Added reply in a thread YZ250 Owners....Vibration Resolution 10/17/2021 8:43 AM

There are two primary ways to dampen the vibrations when it comes to filling the bars with something: 1) Fill it with whatever (foam, silicone, most anything that's not a liquid), but make sure that whatever you filled them with isn't bonded to the handlebar ... more »

Added reply in a thread Mx-Techs got a new fork. 10/17/2021 8:32 AM

The 350? A lot more progress will be made as soon as we get the suspension. There are a couple missing pieces yet, but it's 95% ready.

Added reply in a thread Mx-Techs got a new fork. 10/17/2021 8:29 AM

I do not know the pricing details, but I do know it will depend on what options you go with. Give them a call if you'd really like to know!

Added reply in a thread Mx-Techs got a new fork. 10/16/2021 3:18 PM

They're not available yet, but should be in the next couple of weeks.

Added reply in a thread 2005 Yamaha yz125 triple clamp suggestions 10/12/2021 6:52 AM

The 2005 bike is a weird one. They used a fork tube span of 190mm, but in 2006 they increased that to 192mm with the SSS forks. The newer fork made up for that 2mm in the lugs, so the axle and wheels are the same. So the triple clamps are different between ... more »

Added reply in a thread YZ250 Owners....Vibration Resolution 10/11/2021 8:05 AM

Stock is 25mm

Added reply in a thread YZ250 Owners....Vibration Resolution 10/11/2021 7:53 AM

The Yamaha two strokes come with solid mounted bar mounts. Why Yamaha won't update the chassis of these bikes is beyond me, especially when it's such an easy parts switch from their four stroke line! Anyway, replace the triple clamps with pretty much ... more »

Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/23/2021 1:03 PM

Thanks! Moto is only part of what I do, though. A lot of my day is spent doing mundane stuff too with the engineering side of the business: https://www.luxonengineering.com/

Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/23/2021 12:56 PM

Pretty much between any two flat spots will do the trick. Here are a couple that work well. From the front of the block to the back end of the locknut:

From the back of the block to the end of the swingarm (using the depth measuring portion ... more »
Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/23/2021 11:48 AM

There's a little less friction with the DLC coating, so it turns a little smoother against the bearing and seals. It's not dramatic, but it's there. And of course dropping weight is always a performance increase. That's the main benefit of this part. ... more »

Added reply in a thread FC350 Xtrig or Luxon? 9/23/2021 11:43 AM

No distributors outside the USA yet, unfortunately! We do offer international shipping worldwide, though.

Added reply in a thread Mx-Techs got a new fork. 9/23/2021 11:41 AM

49mm Showa tubes are actually a couple percent less rigid than 48mm WP tubes, which is the opposite of what we would think going up in diameter. They're thinner, though, and a good deal lighter. These forks have A LOT of development in them and we'll ... more »

Added reply in a thread FC350 Xtrig or Luxon? 9/23/2021 11:38 AM

All of our triple clamps use the KTM style rubber cone interface, but with the stock span between bar mount posts. So that means that you can use any bar mount that fits a KTM clamp on our KTM clamps (and Husky/GasGas). Our other clamps will accept any ... more »

Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/22/2021 1:46 PM

Yes, in the works. Design is done, we just need to get them on the machine. We'll have a full linkage assembly available. The pullrod will use a different bearing size than stock Yamaha (we'll actually use OEM KTM bearings), but that allows us to use ... more »

Added reply in a thread FC350 Xtrig or Luxon? 9/22/2021 12:58 PM

Just shot you an email. We've got limited stock in most everything right now and have been working like crazy to catch up. That said, we currently have KTM/Husky/GasGas clamps and bar mounts in all colors (black, clear, orange, red) except blue. Blue ... more »

Added reply in a thread FC350 Xtrig or Luxon? 9/22/2021 10:51 AM

Clearly I'm biased... Xtrig makes good parts of high quality, but they're heavy. If weight is an issue, you'll be about a full pound lighter with our clamps. The general consensus from those who try both is that they like ours better. For example, the ... more »

Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/22/2021 8:27 AM

Next up is our axle blocks. These are CNC machined pieces that are hard anodized (the blocks) to resist scratches and hold up well. The nut is included and is clear anodized. This will get scratched up from crashes and the wrench, and those scratches

... more »
Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/22/2021 8:26 AM

Yes, they're available on our website for KTM/Husky/GasGas only at the moment. More details in the next post!

Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/22/2021 8:25 AM

A couple additions to the engine: We recently came out with oil filter covers for the Austrian bikes and they fit most of the four strokes. There’s no performance advantage, they just look nice. They also have an extended outer lip, so it’s easy to grab

... more »
Added reply in a thread Luxon MX Husky FC350 Build - Linkage, Swingarm, and Misc. Bits 9/22/2021 8:24 AM

Here are some miscellaneous parts I’ve added to the bike: The brake tip needs to match the foot pegs, right? Pro-Pegs just happens to make one of those! It’s titanium, just like the foot pegs and available through Motostuff.

Exhaust systems ... more »