Added reply in a thread 2020.5 Rockstar 450 connectivity unit issues, *not connecting* 3/17/2021 7:40 AM

I work here at a dealer in FL and was told the same thing from our KTM rep. 2021.5 Factory and 2021 regular bikes only. Ryan

Added reply in a thread Group Buy - KYB DLC Shock shafts for Yamaha (poss Honda, Suzuki & Kawasaki) 3/13/2021 7:55 AM

Are these just the new shafts or are these coated new shafts? Just curious but will be buying one anyway. How can I get on the list? Ryan

Added reply in a thread Star Racing/FMF Exhuast Heat Shield 3/6/2021 12:30 PM

They are welded to the pipe. I bought one of the teams used pipes online and it has it. FMF wont sell them and I have no way of figuring out how to mount it to the pipe I need it on. LOL Ryan

Added reply in a thread YZ250F 2019 Purchase 3/3/2021 4:53 PM

Yea definitely need the Moly Lube. Ryan

Added reply in a thread YZ250F 2019 Purchase 2/27/2021 1:02 PM

Yes sir, you are correct. Torque all bolts, loosen one at a time and then seat the bolt all the way down then torque to 11. Repeat for the other 3. Degree all bolts 60 degrees. Repeat degree all to 60 degrees. Tighten 2 outer nuts. Biggest thing to do ... more »

Added reply in a thread YZ250F 2019 Purchase 2/27/2021 12:57 PM

There is 1 compression ring and 3 oil rings. I highly recommend the service manual due to all of them being different orientations. Ryan

CAPPERMAN left a comment 2/19/2021 9:18 PM
CAPPERMAN

2017 YZ125 CASES DO U STILL HAVE THEM?

Added reply in a thread What does a day of suspension tuning look like? 2/17/2021 2:00 PM

Your absolutely right, the key is to have it bottom at most once or twice a lap on an odd obstacles like sending a single way out and not checking up on it, but when it bottoms not to have a harsh bottom and to have it become predictable and not wrecking ... more »

Added reply in a thread 2020 YZ250f "Lurching" on heavy acceleration 2/16/2021 11:44 AM

Good afternoon, I have found in my experience that Tusk clutches last a few rides at most. I am really hard on clutches period but can usually get 10-15 out of the stock clutch, however I barley got 2 out of the Tusk. Go back stock or go Hinson, Barnett, ... more »

Added reply in a thread WTB- 17 yz250f wheels set 2/16/2021 11:39 AM

Just a fyi front wheels only from 2014 an newer will bolt straight on. Rear wheels from 2009 and newer will bolt straight on. Thanks, Ryan

Added reply in a thread Matrix fuel jug had failed - they stand behind their products 1/7/2021 2:16 PM

This is why I have been using Matrix Concepts for as long as I have. I have stacks of stands and mats, as I like new ones every year and they don't break so I just keep them in the corner and give away or use for projects all the time. Customer service ... more »

Added reply in a thread Anybody that used 2021 SXF 250 Nature Bakery graphics on black frame? 1/2/2021 12:05 PM

I see, just a heads up I would remove that response as it is VERY copy right protected. Just trying to help ya out. Ryan

Added reply in a thread Anybody that used 2021 SXF 250 Nature Bakery graphics on black frame? 1/2/2021 11:56 AM

Just a heads up, to get them from a dealer you have to have proof of purchase of that vehicle to order them. You generally cant just walk in and order them. Same as the Redbull factory set. Ryan

Added reply in a thread Two stroke smell 12/22/2020 12:45 PM

VP MRXO2 with caster 927 is my preference but its a fuel that the bike needs to be set up to run correctly and to be able to get the most out of the fuel. Not cheap ether unfortunately. Ryan

Added reply in a thread Luck with ceramic bearings? 12/11/2020 5:12 PM

On my 125s I have yet to have an engine failure thus far. I change everything often so there is less of a chance. On my 250F's it was still beneficial for crank bearings to be ceramic and I have ran cranks longer then I normally would a time or two. ... more »

Added reply in a thread Ported/Mod 250 2 stroke reliability and maintenance 2018 250SX 12/10/2020 1:33 PM

Generally anything with more compression is going to wear out pistons and cranks faster, also generally with modified 2 strokes you go to a single piston ring which allows less friction and more performance but that will wear faster aswell. So generally ... more »

Added reply in a thread Anyone selling a new take-off set of KTM 125/250f wheels? 12/10/2020 11:43 AM

I want to say they were unbranded EXCEL's that year. Looks identical to the ones I have seen from my friend groups.' Ryan

Added reply in a thread Luck with ceramic bearings? 12/10/2020 10:36 AM

I am not to sure of the brand, unfortunately, as the engine builder made the recommendation to use them and I am glad that I listened. as far as hours go, I change them every 3rd piston installed. I change pistons every 10 hours or close to it, so roughly ... more »

Added reply in a thread Luck with ceramic bearings? 12/10/2020 8:21 AM

I use them in my engines all the time, they have great benefits. I was told not to run them anywhere where they can come in contact with debris or dirt, like wheel bearings etc. as you will be replacing them like crazy as they wear out fast. In the engine ... more »

Added reply in a thread Age-old question: 2016 YZ250F --- How many hours can I safely go on a top-end? 11/17/2020 10:44 AM

I had a 2016, 2018 and a 2019. Each bike had polished heads, HC Carrillo pistons, Athena Get Ecu, Full FMF, balanced and trued cranks. VP Pro 6 fuel. I am a A class mx and woods rider. I rode the bikes hard, mid to higher rpm with shifting at the limiter. ... more »