KILLASAN

KILLASAN

Lives in: TTO

Member since: 07/27/16

Recent Activity Filter:

Started new thread 2000 cr 125 power valves help 3/2/2019 9:51 AM

I need the entire pv setup for a 00 cr125. I cant find anything on fleebay or in any online store. I habe found a 01cr125 cylinder with a complete pv setup. Would that be able to work on a 00 engine? (Entire 01 pv setup in 00 or even the entire cylinder). ... more »

This forum thread has 1 reply

Added reply in a thread Bouncy shock after rebuild help 1/15/2019 8:59 AM

That indeed is true. Showa parts are not readily available. I had recently restored a 92 rm and could not find a bladder anywhere. Even tried buyin a kyb one similar sized. (Didnt work as bladder shaped differently). Guys at fc responded and had 2 instock. ... more »

Added reply in a thread Bouncy shock after rebuild help 1/15/2019 4:11 AM

Definitely!!

Added reply in a thread Bouncy shock after rebuild help 1/14/2019 5:28 PM

Good news . Called factory connection and they have instock. Just ordered hopefuy solves the issue

Added reply in a thread Bouncy shock after rebuild help 1/13/2019 2:34 PM

I highly suspect the same thing. Thanks for the part no. What bike would that be off?

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 3:51 PM

Used some electrical tape. My bullet doesbr fit that thin of a shaft. However you can feel the ease during the rebuild. It doesnt have the force/suction when pumping the shaft. This is before setting the shock head.

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 11:09 AM

4 and 5 seems to be the oring onthe shock head and circlip on the shock body. The bike is a 98 rm 80. I reinstalled eveything and will.get my light nephew to bump on it. If all esle fails i will look into using a heavier oil. Im using light 5 atm.

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 9:32 AM

Piston band is almost exactly 33mm.i thinks it really is too worn piston ban and faiming orings l. I would close off this job here. I cant even seem to find showa 33mm piston bands. The band itself feels brittle. Tbh it looks like the oem one.

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 9:04 AM

Bore is smooth .no marks to suggest damage. I measured it in 4 places and it shows 33mm. Ah this is so confusing. Tha ks for all the help thus far

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 8:54 AM

Here is my shim stack.left is bottom all the way up to the nut.also is the shock head. Gonna try to measure the barrel

... more »

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 8:07 AM

It could be. Do you think a worn piston band may allow the fluid to bypass the piston itself? I have not changed the band.

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 7:04 AM

Which side goes up ?

Added reply in a thread Bouncy shock after rebuild help 1/12/2019 6:04 AM

Tried turning both adjusters all the way in and out. Felt no.difference. piston and shims were installed exactly as it was removed.i used a screw driver to.hold all items in the proper order. Unless the previous owner messed with it. Highly unlikely ... more »

Started new thread Bouncy shock after rebuild help 1/12/2019 5:40 AM

Any folks do their own shock work? Ran into an issue. I rebuilt a shock and its bouncy as hell(was bouncy prior to servicing,however then it had almost no oil or air in the bladder). Shock head was replaced. Piston band looks good. Adjusters were cleaned. ... more »

This forum thread has 28 replies

Added reply in a thread 1992 Rm125 my first love 11/18/2018 6:44 AM

... more »

Added reply in a thread 1992 Rm125 my first love 11/18/2018 6:41 AM

So here we are in November, 5 months or so and quite a few dollars. The project is now completed. She is running oh so sweet and i cant wait to tear it up on a track.

Added reply in a thread 1992 Rm125 my first love 10/4/2018 12:18 PM

Been some time since i got time. I am still awaiting some jets to fine tune the carb. Just rebuilt the rear wheel. New bearings &spokes . Rebuilt rear caliper and front. Hooked up a front brake line guide as the oem wont fit with new plastics. The

... more »

Added reply in a thread 1992 Rm125 my first love 9/9/2018 2:01 PM

Some progress! Finally sorted out the carb issue. I will be using the 38mm carb from the 01 rm. I got a spacer machined to fit snugly. The only issue is that i need to remove the airbox everytime i wanna change a jet or remove the carb. However ill sort

... more »

Added reply in a thread 1992 Rm125 my first love 9/5/2018 11:26 AM

The engine is finally assembled. Just completed and passed the leak down test. Everything seems goood to go. Just to fit the tank and try starting her up

Prev owner had no washer on the clutch basket. Lord knows how that ... more »

Added reply in a thread 1992 Rm125 my first love 9/1/2018 1:19 PM

Rigged up a spacer to reach the carb. Once this fits and holds ill.prob have a shop lathe this as 1 piece. So far it looks promising!!