Jon_Haynes's Forum Activity

Reply to tire size for the 85 kx? 2/21/2020 2:32 PM

Hoosier 80/100-21 and Hoosier 110/100-18 on my 1985 kx 125

Reply to Cerakote clear coat exhaust pipe 2 stroke 2/11/2020 10:12 AM

For best results parts should be bead blasted but we don't want our pipes blasted so yes the smooth finish does hurt it a bit. I am certified with cera coat and I have done my personal pipes. As I said I have a problem with me knee rubbing the finish ... more »

Reply to Cerakote clear coat exhaust pipe 2 stroke 2/10/2020 6:27 PM

I have done a few. I think it really helps for the back side where its hard to clean but I do wear through it with my knee.

Reply to MOOSE Qualifier jersey & pants, $30.00 1/31/2020 4:19 PM

I could do 30 plus shipping send me a email with info. bowmeisters@yahoo.com

Reply to Michael Leib to Team Vital MX for San Diego 1/31/2020 12:00 PM

I have a kick ass jersey coming. GO TEAM VITAL.

Reply to 1988 yz 250 plastic 11/18/2019 5:05 PM

before pic

Reply to 1988 yz 250 plastic 11/18/2019 4:58 PM

ok, here is a pic of the build, not done yet but getting close.

Reply to 1988 yz 250 plastic 10/24/2019 2:16 PM

Thanks KHI guy. I ordered a set of UFO for the 89 already. I was going to make them work but glad to know I wont have to (make them) fit.

New thread 1988 yz 250 plastic 10/22/2019 6:15 PM

I am looking for radiator shrouds for a 88 yz 250. Do any other years fit correctly? finding mixed results on that. Thanks.

This forum thread has 7 replies.

Reply to 2003 Langston Red Bull KTM graphics 10/20/2019 7:58 AM

I will buy them. getting ready to leave for a few hours but send me your info and pay pal please. Thanks jon

Reply to 70,s bikes what you got? 6/1/2019 8:16 AM

My

78 YZ 250
Reply to Let's see your 80's Bikes 5/24/2019 4:56 PM

Here is one of mine, fun bike

Reply to Gold wheels thread... 4/27/2019 1:53 PM

I will play

Reply to Can We Get... 4/21/2019 5:14 PM

Newman is correct this is moto, moto= 2 stroke

New thread 1999 RM125/144 4/21/2019 5:03 PM

The bike has a FMF shorty on it, but is that the best choice? What is the best for a broad range of power? And does anybody have a good used one laying around ? Thanks guys

This forum thread has 0 replies.

Reply to 1999 RM 144 anti freeze leak 4/20/2019 5:38 PM

one of my crush washers was deformed, I sanded it on a surface plate and the low spot was still visible so I put new ones on. I will give it another heat cycle this week but I think I will be leak free. Thanks guys.

Reply to 1999 RM 144 anti freeze leak 4/17/2019 5:49 PM

crush washers are bagged with the acorn nuts also thicker than banjo bolt washers. but I think I found the problem. thanks for the help guys.

Reply to 1999 RM 144 anti freeze leak 4/17/2019 1:59 PM

Crush washers were new and a torque wrench was used, heck I even used the torque wrench on my sprocket bolts, While I ate pizza and took a nap hahaha. anything else I should look for before I try again? Crush washers were not OEM but from a spec bolt ... more »

New thread 1999 RM 144 anti freeze leak 4/17/2019 12:35 PM

Is it possible on a 99 RM that water could come up through a stud ? it looked like the small leak was coming out from under one of the head nuts. I could be wrong but before putting on new orings should I pull the studs and make sure they have some sort ... more »

This forum thread has 8 replies.

Reply to Footpegs for a 1984 KX 125 4/15/2019 4:57 PM

I put RM80 foot pegs on my 1985 KX 125, they are perfect. Not sure 84s are the same but it worth a look. Jon