GoggleFiend904's Forum Activity

Reply to Tomac records at Fox Raceway 8/28/2022 1:58 PM

I just checked the stats thread another poster made and tomac has 12 to chases 8

Reply to Your best glove. 8/28/2022 11:33 AM

I think my current gloves are leatt. Over the last couple years I’ve used thinner and thinner gloves and now it’s all I like to use

Reply to Very subjective question (Best suspension company) 8/24/2022 10:03 PM

With wp I would lean towards jbi or AEO (mark Johnson was a factory ktm suspension guy)

Reply to Hymas at NGPC this weekend? 8/21/2022 9:01 PM

It’s a mix of mx, off road, and sometimes enduro stuff

Reply to The Waterboy of moto strikes again; Barcia is just dangerous and does not belong out there? 8/21/2022 6:04 PM

That’s pretty amazing ^^^ lol

Reply to Hymas at NGPC this weekend? 8/21/2022 3:19 PM

Beating second place by 40 seconds is very impressive. Especially when you consider how fast his competition is

Reply to 2004 CR250r build PR2 cylinder & head UPDATE 8/21/2022 6:04 AM

Mostly turn around time and I’m also in the process of trying to get a stock 06 250 off of my brother. That’s not a forsure thing yet so I’m thinking I’ll run the new stock cylinder for atleast a month until I find out if the 06 deal will work out. I ... more »

Reply to Crankcase repair? 2001 KX250 8/21/2022 5:05 AM

Amazing work ^^^

Reply to Crankcase repair? 2001 KX250 8/20/2022 9:42 PM

A good tig welder can fix it no problem. I found a similar issue on a 06 kx case yesterday

Reply to How many of you would claim a bike? 8/18/2022 6:38 PM

More than it cost. And when I was done with the bike it was worth half of the original cost. don’t be me

Reply to cr250 2002 keihin carb setting 8/18/2022 6:31 PM

I appreciate the info. I don’t have a problem with the TMX, just going to search for a little more low end power. I bought the carb off eBay and was listed as a 99. I wanted to atleast give it a try because I plan on getting another 3rd gen cr

Reply to 2004 CR250r build PR2 cylinder & head UPDATE 8/18/2022 2:07 PM

I’ve spoken with TM and am definitely going to use him in the future. I haven’t made up my mind completely on who will do this setup just yet. There is a good chance I will send it off to him

Reply to cr250 2002 keihin carb setting 8/18/2022 11:19 AM

I just picked up a 99 kx250 carb that I plan on running on my 04 CR. Does anyone have the contact info for the guy that makes the TPS harness/adapter?

Reply to Why not run an off road tank? 8/17/2022 9:05 PM

I recently put an IMS on my cr250, I can’t stand it. I did like the xc tank on my sx though, obviously the fit was great. I really wish someone would make a slightly larger tank, no 3+ gallons. 2.5 would be perfect for me

Reply to 2003 yz125 cylinder repair/replace 8/16/2022 6:26 PM

That needs to be repaired. Call millennium and get a quote on a repair and replate. Count on it being a little higher than their quote, and look into a new cylinder. It may come out close to the same price and you wouldn’t have as much down time.

Reply to 2004 CR250r build PR2 cylinder & head UPDATE 8/15/2022 5:26 PM

Update. I filed a claim for a charge back a few weeks ago. I haven’t heard anything from Jeff at PR2, I don’t imagine he will fight me on this. If so, I’ll go through small claims and get a new cylinder on top of the charge back. I’ve ran 5 gallons of ... more »

Reply to ISO RG3 second gen 1 1/8 bar mounts 8/12/2022 8:07 AM

That’s some good information, I already asked Brian about replacement cones so that should save us some time in the future. Luckily I do have a pretty fresh set for now. Thank you

Reply to ISO RG3 second gen 1 1/8 bar mounts 8/11/2022 8:59 PM

Mounts came today. I appreciate you and the stickers 👍

Reply to 2006 KX250 build 8/11/2022 9:11 AM

Reply to 2006 KX250 build 8/11/2022 8:40 AM

The build isn’t going to be done this weekend. The cylinder is cracked and the lower end is getting built. Now I have to decide who’s going to do the cylinder and head mods

... more »