Added reply in a thread 1990 KTM MX 250 Built 8/13/2022 10:06 PM

Sorry just a Screenshot Photo the Link does Not work Its from Germany. Enduro365.de

... more »
Added reply in a thread 1991 KTM 300 DXC Build 8/11/2022 8:57 AM

Good Deal for 200$ Looks not bad on the Pictures , for me ist seems to be a 1991 Model should have the Aluminium Clutch/Waterpump Cover not the Magnesium Check out the Linkeage Bearings especially the Bearing and Bolt which is in the Swingarm Mine was ... more »

Added reply in a thread 88’ ktm 500 8/9/2022 1:29 AM

You are lucky to find a pre 1990 with Aluminium Clutch Cover mine was a Magnesium

... more »
Added reply in a thread 88’ ktm 500 8/8/2022 7:51 PM

Is that still a Magnesium Clutch Cover or Aluminium ? André Horvarth from Enduro Klassiker has some Aluminium Clutch Cover from the pre 1990 Models in Stock That Pipe looks amazing what Brand is That?

Added reply in a thread 88’ ktm 500 8/8/2022 7:48 PM

Nice Build cant wait the Result What about Spareparts for these 500 ? Heard about it is very hard to find It was even a challenge to find Parts for my 250 MX from 1990

Added reply in a thread 1990 KTM MX 250 Built 8/4/2022 9:52 PM

The 1991 is a better bike to start a rebuild it is the second year Generation of the 546 Type Engine It think it already have the Aluminium inner Clutch Cover, it has updated Clutch Hub and Disc wich is the same til 1997 About the Ignition i have the ... more »

Added reply in a thread 1990 KTM MX 250 Built 7/24/2022 10:20 PM

New Billet Clutch Cover

... more »
Added reply in a thread 1990 KTM MX 250 Built 7/14/2022 11:26 AM

Pick up some Graphics and Seat Cover today in Italy 🇮🇹

... more »
Added reply in a thread Ktm sx 250 McGrath replica build 7/5/2022 1:30 PM

This 1990 MX 250 I bought 4 month ago which I rebuild at the moment

That 380 KTM I found 4 weeks ago in Germany Jumped into the Car few hours after it was online and drove 1000km for it Crazy but this bikes are so Rare it’s easyer ... more »
Added reply in a thread KTM 200sx 2004 (SXS) 7/5/2022 8:12 AM

Good looking KTM had the same new back in 2005 What is the second KTM right side of the picture?

Added reply in a thread 1990 KTM MX 250 Built 7/5/2022 1:08 AM

Thank you Its a lot of work to finish but time is rare at the moment. Planed some Powdercoating for the brake caliper and Hubs to match the blood red from the frame and maybe New Rims Grüße zurück aus Österreich

Added reply in a thread 1990 KTM MX 250 Built 7/4/2022 9:18 PM

Almost every Spare Part I get from André Horvath Enduro Klassiker , I’m lucky he is close to me I visit him many times for that project to find out the right parts also the Clutch Rubber Dampers KTM Musch in Germany is a Good Adress for Youngtimer parts ... more »

Added reply in a thread 1990 KTM MX 250 Built 7/4/2022 2:52 PM

I think the 1991 is a good bike for rebuild you can interchange many engine parts from 1991-1996 Like Clutch-Cylinder-Power Valve and many Chassis Parts are the Same

Added reply in a thread 1990 KTM MX 250 Built 7/4/2022 11:41 AM

Hope I can translate it right from German but I think you call it Glass Bead blasting Very good looking but the Problem was i covered every hole with Tape but the glass dust come everywhere inside the engine

Added reply in a thread 1990 KTM MX 250 Built 7/3/2022 2:59 PM

Almost 3 Month and 3000€ later 😂 I had almost every part for the Rebuild Engine was out for Cleaning and some Repair Welding

... more »
Added reply in a thread 1990 KTM MX 250 Built 7/3/2022 2:51 PM

Small update on my 250 MX Built Almost every part on that bike was broken Swingarm Crack Inner Clutch Cover Magnesium rotten Outer Clutch Cover Crack Front Wheel Bearings Carburetor Coating comes off Linkeage completely rotten Clutch Basket worn out

... more »
Added reply in a thread Ktm sx 250 McGrath replica build 7/3/2022 12:57 PM

I’m a huge fan of you Bike Builts especially the Big Bore Two Strokes Inspred me so much that buy 2 old KTM Smoker within 4 months which I started to rebuild

Started new thread Any KTM 380 SX/ MXC. Owners here 6/30/2022 2:23 AM

I bought a KTM 380 SX 1998 (with Cable Clutch and Marzocchi Forks) a few weeks back , planed to rebuild it completely in winter when my 250 MX build is finished Never had one so if anybody has experience with that bikes (Parts availability, Technical

... more »

This forum thread has 1 reply

Added reply in a thread Why Do You Ride The Brand Of Bike You Do? 6/26/2022 4:07 AM

Ride KTM because im Austrian 🤣😂 No ,ride KTM because they had so many different Models and they continiung developing Two Strokes Had some RM 125-250 and YZ 125-250 20-25years ago and nothing than problems Switched to KTM in 2003 and now have 3 of the

... more »
Added reply in a thread Ktm 300 2001 to Gp Rep Build 6/22/2022 4:21 AM

Where do you found those Graphic for Shrouds-Front Fender-Side Panels ? Plan my 380 SX built inspired by your amazing 300 when my 250 MX is finished