new thread More front end traction.... 12/2/2019 11:51 AM

I have a 350 19 but I need more traction on the front. I thinking about a different tire or less sag and or lower the fork in the clamps... what do you guys Think? Tire dunlop mx 33, sag 105mm , fork 2 line in the clamps.

This forum thread has 28 replies

Added reply in a thread 2T engine builder recommendations 11/1/2019 6:16 PM

Varner all day...

Started new thread Sxf 350 2019 pipe 10/21/2019 1:50 AM

Does anyone know which pipe there is best for bottom end?

This forum thread has 2 replies

Added reply in a thread MEC Practice Raw 10/19/2019 5:07 AM

Goooo Mooookie :D