ML512's Forum Activity

New thread Social Scoop 1/22/2018 9:27 AM

Kinda curious, how many of you forum regulars check out Social Scoop every week? Once a month? Never? Added a non-moto section at the bottom this week, just cause.,5779

This forum thread has 26 replies.

Reply to SoCal amateur or vet race series? 1/22/2018 8:00 AM

Vet-X became the Transworld series.

Reply to LitPro Live - Fans Want These Results Realtime Too 1/21/2018 7:31 AM

Those statistics are being shown in the stadium on the monitor and hopefully will make their way onto the broadcast soon. There’s a slight problem with many riders not wanting his data shown though, so the selection of guys is a short list.

Reply to Triple crown team rider pay 1/20/2018 7:51 PM


Reply to WP forks on JA21 ride 1/19/2018 4:26 PM

48mm lowers are steel tubes with DLC, the 52s are aluminum and have never been DLC coated...I don’t believe DLC will adhere to aluminum properly. Also the Husky team has been on Neken clamps for a few years now.

Reply to Calling ML512 1/19/2018 6:39 AM

No, I can say it's not in the works.

Reply to KTM 18.5 fe Microfiche 1/18/2018 6:08 PM

Take custom made tabs, according to the race team.

Reply to Calling ML512 1/18/2018 4:24 PM

I can say that's a no as of now...

Reply to Calling ML512 1/18/2018 4:22 PM

Different suspension and gearing as well...with the one I rode.

Reply to Calling ML512 1/18/2018 4:09 PM

Technically a CRF250RX doesn't exist but I rode a CRF250R that had been built into what would basically be a CRF250RX. It was actually a project done up by EnduroLyfe (IG page) but I will do a write up on it in a couple weeks. I made a post on my personal ... more »

Reply to Air bag protection mandatory in Moto GP. Should SX be next? 1/18/2018 8:22 AM

The technology isn't ready yet. The crew from Alpinestars told me it took ten years of collecting data from MotoGP, World Superbike, and events all over the world to develop the working prototypes...let alone the years since then getting it ready for ... more »

Reply to You think tomac would ever do this? 1/18/2018 7:55 AM

Can we get a bigger facepalm around here?

Reply to Justin Hill - Its Definitely NOT The Bike Right? 1/17/2018 6:31 PM

Those "80-something parts" (it was actually more than that) was in 2016 (15 when it came out)...those engine changes made for less than a half a horsepower difference at best... Just pointing that part out...yes, it's way behind in the power department ... more »

Reply to Canadian Team Possibly Entering 2018 SX Season 1/17/2018 6:26 PM

Ahh, didn't realize Rick Shugel was involved (RSR).

Reply to First visit to Glamis coming up. Do's and don'ts? 1/17/2018 6:16 AM

A sand dune is the product of a wind storm...always expect a drop on the backide of a uphill, don't ride straight off them, roll them at an angle. Don't be like Seth Enslow...

Reply to SX throw out your 2 worst finishes? 1/16/2018 8:14 AM

Per my response to 99% of your threads, NO...

Reply to Showa steering stabilizer? 1/16/2018 7:15 AM

In stock valving they aren't very speed sensitive. They actually work better at low speeds and were more-or-less used by Honda to keep the front end tracking a bit better in ruts. If someone wants to use them as a high-speed damper, they need to be revalved. ... more »

Reply to Which PC rider gets the KX 450 contract 1/16/2018 7:14 AM

Dean Wilson went back to PC for a 250 indoor/450 outdoor deal after his JWR team fell apart shortly after signing, this was heading into 2013. 2014 he did another year for PC with 250 indoors and outdoors, then went to Red Bull KTM in 15/16.

Reply to Milestone & Perris getting ROASTED 1/15/2018 6:08 PM

Sounds like we won’t be shooting bikes at either track in the end future. One magazine tried shooting a new bike at Milestone today and supposedly we’re not allowed to anymore.

Reply to Evgeny Bobryshev Replaces Benoit Paturel at BOS MXGP...Still on a Suzuki 1/15/2018 11:39 AM

Fox Suspension and Fox Moto gear are separate companies...same original family-name but they have no involvement what so ever from a company standpoint.