K-Dub613's Forum Activity

Reply to Motocrossed 3/25/2020 8:32 AM

BOOOOOMMMMMM Game changer!

smile
Reply to Thoughts on Chiropractors? 1/7/2020 7:57 AM

My uncle is a chiropractor and I enjoy getting a realignment from time to time. The adjustments, for me, are relieving and help. If you haven't tried one, give it a shot and see how you like it.

Reply to WTB: KX250F/KX450F Aftermarket Triple Clamps 3/7/2019 6:19 AM

I have some RIDE Engineering Triples with a brand new bar mount kit. They are 22MM Offset. The upper has been milled out for A Kit, but you could probably shim them. I can make you a smoking deal. PM me if you are interested, these things will be sitting. ... more »

Reply to Showa A-kit suspension (kawasaki) 2/9/2019 10:47 AM

PM sent as well

Reply to WTB Showa A Kit Shock 2017 KX450 2/3/2019 9:17 AM

Sounds good. Thank you

Reply to 2014-2018 kx450f issues/fixes, new bike question 2/3/2019 7:06 AM

I have a 17 and love it. As many would agree, the suspension is the “issue” with the bike. I went ahead and went ahead with A kit. Love this bike!

Reply to WTB Showa A Kit Shock 2017 KX450 2/3/2019 7:01 AM

Thanks for the info. I will look into these as well.

Reply to WTB Showa A Kit Shock 2017 KX450 2/3/2019 7:01 AM

Can you both email me some pictures Kdub613@yahoo.com Thanks

Reply to Showa A Kit 49mm Spring Forks,PC A kit Shock KX250F/450F 10/30/2018 7:21 AM

DM Sent

Reply to KX450F Fork Options 4/8/2018 9:35 PM

I have a 2017 KXF450 and I love the bike. I couldn't get around to liking the air fork so I turned to PC Spring Conversion. I loved the forks. A noticeable difference in handling. Then I had a wild hair to burn money in my pocket and I am glad I did....I ... more »

Reply to 18 kx 450 suspension 3/12/2018 10:05 AM

I have a 2017 KX450 and fought with the air settings for a few weeks. I went with a Pro Circuit Spring Conversion and resprung my rear/re-valve and it works really well. Had to adjust the clickers to the track conditions, but no complaints

Reply to Showa SFF Spring A Kit Fork Help 2/23/2018 10:03 AM

I’m not sure if you still have your oem, but could you measure the fork tube length just for comparison. When and if you get time. Thanks

Reply to Showa SFF Spring A Kit Fork Help 2/23/2018 9:09 AM

Ok, thank you for the confidence booster with these forks. I was getting a little scared since they can be a expensive. I am hopeful my PC can make this work like a dream for me. Do you have the SFF spring on your bike ?

Reply to Showa SFF Spring A Kit Fork Help 2/23/2018 7:47 AM

I plan on calling and sending them to PC for service and set up today. I would imagine they could get it all taken care of to meet my specifications. I should have mentioned (may sound dumb) but I had PC do a spring conversion on my OEM forks, then I

smile
... more »
Reply to Showa SFF Spring A Kit Fork Help 2/23/2018 7:18 AM

Thank you for the response. I just checked it and it matches the spring side at 11-1/4". My OEM are 12-1/4". Now this is a basic measurement as I am only measuring exposed lower fork tube length from bottom of seal to top of fork lug. I just don't want ... more »

Reply to WTB Adam Enticknap jersey 11/27/2017 8:12 AM

Send me DM with all of your info. Might be able to get you a 723 jersey

Reply to 03 CR250 Electrical issues HEEELLLPPP 9/15/2017 7:35 AM

I owned one recently and had some electrical problems as well. I noticed you have pretty much replaced all the electrical parts. I would double and triple check the wiring going into the CDI and check the ground connections. My bike would fire, but the ... more »

Reply to Showa SFF TAC kx 8/23/2017 6:20 AM

Or you can call JGR. They have a conversion that is similar to PC. It has an Air Assist (I think anywhere from 0-30 PSI) if you want it. Mine came with 10 PSI and its perfect. PC told me the same thing and then they said just send them in. It took around ... more »

Reply to Need a Zero to Hero workout 8/21/2017 8:52 AM

Hey there Dan, I am in a similar place as well, only 34

smile
. We weigh about the same as well. I have a few friends that into fitness and do the competition thing. I never wanted to be like that, but what I used them for was for dieting and workout ... more »
Reply to Showa SFF TAC kx 8/21/2017 8:35 AM

I have a 2017 KX450 and sent my forks off to Pro Circuit for their Spring Conversion. I absolutely love them. I would recommend PC Spring conversion and hanging on to the forks you have. I think I paid around $800 for the spring conversion and the spring ... more »