Added reply in a thread Anderson under review? 3/13/2021 7:00 PM

Looked like aggressive racing to me. If anything, Malcolm should be under investigation I’d think.

Added reply in a thread 1995 kx500 build 3/12/2021 12:00 PM

Edit

Added reply in a thread 1995 kx500 build 3/12/2021 11:59 AM

Awesome. Thank you very much

Added reply in a thread 1995 kx500 build 3/12/2021 6:49 AM

Do you by chance know of any after market peg mounts or pipe mounts for the 500s?

Added reply in a thread Maxima castor 927 and power valves 3/2/2021 8:38 PM

I wouldn’t worry about it. Supposedly the protection of that 927 can’t be beat. I imagine it’s been refined a few times over the years to be cleaner. I never ran it when I was younger because I heard it was gummy. That definitely doesn’t seem to be the ... more »

Added reply in a thread Maxima castor 927 and power valves 3/2/2021 8:08 PM

I switched to it and noticed no difference in cleanness from motul or k2. Sunoco 110 @40:1. Doesn’t seem dirty at all these days

Added reply in a thread KYB .11/.12 shims 3/2/2021 6:24 PM

Does sdi carry the kyb .11? I’ve been looking around also and can’t seem to find them. I may have seen them in packs of ten somewhere, but I don’t really want to buy packs of multiple sizes

Added reply in a thread Can you ride without fork rebound damping rod? 2021 Kx450 2/27/2021 5:15 PM

I’m mostly familiar with wp forks, where that isn’t the case. Either way, I’m glad you chimed in

Added reply in a thread Can you ride without fork rebound damping rod? 2021 Kx450 2/27/2021 9:25 AM

All I will say is I’ve had the delta shims rotate on my piston, which led to basically zero rebound dampening on one fork. I felt my suspension getting shitty and assumed it was just an off day like I normally have. It felt like garbage and wasn’t predictable, ... more »

Added reply in a thread Can you ride without fork rebound damping rod? 2021 Kx450 2/27/2021 9:02 AM

The rod moves up and down when adjusting the clickers. When you pull the rod out you will lose the adjustment you just made and your clicker setting would be all the way out

Added reply in a thread Can you ride without fork rebound damping rod? 2021 Kx450 2/27/2021 8:44 AM

I wouldn’t recommend it, but if I was to ride without the dampening rod, I would go in quite a bit on the other rebound adjuster to offset the light dampening in the other fork.

Added reply in a thread Can you ride without fork rebound damping rod? 2021 Kx450 2/27/2021 8:26 AM

I think your rebound would be all the way out (no dampening) without the rod

Added reply in a thread 89 cr125 motor question 2/26/2021 8:07 PM

I believe both are hpp power valves.

Added reply in a thread TRAVIS PASTRANA!!!!! 2/25/2021 11:06 AM

Wat

Added reply in a thread Damn husky bolt 2/23/2021 6:15 AM

It should be left hand. I believe mine is torqued to 140ftlbs, so it may be hard to get off without the clutch basket on and binding the gears with the motion pro tool

Added reply in a thread Shock body unscrewing itself 2/21/2021 8:34 PM

I could see that. Mine actually unscrewed I believe

Added reply in a thread Shock body unscrewing itself 2/21/2021 4:42 PM

It happened to me recently. Not sure how or why

Added reply in a thread Mcadoo WTF 2/21/2021 9:22 AM

I’m still surprised he hit a downed rider..

Added reply in a thread Orlando 2 Supercross - Night Show Bench Racing 2/20/2021 6:09 PM

Weren’t they going slow, coming up on a downed rider with a medic right next to him? It’s not like he landed off a blind jump

Added reply in a thread Orlando 2 Supercross - Night Show Bench Racing 2/20/2021 6:00 PM

I’d hope so